Installation Guide

26
27
1. In the data search screen, use the up ,
down , left , and right keys to
enter the number of the row being searched.
2. Press the conrm key to select the
yes option.
3. Press the conrm key again to go to
that row.
GENERAL SETTINGS
All the console settings and system information are in the setting menu, press the up /down key to
select the section required, then press the right key to enter the sub items of the section.
TIME & DATE SETTING
SEARCHING FOR A ROW OF DATA
Press the up /down key to select one of the following settings:
Press the up /down key to select one of the following settings:
ALARM TIME SETTING
24
4.8 DATA LOG SCREEN
This function can capture the all history records of the whole system, plug the USB compatible ash drive
(not included) to the USB socket to start record the weather data.
7
1 2 4 3 5 6
1. Number of row
2. Record time and date
3. Indoor temperature and humidity
4. Baro Pressure
5. Outdoor temperature and humidity
6. Temperature index
7. Percentage of data storage remain
1. Press
[ HOME ] key, during other mode to show the key function icons.
2. Press
key to show the Data log screen.
4.8.1 DATA LOG SCREEN OPERATION
- Using the , , or key to browse
the data in di󰀨erent row and column.
- Press
to show the DATA SEARCH
SCREEN.
NOTE:
Data log screen can only view the data in
current recording log le, if you want to view
the older les in the USB ash drive, you
need to use the PC to view by using excel or
other CSV le viewer.
4.8.2 SEARCH THE ROW OF DATA
1. In DATA SEARCH SCREEN, using the
, , or key to enter the number of
the row in the current record le.
2. Once you complete, press key to select
Yes.
3. Press key to go to that row.
25
4.9 SETTING MENU
1
2
3
4
5
6
7
8
9
1. Time & Date setting
2. Alarm setting
3. Display setting
4. Unit setting
5. Sensor setting
6. Alert setting
7. Calibration setting
8. Other setting
9. Data log setting
All the console settings and system information are in setting menu, press / key to select the section
required, then press key to enter sub items of the section.
4.9.1 TIME & DATE SETTING
a
b
c
d
e
f
g
h
i
In this section, press / key to select the sub items.
# Sub item Operation
a Internet time sync
Press / to turn on or turn o󰀨
b Time format
Press / to select 12 or 24 format
c Time set
When time sync is o󰀨, press / to select between hour or minute, press
/ to adjust the value.
d Date format
Press / to select M / D or D / M format
e Date set
When time sync is o󰀨, press / to select month or date, press / to
adjust the value.
f Year set
When time sync is o󰀨, press / to adjust the value.
g Daylight saving time
Press / to turn o󰀨 or set the DST to auto.
h Time zone
Press / to select the your local time zone to get correct time.
i Hemisphere
Press / to select NORTH or SOUTH hemisphere for the 7-in-1 sensor
point to and moon phase.
25
4.9 SETTING MENU
1
2
3
4
5
6
7
8
9
1. Time & Date setting
2. Alarm setting
3. Display setting
4. Unit setting
5. Sensor setting
6. Alert setting
7. Calibration setting
8. Other setting
9. Data log setting
All the console settings and system information are in setting menu, press / key to select the section
required, then press key to enter sub items of the section.
4.9.1 TIME & DATE SETTING
a
b
c
d
e
f
g
h
i
In this section, press / key to select the sub items.
# Sub item Operation
a Internet time sync
Press / to turn on or turn o󰀨
b Time format
Press / to select 12 or 24 format
c Time set
When time sync is o󰀨, press / to select between hour or minute, press
/ to adjust the value.
d Date format
Press / to select M / D or D / M format
e Date set
When time sync is o󰀨, press / to select month or date, press / to
adjust the value.
f Year set
When time sync is o󰀨, press / to adjust the value.
g Daylight saving time
Press / to turn o󰀨 or set the DST to auto.
h Time zone
Press / to select the your local time zone to get correct time.
i Hemisphere
Press / to select NORTH or SOUTH hemisphere for the 7-in-1 sensor
point to and moon phase.
1. Time & date setting
2. Alarm setting
3. Display setting
4. Unit setting
5. Sensor setting
6. Alert setting
7. Calibration setting
8. Other setting
9. Data log setting
4.3.7 WATER LEAK (OPTIONAL LEAK SENSOR)
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2.1)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
y 4 seconds.
4.3.8 WIND
# Sub item Operation
a Internet time sync
b Time format
Press / to turn on or turn o
Press /
to select 12 or 24 format
c Time set When time sync is o, press / to select between hour or minute, press
/
to adjust the value.
d Date format Press
/ to select M / D or D / M format
e Date set When time sync is o, press
/
to select month or date, press / to
adjust the value.
f Year set
to adjust the value.When time sync is o, press /
g Daylight saving time Press / to turn o or set the DST to auto.
h Time zone Press / to select the your local time zone to get correct time.
i Hemisphere Press
/ to select NORTH or SOUTH hemisphere for the 7-in-1 sensor
point to and moon phase.
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2.1)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
y 4 seconds.
4.3.8 WIND
4.3.8.1 WIND SPEED AND DIRECTION SECTION OVERVIEW
Real time wind
direction indicator
Wind direction
Past wind directions
indicator of last 5
minutes (maximum 6)
# Sub item Operation
a Alarm time set Press
/ to select between hour or minute. Press / to adjust the value
b Alarm mode Press
/ to select Everyday or Weekday only
c Alarm Press to turn on or turn o
to turn on or turn o.
/
d Ice pre alert Press /
e Alarm sound level Press
/ to adjust the sound level
f Key tone level Press to adjust the key tone level (default is o)
/
26
4.9.2 ALARM TIME SETTING
a
b
c
d
e
f
In this section, press / key to select the sub items.
# Sub item Operation
a Alarm time set
Press / to select between hour or minute, press / to adjust the
value.
b Alarm mode
Press / to select Everyday or Weekday only
c Alarm
Press / to turn on or turn o󰀨.
d Ice pre alert
Press / to turn on or turn o󰀨.
e Alarm sound level
Press / to adjust the sound level
f Key tone level
Press / to adjust the key tone level (default is o󰀨)
4.9.3 DISPLAY SETTING
a
b
c
d
e
f
g
h
i
In this section, press / key to select the sub items.
# Sub item Operation
a Language
Press / to select the display language
b Background color
Press / to select light or dark color background for display mode
c Night mode
Press / to set enable (trigger to the activate time period), disable or
auto (trigger by your room ambient light level)
d Night mode activate
time
Press / to select between hour or minute press / to adjust the
value.
e MAX / MIN record
mode
Press / to select MAX / MIN data records mode by Accumulate (Acc.)
or daily.
f Back light level
Press / to adjust the back light level in normal
g Back light level
(Night mode)
Press / to adjust the back light level during night mode
h Contrast
Press / to adjust the screen contrast
i Brightness
Press / to adjust the screen brightness