™ 7-IN-1 WIRELESS 8-DAY FORECAST WEATHER STATION WITH WI-FI,® EVERLASTING SOLAR CELL, & ULTRA-WIDE DISPLAY USER GUIDE LOWSC717FWB19
Thank you for purchasing the Logia 7-in-1 Wireless 8-Day Forecast Weather Station with Wi-Fi, Everlasting Solar Cell, and Ultra-Wide Display. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. ® Please read all directions before using the product and retain this guide for reference.
SAFETY PRECAUTIONS WARNING! Please read and understand all safety precautions, operating instructions, and care/maintenance instructions before operating this appliance. Keep this manual for future reference. • This product is not a toy. Keep out of the reach of children. • This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. • Do not clean the unit with abrasive or corrosive materials.
PRODUCT FEATURES 1. Wireless 7-in-1 weather sensor measures wind speed, wind direction, rainfall, UV index, light intensity, temperature, and humidity 2. No calibration needed! The product is fully pre-calibrated and mostly assembled; all you need to do is install it and sync with the included display console 3. Provides precise weather and environmental information directly from your own backyard, instead of relying on a national weather station 4.
display console to avoid signal intermittent problem. 3 . Distance. Path loss occurs naturally with distance. This device is rated to 150m (450 fee by line of sight (in interference free environment and without barriers). However, typicall you will get 30m (100 feet) maximum in real life installation, which includes passing thro barriers . 4 . Barriers . Radio signal are blocked by metal barriers such as aluminum cladding .
PRODUCT OVERVIEW WEATHER CONSOLE OVERVIEW 1 2 3 4 6 7 10 5 8 9 11 Time & Data, Moon phase, Sunrise / sunset & moon rise / moon set Wind direction & speed Solar Light intensity UV index Rainfall & Rain rate 6 . Sky condition 7 . Air quality 8 . Barometer 9 . Indoor / CH temperature & humidity 10 . Outdoor temperature & humidity 11 .
LCD DISPLAY OVERVIEW 4. 4.1 DISPLAY CONSOLE FUNCTIONS AND OPERATION SCREEN DISPLAY 1 2 3 4 6 7 10 5 8 9 11 1 . Time & Data, Moon phase, Sunrise / sunset & moon rise / moon set 2 . Wind direction & speed 3 . Solar Light intensity 4 . UV index 5 . Rainfall & Rain rate 4.2 DISPLAY CONSOLE KEYS 1. Time & date, moon phase, sunrise/ sunset & moon rise/moon set 2. Wind direction & speed 3. Solar light intensity 4. UV index 5. Rainfall & rain rate 6 . Sky condition 7 . Air quality 8 . Barometer 9 .
WIRELESS SENSOR OVERVIEW 3. 3.1 GETTING STARTED WIRELESS 7-IN-1 SENSOR 1 G STARTED ESS 7-IN-1 SENSOR 3. GETTING STARTED 3.1 WIRELESS 7-IN-1 SENSOR 2 5 3 4 6 9 10 1. Antenna 7 2. Radiation shield & Thermo-hygro sensor 7. Bubble level gradienter 8. Rain collector 8 3. Mounting parts (fit for 35 ~40mm diameter pole) 4. Battery door 11 9. Wind vane 10. UV / light sensor 5. [ RESET ] key 11. Solar panel 6. Transmission status LED 12. Wind cups 12 7.
1. Antenna 2. Radiation shield & hygro-thermo sensor 3. Mounting base 4. Battery door 5. RESET button 9. Wind vane 7. Bubble level 11. Solar Cell 6. Transmission status LED 10. UV/light sensor 8. Rain collector 12. Wind cups INSTALLATION INSTRUCTIONS SETTING UP THE WIRELESS 7-IN-1 OUTDOOR SENSOR The wireless 7-in-1 outdoor sensor measures wind speed, wind direction, rainfall, UV, light intensity, temperature, and humidity.
Lock grooves 1 Align NSTALL RAIN GAUGE FUNNEL he rain gauge funnel and rotate clockwise to lock the funnel to the sensor array Installation INSTALLINGRain THECollector BATTERIES 2 Lock 1. Unscrew the battery door at the bottom of the 7-in-1 outdoor sensor using a screwdriver (not included). Lock grooves NSTALL RECHARGEABLE BATTERIES Unscrew the battery door 1atAlign bottom of unit and take cable socket.
4. Close and fasten the battery door back on the compartment. lose the battery door and tighten the screw Step 5: Close the battery door and tighten the screw emove the solar panel protection film. se the battery door The and tighten thewill screw NOTE: LED light flash red every 12 seconds. ADJUSTING THE SOLAR CELL Step 6: Remove the solar panel protection film. E: ONLY the rechargeable 3.6V Ni-MH battery-pack provided. 1. Remove the protection film on the solar cell.
3. Adjust the vertical angle of the solar cell to get the most optimal usage out of the solar cell depending on your location. ep 2: Adjust the vertical angle of the solar panel (0°, °, 30°, 45°, 60°) according to the latitude of your ation. Step 2: Adjust the vertical angle of the solar panel (0°, 15°, 30°, 45°, 60°) according to the latitude of your location. ep 3: Push the gear and tighten the screw until the ars are securely locked. 4.
INSTALLATION AND SETUP Your console can pair up with one wireless 7-in-1 outdoor sensor and up to 7 wireless indoor sensors. (1pc wireless indoor sensor included) MOUNTING THE SENSOR ON A POLE 1. INSTALL WIRELESS 7-IN-1 SENSOR Your wireless 7-IN-1 sensor measures wind-speed, wind-direction, rainfall, UV,oflight Stick the rubber pads on the inside of the mounting clamp and mounting base theintensity, sensor. Adjust the vertical angletemperature of the solarand panel (0°, for you.
POINTING THE WIRELESS 7-IN-1 OUTDOOR SENSOR TO SOUTH (OPTIONAL) The outdoor wireless weather sensor is calibrated to be pointed north for maximum accuracy. However, for your convenience, if you are a user located in the Southern Hemisphere, you can use the sensor with the wind vane pointing south. 3.3 RECOMMENDATION FOR BEST WIRELESS COMMUNICATION 1.
Concrete wall Aluminum siding Metal wall Remarks: RF signal reduction for reference 80 ~ 90% 100% 100% THECONSOLE CONSOLE 3.4 POWERING SETUPUP THE Follow procedure to setup the console connectionpower with sensor(s) WI-FI. 1. theConnect the power adapter to the integrated cord of theand console. 3.4.1 POWER UP THE DISPLAY CONSOLE 2. Plug the power adapter into a power outlet to turn on the console. 1. Install the back-up CR2032 battery 3.
Sunny 3 CHANNEL 4 FORECAST 5 Light RAIN rain Partly cloudy Cloudy / Foggy Overcast Windy Press this button to switch between indoor and channels readings Press to view the HI/LO temperature from today to next 3 days Pressrain to switch between Rate, rainfall Heavy Partly Rain cloudy Partly cloudy Thundery Press to switch between maximum and with minimum with light rain heavyvalues rain of Daily and Since last reset Press to switch between average wind speed, wind gust and Beaufort Scale Press and hold
4.3.2 HIGH / LOW TEMPERATURE FORECAST FOR TODAY & NEXT 7 DAYS By default, the console shows the High (HI) and Low (LO) temperatures of current day and next 7 days . 4.3.2 HIGH / LOW TEMPERATURE FORECAST FOR TODAY & NEXT 7 DAYS By default, the console shows the High (HI) and Low (LO) temperatures of current day and next GH / LOW TEMPERATURE 7 days . FORECAST FOR TODAY & NEXT 7 DAYS the console shows the High (HI) and Low (LO) temperatures of current day and next High / Low temperature mode 4.3.
6 7 8 9 Humidity - If temperature /[humidity is below will show “Lo”. If temperature / Pressreading / INDEX ] or [ the /measurement MODE ] key torange, adjust the the reading day Day 4. Outdoor humidity is above reading the measurement range, the reading will show “HI”. 5.
reading and status of the indoor, optional hygro-thermo sensor(s) and water for CH sensor th icon 11 2 2 3 3 4 4 5 5 66 7 7 8 8 9 9 10 10 section icon atus section icon 1. ection Low battery indicator for CH sensor 2. Sensor signal strength icon 3. Channel number icon 4. Auto loop icon 18 5. Temperature reading section 6. Indoor icon 7. Floating pool sensor icon 8. Water leak sensor status section 9. Soil moisture sensor icon 10.
Hygrometer sensor (optional, refer to section 3.2). Press the [ CH ] key to switch between D SCROLLindoor MODEand FOR OPTIONAL SENSORS Channels 1 to 7 . DThermoSCROLL MODE FOR OPTIONAL SENSORS efer to section For function, just just presspress and hold thehold CHANNEL button for three secondsand and the the icon icon will Forauto-scroll auto-scroll function, and the [ CH ] key for 3 (3) seconds Thermo4.3.5.
11 You can add up to 7 additional Water Leak sensors (optional, refer Violent storm and structural 56 ~ 63 knot to section 3.2.1) damage likely. The channel number(s) the m/s corresponding water leak sensor(s) 28.5 of ~ 32.6 added to the console will shown with the NO LEAKING icon. ≥ 118bekm/h Severe widespread damage to ≥ 74 mph the channelvegetation structures.
BEAUFORT SCALE The Beaufort scale below is an international scale of wind velocities from 0 (calm) to 12 (Hurricane force). Beaufort Scale 22 Description 0 Calm 1 Light air 2 Light breeze 3 Gentle breeze 4 Moderate breeze 5 Fresh breeze 6 Strong breeze 7 High wind 8 Gale 9 Strong gale 10 Storm 11 Violent storm 12 Hurricane force Wind Speed < 1 km/h < 1 mph < 1 knots < 0.3 m/s 1.1 ~ 5km/h 1 ~ 3 mph 1 ~ 3 knots 0.3 ~ 1.5 m/s 6 ~ 11 km/h 4 ~ 7 mph 4 ~ 6 knots 1.6 ~ 3.
1 ~ 3 knot 103 ~ 117 km/h vanes are stationary. Widespread vegetation and structural 0 . 3 ~ 1.5 m/s 64 ~ 73 mph 11 Violent storm damage likely . 6 ~ 11 km/h 56 ~ 63 knots 28.5 ~ 32.6 m/s 4 ~ 7 mph ≥ 118 km/h Wind can be felt on exposed 2 Light breeze skin. Leaves rustle. Wind damage to vegetation Severe widespread 4 ~ 6 knot ≥ 74 mph BAROMETRIC 12 PRESSURE vanesand begin to move. Debris and unsecured Hurricane force structures . ≥ 64 knots 1.6 ~ 3.3 m/s objects are hurled about. 32.
- The sunburn time is based on normal skin type, it is just a reference of UV strength. In general, the darker one's skin is, the longer (or more radiation) it takes to affect the skin. - The light intensity function is for sunlight detection . 4.3.11.2 UV INDEX MODE To current UV index detected by the outdoor sensor . UVshow Indexthe Mode UV index shows the current UV index detected by the outdoor sensor. AIR QUALITY 22 4.3.
29 ~ 38 km/h Branches of a moderate 18 ~ 24 mph size move. Small trees in 5 Fresh breeze 17 ~ 21 knot leaf begin to sway. 8.0 ~ 10.7 m/s SKY CONDITION 39 ~ 49 km/h Large branches in motion. 25 ~ 30 mph Whistling heard in overhead wires. breeze cover according to the device’s location inputted into The sky condition section 6shows the Strong % of cloud Umbrella use becomes difficult. 22 ~ 27 knot PWL. If you have an optional lightning sensor, you can also instantly. Empty plastic bins tip over. 10.
To View the MAX/MIN While in normal operating mode, press the MAX/MIN button to cycle through the MAX/MIN records. Records are displayed in the following order: Daily MAX records > daily MIN records > since MAX records > since MIN records Reset the Total MAX/MIN Records Press and hold the MAX/MIN button for two (2) seconds to reset the MAX/MIN records. NOTE: MOON PHASE - In alarm mode, the “ ” icon will display on the LCD.
Press [ / INDEX ] or [ / MODE ] key to select "Month / Day" or 7 M-D/D-M format 5 Southern Northern determined by time "Day / Month"Moon display Phase format Hemisphere Hemisphere sole. The following 3 Mode Setting procedure 8 ofTime sync ON/OFF Press [ / INDEX ] or [ / MODE ] key to enable or disable Time Sync function. moon phase icons want[ to New set theMoon time you should Time°CSync 1 Temperature unit If you Press / INDEX ] ormanually, [ / MODE ] key toset select or °FOFF outhern Hemispheres.
Press [ / INDEX ] or [ / MODE ] key to select °C or °F Press [ / INDEX ] or [ / MODE ] key to select mm or in Press [ / INDEX ] or [ / MODE ] key to select m/s, km/h, knots or mph TIME, DATE, AND GENERAL SETTINGS 4 Distance unit Press [ / INDEX ] or [ / MODE ] key to select km or mi Press and pressure hold theunit SET button for[two/ (2) seconds setting mode.
- By pressing and hold [ALARM / SNOOZE] key for 2 seconds to stop the alarm and will activate again in the next day - By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the next day. NDEX which is determined NOTE: by the wireless 7-IN-1 sensor's temperature & humidity data DISPLAY BACKLIGHT rature- is between 26°C (79°F) and 50°C (120°F). in 24 hours.
2. Once your account isand created, into it, "Edit and then click “Edit in the drop-down 2. Log in the ProWeatherLive thensign click the Devices" in Devices” the pull down menu. menu to 2. Log in theadd ProWeatherLive a new device. and then click the "Edit Devices" in the pull down menu. 2. Log in the ProWeatherLive and then click the "Edit Devices" Dashboard Step 1 in the pull down menu. Dashboard Account Edit Devices Account Dashboard Unit Display Edit&Devices Step 2 Account Alert Setting 2.
condition will be based on the Latitudes and condition will be based on the Latitudes and TheLongitudes device Mac address can be found on entered, which are also used forthe calculations sunrise, moon rise Longitudes entered, which sunset, are used for backside of theofconsole or inalso the "SETUP" E.g. Device Mac address andmentioned moon set times . calculations of sunrise, sunset,6.3 . moon rise page in section E.g. Device Mac address and moon set times . 00:0E:C6:00:07:10 6 .
SETTING UP WEATHER SERVER CONNECTION 6.3 SETUP THE WEATHER SERVER CONNECTION the information into the following interface “SETUP” page. page. Ensure all information is entered Enter the Enter information into the following webweb interface "SETUP" Ensure all information is Apply prior to to pressing pressing connect the to ProWeatherLive. entered prior totoconnect theconsole console to ProWeatherLive. SETTINGS 6.
ADVANCE SETTING IN WEB INTERFACE Press the “ADVANCED” button at the top of web interface to enter the advance setting page, this page allows you to 6.4 ADVANCE SETTING IN WEB INTERFACE set and view the calibration of thetop console, as well as update firmware version on PC/Mac browser.
CALIBRATION 1. You may enter or change the offset and gain values for different measurement parameters, while viewing the current offset and gain values next to the corresponding boxes. 2. Once you have completed your calibrations, press the APPLY button on the SETUP tab. 3. 6.4.1 The current offset value will update to show the value that you entered (instead of the default CALIBRATION 1.value).
NOTE: UPDATE FIRMWARE Please press "Help" in the should you have any query on the PWL operation. This display console supports OTA (over the air) Function Firmware and WI-FI System Firmware 8.updates MAINTENANCE via any web browser (not mobile browser) on a PC that is connected to Wi-Fi®. The update 8.1 FIRMWARE UPDATE function for both types of updates can be found at the bottom of the Advanced Tab on the wireless The console supports OTA firmware update capability.
6 . The console will restart once the update is completed . 7 . The console will stay in AP mode for you to check the firmware version and all the current setting . Simply press and hold [ SENSOR / WI-FI ] key for 6 seconds to exit AP mode . - IMPORTANT NOTE: Please keep connecting the power during the firmware update process. Please make sure your PC/Mac's WI-FI connection is stable . When the update process start, do not operate the PC/Mac and console until the update finished.
COMPATIBLE DEVICES The display console of the Logia 7-in-1 Wireless Weather Station with Wi-fi®, Everlasting Solar Cell, and 7” Full-Color HD LCD Display can be paired with other add-on sensors like the indoor hygro-thermo and soil moisture & temperature, and lightning add-on sensor. Visit www.logiaweatherstations.com for the most updated list of compatible Logia add-on sensors. TROUBLESHOOTING PROBLEM SOLUTION 7-in-1 wireless sensor is not connecting. 1.
SPECIFICATIONS DISPLAY CONSOLE General Specifications Product type Weather/environment sensor & console Dimensions (W x H x D) 16.5″ x 12.1″ x 1.2″ (419 x 308 x 30 mm) Weight 4.5 lbs. (2034 g) (with battery) Power source DC 5 V, 1.
492' (150 m) RF transmission range Time-related Function Specifications Time display HH:MM Hour format 12 hr. AM/PM or 24 hr. Date display DD/MM or MM/DD Time synchronize method Time received through PWL Weekday languages EN/DE/FR/ES/IT/NL/RU Barometer Display & Function Specifications Note: The following details are listed as they are displayed or operate on the console. Barometer units hPa, inHg, and mmHg Measuring range 540 ~ 1100 hPa Accuracy (700 ~ 1100 hPa ± 5 hPa) / (540 ~ 696 hPa ± 8 hPa) (20.67 ~ 32.
RF frequency Transmission interval 915 MHz Every 12 seconds UV, light intensity, wind speed, and wind direction data Every 24 seconds for temperature, humidity, and rain data Operating temperature range -40 °F ~140 °F (-40 °C ~ 60 °C) Operating humidity range 1 ~ 99% RH Location use for sensor Outdoor use Adult assembly required for sensor Yes Additional tools required for sensor Screwdriver Outdoor Temperature Display & Function Specifications Temperature unit °C or °F Weather index mode Feels like, wind c
LIMITED WARRANTY TO ORIGINAL CONSUMER This Logia 7-in-1 Wireless 8-Day Forecast Weather Station with Wi-fi,® Everlasting Solar Cell, and Ultra-Wide Display (“Product”), including any accessories included in the original packaging, as supplied and distributed new by an authorized retailer is warranted by C&A Marketing, Inc.
The Company does not warrant that the operation of the Product will be uninterrupted or error-free. The Company is not responsible for damage arising from your failure to follow instructions relating to its use.
LOGIA is a trademark of C&A IP Holdings LLC in the US, Canada, China, and the EU. Android and Google Play are trademarks of Google LLC. Apple, IOS, and App Store are trademarks of Apple Inc. in the U.S. and other countries. Microsoft, Windows, Windows Server, Windows Vista, and Windows 10 are trademarks of Microsoft Corporation in the U.S. and/or other countries. Wi-Fi, WPA, and WPA2 are trademarks of Wi-Fi Alliance in the U.S. and/or other countries.
