Instructions / Assembly

ManualsBrandsLogia ManualsGarden Center7-in-1 Wi-Fi Weather Station, Wireless Outdoor Weather Station with Console Monitoring System & Large 10" Color Display

SETTING UP WEATHER SERVER CONNECTION

Enter the information into the following web interface “SETUP” page. Ensure all information is entered

prior to pressing to connect the console to ProWeatherLive.

6.3 SETUP THE WEATHER SERVER CONNECTION

Enter the information into the following web interface "SETUP" page. Ensure all information is

entered prior to pressing

Apply

to connect the console to ProWeatherLive.

WiFi Router setup

ADVANCED

ProWeatherLive

Station ID:

Weather server setup

Station key:

Router:

Add Router

Security type:

Router Password:

WAP2

ROUTER_A

Language: English

Mac address

00:0E:C6:00:07:10

Point to :

Outdoor sensor direction

SETUP

SETTINGS

Apply

Firmware version: 1.00

SETUP page

Press to search router

Press "ADVANCED" icon to

advanced page

Select setup UI display language

Select router (SSID) for connection

Manually enter the SSID if not on list

Select

router's

security type

Device Mac address

Select the sensor located hemisphere

(e.g. US and EU countries are "N"

Australia is "S")

Press to complete the WI-FI related

setting

Enter station ID and

key assigned by the

ProWeatherLive (PWL)

Router password (leave blank if the

security type is "Open")

version

Press to allow add

router manually

PWL2345678

112233

NOTE:

- If you don't have station ID and station key available for the upload, you need to rst create an account at

ProWeatherLive (PWL), followed by registering the product to obtain the ID and key. For details, please

refer to "Create PWL account and add new device in PWL" in section 5.

- When WI-FI setup is completed, your PC/Mac or smart phone will resume its default WI-FI connection.

- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop AP mode and

the console will restore your previous setting.

- Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.

6.3 SETUP THE WEATHER SERVER CONNECTION

Enter the information into the following web interface "SETUP" page. Ensure all information is

entered prior to pressing

Apply

to connect the console to ProWeatherLive.

WiFi Router setup

ADVANCED

ProWeatherLive

Station ID:

Weather server setup

Station key:

Router:

Add Router

Security type:

Router Password:

WAP2

ROUTER_A

Language: English

Mac address

00:0E:C6:00:07:10

Point to :

Outdoor sensor direction

SETUP

SETTINGS

Apply

Firmware version: 1.00

SETUP page

Press to search router

Press "ADVANCED" icon to

advanced page

Select setup UI display language

Select router (SSID) for connection

Manually enter the SSID if not on list

Select

router's

security type

Device Mac address

Select the sensor located hemisphere

(e.g. US and EU countries are "N"

Australia is "S")

Press to complete the WI-FI related

setting

Enter station ID and

key assigned by the

ProWeatherLive (PWL)

Router password (leave blank if the

security type is "Open")

version

Press to allow add

router manually

PWL2345678

112233

NOTE:

- If you don't have station ID and station key available for the upload, you need to rst create an account at

ProWeatherLive (PWL), followed by registering the product to obtain the ID and key. For details, please

refer to "Create PWL account and add new device in PWL" in section 5.

- When WI-FI setup is completed, your PC/Mac or smart phone will resume its default WI-FI connection.

- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop AP mode and

the console will restore your previous setting.

- Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.

Press the “ADVANCED” button at the top of web interface to enter the advance setting page, this page allows you to

set and view the calibration data of the console, as well as update the rmware version on PC/Mac web browser.

ADVANCE SETTING IN WEB INTERFACE

6.4 ADVANCE SETTING IN WEB INTERFACE

Press "ADVANCED" key at the top of web interface to enter the advance setting page, this page

allow you to set and view the calibration data of the console, as well as update the rmware

version on PC/Mac web browser.

SETUP ADVANCED

Upload

Browse

Firmware version: 1.00

-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmHg

Setting Range:

Temperature

Outdoor

Indoor

CH 1

CH 2

CH 3

CH 4

CH 5

CH 6

CH 7

Humidity %

Relative Pressure Offset:

Absolute Pressure Offset:

hpa

Range: -20 ~ 20%

(Default: 0.0)

Current offset: 0Current offset: 0

Current offset: 0

(Default: 0)

Current offset: 0

(Default: 0)

Current offset: 0

Current offset: 0Current offset: 0

Pressure

Range: -20.0 ~ 20.0

-36.0 ~ +36.0

F (Default: 0.0)

*UV gain:

Range: 0.01 ~ 10(Default: 1.00)

Current gain: 1.00

*Light gain:

Range: 0.01 ~ 10(Default: 1.00)

Current gain: 1.00

*PM2.5:

Range: -99 ~ 99(Default: 0)

Current offset: 0

*PM10:

Range: -99 ~ 99(Default: 0)

Current offset: 0

* Depends on the model

*Wind speed gain:

*Wind direction:

*Rain gain:

Range: 0.5 ~ 1.5(Default: 1.00)

Range: -90 ~ 90(Default: 0

)

Range: 0.5 ~ 1.5(Default: 1.00)

Current gain: 1.00

Current offset: +0

Current gain: 1.00

SETTINGS

Current rmware version

Press "SETUP" icon to

setup page

Select setting unit

In/Outdoor & CH 1~7

temperature calibration

section

Pressure calibration

section

The rain, wind speed, UV

and light calibration use gain

method. The wind direction

is +/- 90 o󰀨set

The PM2.5 and PM10 is

+/-99 o󰀨set

(PM2.5 /10 calibration

setting is for optional

sensor only)

The rmware update

function only available

in PC/Mac web browser

In/Outdoor & CH 1~7

humidity calibration

section

Select setting unit

Current o󰀨set value

is the value that you

set before to o󰀨set the

pressure reading

ADVANCED page