Instructions / Assembly

18
19
The indoor reading is the default mode of this console. This mode shows comfort indication and temperature/
humidity readings.
A solid arrow indicates the current real-time wind direction, whereas the bars indicate up to six (6) dierent
wind direction of the past ve (5) minutes.
Users can add up to seven (7) additional hygro-thermo sensors to display console. Press the CHANNEL
button to switch between indoor and channels 1 to 7.
For auto-scroll function, just press and hold the CHANNEL button for three (3) seconds and the icon
will appear next to CH. The console will scroll the readings of all the sensors every three (3) seconds.
This mode shows channel number, comfort indication, temperature, humidity, signal strength, and sensor
type (pool or soil moisture) of current sensor.
Press the WIND button to switch between the average wind speed measurement, gust wind speed
measurement, and BFT measurement.
• AVERAGE: The AVERAGE wind speed will display the average of all wind speed numbers recorded in the
previous 12 seconds.
• GUST: The GUST wind speed will display the highest wind speed recorded from the last reading.
• BFT: The Beaufort scale of current wind speed will be displayed.
User can change to wind direction be shown in 360 degrees.
Press and hold WIND button for two (2) seconds until the wind direction is ashing. Press DOWN/INDEX
or UP/FORECAST button to select the display format between 16-point direction and 360 degrees.
Users can add up to seven (7) additional water leak sensors to display console.
The channel number(s) of the corresponding water leak sensor(s) added to the console will be shown with
the “NO LEAKING” icon.
When water leaking is detected, the channel number of the sensor detecting the leak and the “LEAKING”
icon will ash together.
NOTE: When low battery is detected, the channel number of the sensor detecting the low battery
condition will ash once every four (4) seconds.
INDOOR TEMPERATURE & HUMIDITY
MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS
Wind Speed, Gust, and Beaufort Scale Display
Wind Direction in 16-point directions and 360 Degrees
WATER LEAK SENSORS (OPTIONAL)
The wind speed level chart on display provides a quick reference on the current wind condition.
Real time wind
direction indicator
Wind direction
Wind speed level
indicator
Past wind directions
indicator of last 5 minutes
(maximum 6)
Average / gust
wind speed or
Beaufort scale
WIND
Wind Speed and Direction Overview
18
4.3.5.1 OVERVIEW
1. Low battery indicator for CH sensor
2. Sensor signal strength icon
3. Channel number
4. Auto loop icon
5. Temperature reading section
6. Indoor icon
7. Floating pool sensor icon
8. Water leak sensor status section
9. Soil moisture sensor icon
10. Humidity reading section
4.3.5.2 INDOOR TEMPERATURE & HUMIDITY
The indoor reading is default mode of the console, which
shows the temperature and humidity reading of indoor.
4.3.6 MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS
You can add up to 7 additional Thermo-Hygrometer
sensor (optional, refer to section 3.2). Press the [ CH ]
key to switch between indoor and Channels 1 to 7.
For auto-scroll function, just press and hold the [ CH ]
key for 3 seconds and the
icon will appear next to CH.
The console will scroll the readings of all the sensors
every 3 seconds.
This mode shown below information:
- Channel number of the current sensor
- Temperature and humidity reading of this sensor
- Signal strength of this sensor.
- Sensor type icon (for water pool or soil moisture sensor)
4.3.7 WATER LEAK (OPTIONAL LEAK SENSOR)
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
detecting the leaking will ash together the LEAKING icon.
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
condition will ash once every 4 seconds.
18
4.3.5.1 OVERVIEW
1. Low battery indicator for CH sensor
2. Sensor signal strength icon
3. Channel number
4. Auto loop icon
5. Temperature reading section
6. Indoor icon
7. Floating pool sensor icon
8. Water leak sensor status section
9. Soil moisture sensor icon
10. Humidity reading section
4.3.5.2 INDOOR TEMPERATURE & HUMIDITY
The indoor reading is default mode of the console, which
shows the temperature and humidity reading of indoor.
4.3.6 MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS
You can add up to 7 additional Thermo-Hygrometer
sensor (optional, refer to section 3.2). Press the [ CH ]
key to switch between indoor and Channels 1 to 7.
For auto-scroll function, just press and hold the [ CH ]
key for 3 seconds and the
icon will appear next to CH.
The console will scroll the readings of all the sensors
every 3 seconds.
This mode shown below information:
- Channel number of the current sensor
- Temperature and humidity reading of this sensor
- Signal strength of this sensor.
- Sensor type icon (for water pool or soil moisture sensor)
4.3.7 WATER LEAK (OPTIONAL LEAK SENSOR)
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
detecting the leaking will ash together the LEAKING icon.
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
condition will ash once every 4 seconds.
18
4.3.5.1 OVERVIEW
1. Low battery indicator for CH sensor
2. Sensor signal strength icon
3. Channel number
4. Auto loop icon
5. Temperature reading section
6. Indoor icon
7. Floating pool sensor icon
8. Water leak sensor status section
9. Soil moisture sensor icon
10. Humidity reading section
4.3.5.2 INDOOR TEMPERATURE & HUMIDITY
The indoor reading is default mode of the console, which
shows the temperature and humidity reading of indoor.
4.3.6 MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS
You can add up to 7 additional Thermo-Hygrometer
sensor (optional, refer to section 3.2). Press the [ CH ]
key to switch between indoor and Channels 1 to 7.
For auto-scroll function, just press and hold the [ CH ]
key for 3 seconds and the
icon will appear next to CH.
The console will scroll the readings of all the sensors
every 3 seconds.
This mode shown below information:
- Channel number of the current sensor
- Temperature and humidity reading of this sensor
- Signal strength of this sensor.
- Sensor type icon (for water pool or soil moisture sensor)
4.3.7 WATER LEAK (OPTIONAL LEAK SENSOR)
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
detecting the leaking will ash together the LEAKING icon.
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
condition will ash once every 4 seconds.
18
4.3.5.1 OVERVIEW
1. Low battery indicator for CH sensor
2. Sensor signal strength icon
3. Channel number
4. Auto loop icon
5. Temperature reading section
6. Indoor icon
7. Floating pool sensor icon
8. Water leak sensor status section
9. Soil moisture sensor icon
10. Humidity reading section
4.3.5.2 INDOOR TEMPERATURE & HUMIDITY
The indoor reading is default mode of the console, which
shows the temperature and humidity reading of indoor.
4.3.6 MULTI-CHANNEL AND SCROLL MODE FOR OPTIONAL SENSORS
You can add up to 7 additional Thermo-Hygrometer
sensor (optional, refer to section 3.2). Press the [ CH ]
key to switch between indoor and Channels 1 to 7.
For auto-scroll function, just press and hold the [ CH ]
key for 3 seconds and the
icon will appear next to CH.
The console will scroll the readings of all the sensors
every 3 seconds.
This mode shown below information:
- Channel number of the current sensor
- Temperature and humidity reading of this sensor
- Signal strength of this sensor.
- Sensor type icon (for water pool or soil moisture sensor)
4.3.7 WATER LEAK (OPTIONAL LEAK SENSOR)
You can add up to 7 additional Water Leak sensors (optional, refer
to section 3.2)
The channel number(s) of the corresponding water leak sensor(s)
added to the console will be shown with the NO LEAKING icon.
When water leaking is detected, the channel number of the sensor
detecting the leaking will ash together the LEAKING icon.
NOTE:
When low battery is detected, the channel number of the sensor detecting the low battery
condition will ash once every 4 seconds.
19
4.3.8 WIND
4.3.8.1 WIND SPEED AND DIRECTION SECTION OVERVIEW
Past wind directions
indicator of last 5
minutes (maximum 6)
Average / Gust
Wind speed or
Beaufort scale
Real time wind
direction indicator
Wind direction
Wind speed
level indicator
A solid arrow indicates the current real-time wind direction, whereas the bars indicate up to six
different wind direction of the past 5 minutes.
4.3.8.2 WIND SPEED, GUST AND BEAUFORT SCALE DISPLAY
Press [WIND] key to switch display between Average wind speed, Gust, and Beaufort scale.
The wind level provides a quick reference on the wind condition and is indicated by a series of
text icons
Level LIGHT MODERATE STRONG STORM
Speed
2-8 mph
3-13 km/h
9-25 mph
14-41 km/h
26-54 mph
42-87 km/h
≥ 55 mph
≥ 88 km/h
NOTE:
- Wind speed is dened as the average wind speed in the 12 second update period
- Gust is dened as the peak wind speed in the 12 second update period
4.3.8.3 WIND DIRECTION IN 16-POINT DIRECTIONS AND DEGREES
By default, wind direction is displayed by a 16-point compass, which include N, E, S, W, NE,
NW, SE, SW, NNE, ENE, SSE, ESE, NNW, WNW, SSW, WSW.
User can change to wind direction shown in 360 degrees.
Press and hold [ WIND ] key for 2 seconds until the wind direction is ashing. Press [ /
FORECAST ] or [ / INDEX ] key to select the display format between 16-point direction and
360 degrees.
19
4.3.8 WIND
4.3.8.1 WIND SPEED AND DIRECTION SECTION OVERVIEW
Past wind directions
indicator of last 5
minutes (maximum 6)
Average / Gust
Wind speed or
Beaufort scale
Real time wind
direction indicator
Wind direction
Wind speed
level indicator
A solid arrow indicates the current real-time wind direction, whereas the bars indicate up to six
different wind direction of the past 5 minutes.
4.3.8.2 WIND SPEED, GUST AND BEAUFORT SCALE DISPLAY
Press [WIND] key to switch display between Average wind speed, Gust, and Beaufort scale.
The wind level provides a quick reference on the wind condition and is indicated by a series of
text icons
Level LIGHT MODERATE STRONG STORM
Speed
2-8 mph
3-13 km/h
9-25 mph
14-41 km/h
26-54 mph
42-87 km/h
≥ 55 mph
≥ 88 km/h
NOTE:
- Wind speed is dened as the average wind speed in the 12 second update period
- Gust is dened as the peak wind speed in the 12 second update period
4.3.8.3 WIND DIRECTION IN 16-POINT DIRECTIONS AND DEGREES
By default, wind direction is displayed by a 16-point compass, which include N, E, S, W, NE,
NW, SE, SW, NNE, ENE, SSE, ESE, NNW, WNW, SSW, WSW.
User can change to wind direction shown in 360 degrees.
Press and hold [ WIND ] key for 2 seconds until the wind direction is ashing. Press [ /
FORECAST ] or [ / INDEX ] key to select the display format between 16-point direction and
360 degrees.
Level Light Moderate Strong Storm
Speed
W
Real time wind
direction indicator
Wind direction
ind speed level
indicator
Past wind directions
indicator of last 5
minutes (maximum 6)
2-8 mph
3-13 km/h
9-25 mph
14-41 km/h
25–54 mph
42–57 km/h
≥ 55 mph
≥ 88 km/h