Installation Guide

ManualsBrandsLogia ManualsGarden Center5-in-1 Indoor/Outdoor Wi-Fi Weather Station with Remote Monitoring System

Follow the steps below to update your device’s Function or Wi-Fi

System Firmware

1. Download the latest version of the rmware (function or Wi-Fi

) and save it to your PC.

Remember where you saved the le.

2. Press and hold the SENSOR/WI-FI button for six (6) seconds to put the display console into AP

mode, then connect the PC to the console (refer to steps in Set Up Wi-Fi Connection on page 18.

3. Click the button that says Browse next to the appropriate type of update that you downloaded

and navigate to the location where you saved the le.

4. Click the corresponding Upload button to transfer the update le to the console.

5. The le will install automatically once it is uploaded. You can view update progress on the

display console in the wind direction section (the number displayed will correspond to the

percentage completed, so 50 = 50% and so on).

You can also use the Apple ipad's "WunderStation" app to login your own weather station to

view the live data.

WunderStation

VIEWING YOUR WEATHER DATA IN WEATHERCLOUD

1. To view your weather station live data in a web browser (PC or mobile version), please visit

https://weathercloud.net and sign in your own account.

2. Click the

icon inside the pull down menu of your station.

3. Click "Current", "Wind", "Evolution" or "Inside" icon to view the live data of your weather

station.

FIRMWARE UPDATE

The console supports OTA rmware update capability. Its rmware may be updated over the

air anytime (whenever necessary) through any web-browser on a PC with WI-FI connectivity.

Update function, however, is not available through mobile/smart devices.

Two types of rmware updates are available, namely Function Firmware and System WI-FI

Firmware, and are located at the bottom of ADVANCED page.

Current Function

firmware version

Current WI-FI

firmware version

Current Function

rmware version

Current Wi-Fi

rmware version

FIRMWARE UPDATE STEP

1. Download the latest version rmware (function or WI-FI) to your PC.

2. Set the Console into AP (access point) mode then connect the PC to the console (ref to

"SETUP WI-FI CONNECTION" section in previous page).

3. To update the Function rmware, click the

Browse

in Function rmware section and

browse to the location of the le you download in step 1. To update the WI-FI rmware, click

the

Browse

in WI-FI rmware section.

4. Click the corresponding

Upload

to start

transfer the rmware le to console (indicated by

a transfer completion %).

Upload

30% ...

BrowseC:\download\PWS_SYS.bin

Upload

Browse

Function firmware version: 1.00

WiFi firmware version: 1.00

5. Once the console received the rmware le, it

executes the update automatically as indicated

by the update progress on display (i.e. 100 is

completion).

6. The console will restart once the update completed.

NOTE:

- Function and WI-FI rmware cannot be updated at the same time, you need to update one by

one.

- Please keep connecting the power during the rmware update process.

- Please make sure your PC's WI-FI connection is stable.

- When the update process start, do not operate the PC and console.

- During rmware update the console will stop upload data. It will reconnect to your WI-FI router

and upload the data again once the update success. If the console cannot connect to your

router, please end the SETUP page to setup again.

- After the rmware updates, user might need to input the Weather Underground ID and

password again.

OTHER SETTING & FUNCTIONS OF THE CONSOLE

CLOCK SETTING

This console is designed to obtain the local time by synchronize with the assigned internet time

server. If you want to use it ofine, you can set the time and date manually. During the rst time

startup, press and hold the [ WI-FI / SENSOR ] key for 6 seconds and let the console back to

normal mode.

1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.

2. The setting sequence: Time Zone → DST ON/OFF → Hour → Minute → 12/24 hour format →

Year → Month → Day → M-D/D-M format → Time sync ON/OFF → weekday Language.

3. Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.

4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically

exit the setting mode 60 seconds later without pressing any key.

NOTE:

- In normal mode, press [ CLOCK SET ] key to switch between year and date display.

- During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal

model.

FIRMWARE UPDATE STEP

1. Download the latest version rmware (function or WI-FI) to your PC.

2. Set the Console into AP (access point) mode then connect the PC to the console (ref to

"SETUP WI-FI CONNECTION" section in previous page).

3. To update the Function rmware, click the

Browse

in Function rmware section and

browse to the location of the le you download in step 1. To update the WI-FI rmware, click

the

Browse

in WI-FI rmware section.

4. Click the corresponding

Upload

to start

transfer the rmware le to console (indicated by

a transfer completion %).

Upload

30% ...

BrowseC:\download\PWS_SYS.bin

Upload

Browse

Function firmware version: 1.00

WiFi firmware version: 1.00

5. Once the console received the rmware le, it

executes the update automatically as indicated

by the update progress on display (i.e. 100 is

completion).

6. The console will restart once the update completed.

NOTE:

- Function and WI-FI rmware cannot be updated at the same time, you need to update one by

one.

- Please keep connecting the power during the rmware update process.

- Please make sure your PC's WI-FI connection is stable.

- When the update process start, do not operate the PC and console.

- During rmware update the console will stop upload data. It will reconnect to your WI-FI router

and upload the data again once the update success. If the console cannot connect to your

router, please end the SETUP page to setup again.

- After the rmware updates, user might need to input the Weather Underground ID and

password again.

OTHER SETTING & FUNCTIONS OF THE CONSOLE

CLOCK SETTING

This console is designed to obtain the local time by synchronize with the assigned internet time

server. If you want to use it ofine, you can set the time and date manually. During the rst time

startup, press and hold the [ WI-FI / SENSOR ] key for 6 seconds and let the console back to

normal mode.

1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.

2. The setting sequence: Time Zone → DST ON/OFF → Hour → Minute → 12/24 hour format →

Year → Month → Day → M-D/D-M format → Time sync ON/OFF → weekday Language.

3. Press [ ] or [ ] key to change the value. Press and hold the key for quick-adjust.

4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically

exit the setting mode 60 seconds later without pressing any key.

NOTE:

- In normal mode, press [ CLOCK SET ] key to switch between year and date display.

- During the setting, you can press and hold [ CLOCK SET ] key for 2 seconds to back to normal

model.