Warranty

ManualsBrandsLogia ManualsGarden Center5-in-1 Indoor/Outdoor Weather Station Remote Monitoring System with PC Connect

The display console automatically stores the weather data from the past 24 hours.

1. Press the HISTORY/ button to check the beginning of the current hour’s weather data, e.g., if

the current time is 7:25 AM on Dec 1st, the display will show the data for 7:00 AM on Dec 1st.

2. Press the HISTORY/ button to view the older readings for each hour of the past 24 hours, e.g.

6:00 AM (Dec 1st), 5:00 AM (Dec 1st), …, 10:00 AM (Nov 30th), 9:00 AM (Nov 30th), 8:00 AM (Nov 30th).

3. Press the GRAPH/ or HISTORY/ buttons to adjust the value, or press and hold the buttons to

adjust the value more quickly.

4. Press the ALERT button when the desired value is reached to save the alert setting, then press the

ALARM button to toggle the weather alert on or o.

2. While on the alert option you want to set, press and hold the ALERT button for two (2) seconds to

enter that alert’s settings mode. The alert option will start ashing.

5. Press any button on the front of the display console to save and return to normal mode, or wait 30

seconds without pressing any buttons and the alert will save itself and return to normal mode.

WEATHER ALERT SETTINGS

POINTING THE WIRELESS WEATHER SENSOR TO SOUTH

To Set the Alert

To Silence the Weather Alert Alarm

ALERT ON

ALERT OFF

History Data for Past 24 Hours

The Weather Alert can alert you to certain weather conditions by activating an alarm sound and

ashing the LCD display’s alert icon when specic criteria are met.

1. Press the ALERT button to cycle through and display the desired weather alert options in the

following order:

Press the SNOOZE/LIGHT button on top of the display console to silence the alarm, or it will

automatically turn o after two (2) minutes.

The outdoor wireless weather sensor is calibrated to be pointed North for maximum accuracy.

However, for your convenience, if you are a user located in the Southern Hemisphere, you can use the

sensor with the wind vane pointing South.

1. Mount and install the wireless weather sensor with the wind meter end pointed South, instead of

North. (Please refer to the Installation Instructions on page 12 for mounting instructions.)

2. While the display console is in normal operating mode, press and hold the INDEX button for eight

(8) seconds until the N icon appears in the weekday section of the display to indicate the console is

in sensor orientation mode.

3. Use the GRAPH/ or HISTORY/ buttons to change the orientation to Southern Hemisphere.

The N should change to an S.

4. Press the INDEX button another time to conrm and exit the menu.

NOTES:

• Changing the hemisphere setting will automatically switch the direction of the moon phases on the

display.

• Pointing the wireless weather sensor toward the South will allow maximum sunlight on the solar

panel, especially during the winter season in the Southern Hemisphere.

NOTE: The LCD display will also show the time and date when displaying the history data records.

NOTES:

• Once the alert is triggered, the alarm will sound for two (2) minutes and the associated alert icon

and weather readings will ash.

• If the alert alarm automatically shuts o after two (2) minutes instead of being manually shut o,

the associated alert icon and readings will continue ashing until the reading is out of the alert range.

• The weather alert alarm will go o once the readings fall into alert range again.

Alert Option Sequence Setting Range Display Section Default Setting

High Outdoor Humidity Alert

Low Outdoor Humidity Alert

High Indoor Temperature Alert

Low Indoor Temperature Alert

High Indoor Humidity Alert

Low Indoor Humidity Alert

Wind Speed Alert

-40°F ~ 176°F

(-40°C ~ 80°C)

0.1 m/s ~ 50 m/s

(0.1 ~ 180 km/h

0.1 ~ 112 mph

0.1 ~ 97 knots)

17.2 m/s

(62 km/h

39 mph

34 knots)

1% ~ 99%

-40°F ~ 176°F

(-40°C ~ 80°C)

1% ~ 99%

Outdoor temperature &

humidity

Indoor temperature &

humidity

Wind direction & speed

104°F (40°C)

32°F (0°C)

80%

40%

104°F (40°C)

32°F (0°C)

80%

40%

Pressure Drop Alert 1hPa ~ 10hPa

Barometer & Rainfall

3hPa

Hourly Rainfall Alert 0.04 in ~ 39 in

(1 mm ~ 1000 mm)

-40°F ~ 140°F

(-40°C ~ 60°C)

4 in (100 mm)

Low Wind Chill Alert

Weather index

32°F (0°C)

High Dew Point Alert

50°F (10°C)

Low Dew Point Alert

14°F (-10°C)

High Heat Index Alert

81°F ~ 120°F

(27°C ~ 49°C)

95°F (35°C)

High Beaufort Scale Alert 1 ~12 6

High Outdoor Temperature Alert

(current channel)

Low Outdoor Temperature Alert

(current channel)

Pressure Drop 1hPa ~ 10hPa

Barometer & Rainfall

3hPa

Hourly Rainfall 1mm ~ 1000mm 100mm

Wind Chill Low Alert -40°C ~ 60°C

Weather index

0°C

Dew point High Alert

-40°C ~ 60°C

10°C

Dew point Low Alert -10°C

Heat index High Alert 27°C ~ 49°C 35°C

Beaufort scale High Alert 1 ~12 6

2. Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert

setting and the alert reading will ash.

3. Press [ GRAPH / ] or [ HISTORY / V ] key to adjust the value or press and hold the key to

change rapidly.

4. Press [ ALERT ] key to save the alert reading then press [ ALARM ] key to toggle the

regarding alert on / off.

Alert

Alert on Alert off

5. Press any key on the front side to save and back to normal mode, or it will automatically

back to normal mode after 30 seconds without pressing any key.

To silence the alert alarm:

Press [ SNOOZE / LIGHT ] key to silence the alert alarm or let the alarm automatically turn off

after 2 minutes.

NOTE:

- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and

readings will ash.

- If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep

ash until the weather reading is out of the alert range.

- The weather alert will sound again when the weather readings falls into the alert range again.

POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH

The outdoor 5-in-1 sensor is calibrated to point to North for the maximum accuracy. However,

for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the

sensor with the wind vane pointing to South.

1. Install the 5-in-1 wireless sensor with its wind meter end pointing to South. (Please refer to

INSTALLATION OF THE WIRELESS SENSOR for mounting details)

2. In normal mode of the console, press and hold [ INDEX ] key for 8 seconds until the “N”

icon appears on the weekday location to enter into the sensor orientation mode

3. Use [ GRAPH / ] or [ HISTORY / V ] key to change to lower part (Southern Hemisphere).

4. Press [ INDEX ] key to conrm and exit.

NOTE:

- Changing the hemisphere setting will automatically switch the direction of the moon phase on

the display.

- Pointing to South allows maximum sunlight on the solar panel, especially during winter

season in Southern Hemisphere

Pressure Drop 1hPa ~ 10hPa

Barometer & Rainfall

3hPa

Hourly Rainfall 1mm ~ 1000mm 100mm

Wind Chill Low Alert -40°C ~ 60°C

Weather index

0°C

Dew point High Alert

-40°C ~ 60°C

10°C

Dew point Low Alert -10°C

Heat index High Alert 27°C ~ 49°C 35°C

Beaufort scale High Alert 1 ~12 6

2. Under the current alert reading, press and hold [ ALERT ] key for 2 seconds to enter alert

setting and the alert reading will ash.

3. Press [ GRAPH / ] or [ HISTORY / V ] key to adjust the value or press and hold the key to

change rapidly.

4. Press [ ALERT ] key to save the alert reading then press [ ALARM ] key to toggle the

regarding alert on / off.

Alert

Alert on Alert off

5. Press any key on the front side to save and back to normal mode, or it will automatically

back to normal mode after 30 seconds without pressing any key.

To silence the alert alarm:

Press [ SNOOZE / LIGHT ] key to silence the alert alarm or let the alarm automatically turn off

after 2 minutes.

NOTE:

- Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and

readings will ash.

- If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep

ash until the weather reading is out of the alert range.

- The weather alert will sound again when the weather readings falls into the alert range again.

POINTING THE WIRELESS 5-IN-1 SENSOR TO SOUTH

The outdoor 5-in-1 sensor is calibrated to point to North for the maximum accuracy. However,

for the user's convenience (e.g. users in the Southern hemisphere), it is possible to use the

sensor with the wind vane pointing to South.

1. Install the 5-in-1 wireless sensor with its wind meter end pointing to South. (Please refer to

INSTALLATION OF THE WIRELESS SENSOR for mounting details)

2. In normal mode of the console, press and hold [ INDEX ] key for 8 seconds until the “N”

icon appears on the weekday location to enter into the sensor orientation mode

3. Use [ GRAPH / ] or [ HISTORY / V ] key to change to lower part (Southern Hemisphere).

4. Press [ INDEX ] key to conrm and exit.

NOTE:

- Changing the hemisphere setting will automatically switch the direction of the moon phase on

the display.

- Pointing to South allows maximum sunlight on the solar panel, especially during winter

season in Southern Hemisphere