Operation Manual

Iris Rev. 08 – 2009

English

Alarms & Functi

U p A l a rm 3 . 0

A u to D o w n Of f

L o a d D e f a u l t N o

E x i t

Select the row “Auto Down” and set the value at which the anchor must stop. Then press the

(ON)

and (DOWN) keys for at least three seconds. Once anchor casting has commenced, release the keys.

For safety reasons it is however possible to interrupt automatic descent by pressing any

instrument key.

Troubleshooting

FAULT CAUSE CORRECTIVE ACTION

Though UP or DOWN keys

are pressed, the instrument

doesn't receive any signal

from the magnetic sensor

for more than 5 seconds.

Check the sensor electric

connections.

Check if sensor operates

properly. If not, replace it.

Check the position of

sensor and magnet on

gipsy and their distance (3

mm).

Check the operation of

electric installation or

anchor windlass.

The instrument’s power

supply voltage is lower than

10V.

Verify the battery charge or

operation of the electrics

system.

Warranty

We guarantee our products from manufacturing defects

for 2 years from the purchase date

(purchase ticket or any other purchase proof will be requested). Guarantee does not include

damages and breakage during the transport, damages and breakage due to faulty installation or

improper use. Warranty is no longer valid when repairs or servicing have been made by

unauthorized people or made with spare parts which are not original. Warranty does not include

the complete replacement of the goods and refers exclusively to the replace of faulty pieces and

necessary labour. It does not include transfer or transport expenses. The Customer will not ask for

expenses refund.