Operating Manual Peripherals 3 3 1 4 7 0 2 1 233–33147.
Brief instructions for ViewVision DR+DVB-T Preparation Recorder/TV operation Remote control TV mode Channel overview Remote control recorder mode or P+/- Select channel Switch unit on/off Insert disk 3456 Button on the unit – Insert disk – Operating modes Programme magazine Picture-in-picture during playback MOVIE – 34MOVIE – 56HDD/DISC/USB – MUSIC – 34MUSIC – 56HDD/DISC/USB – Insert disk PHOTO – 34PHOTO – 56HDD/DISC/USB – Select recording medium Recording – Insert recordable disk – HDD
Remote control Assist – recorder operation Loewe TV: Sound off/on LED indicator for current operating mode Switch over to operate TV set (Page 20)........................ Switch over to operate Recorder Timer recording menu; timer recording list menu (Page 49) . ...............................................Timeshift Mode Switch on/off - on stand by................................
Index A Area Code 31 AUDIO OUT 7 Auto Chapter 32 Automatic programming 24 B Basic Settings 20 Brief instructions 2 C Card-Reader 47 Chapter List 54 Clock set 27 COMPONENT VIDEO OUT 7 Connections Accessories 19 Aerial 16 Amplifier 19 Camcorder 20 Decoder 18 General 16 Satellite Receiver 18 Set-top box 18 Television 16 Copy/move files/folders 44 Copy protection system 14 Copyright 14 CPRM 14 D Delete Station 26 Digital Link 11,20 Digital Link Plus 11,24 DIGITAL OUT 7 Digital Video 52,53 Disc-related Terms 15 D
Contents Brief instructions for ViewVision DR+DVB-T.................... 2 Remote control Assist – recorder operation..................... 3 Index................................................................................. 4 Front Panel....................................................................... 6 Rear Panel & Display........................................................ 7 Operating additional devices............................................8 Setting the remote control...................
Front Panel Operating indicator Front flap (closed) Disc tray Power button Switch off in standby Playback / Pause open/close Stop Next/previous RES (screen chapter resolution) Start recording V I D E O Disc tray - USB DV IN AV3 Video IN AUDIO IN L/R Display D I G I T A L Front flap (open) Recording media
Rear Panel & Display DIGITAL AUDIO COMPONENT VIDEO Digital, coaxial OUT (Y Pb Pr) Aerial connection Connection for a TV audio output with component inputs (Cinch) IN (from ANT.) AV 2 DECODER Euro AV2 (SCART) connection for an external source (Decoder, Set-TopBox, Video Recorder etc.). S-VIDEO OUT AUDIO (L/R) Connection for a Connection for a TV with TV with S-Video audio inputs (Cinch) input.
Operating additional devices Setting the remote control Operating Loewe equipment The different Loewe sets can be set as follows on the Assist remote control: Device Using the remote control for a DVD player Button combination Loewe TV (Q2500 – L2650) + Loewe TV (Q2300 – Q2400) + Loewe Centros 11x2 + Loewe Viewvision, Centros 21x2 + Loewe ViewVision DR+ DVB-T + Loewe ViewVision 8106 H + Loewe Auro 2216 PS/8116 DT + Loewe Xemix 6222 PS + Press the DVD button, the indicator above
Remote control Assist – TV-operation Sound off/on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Call timer list Set picture format Switch on/off - on stand by Radio Digital on/off Switch over to operate Auro Sound menu on/off Select station directly MENU: enter numbers or letters Call AV selection Teletext on/off Show/hide menu PIP on/off (picture in picture) Menu “ASSIST+“ on/off Open index; MENU: info texts on/off Status display on/off; MENU:
Welcome Thank you for choosing a Loewe product. We are happy to welcome you as our customer. At Loewe we combine the highest standards of technology, design and user friendliness. This is equally true of TV, DVD, video, audio and accessories. Neither technology nor design is an end in itself, but both are intended to provide our customers with the best possible audio and visual experience. Our design is not influenced by short-term, fashionable trends.
Welcome Shipping the Unit Advantages of connection to a Loewe TV set The original shipping box and packaging materials should be used to ship the unit. To give the unit the best possible protection, repack it as it was originally packed by the manufacturer. With Digital Link you can install the recorder for example in a closed rack or a cupboard without direct visual contact with the recorder. With the DVD remote control, you operate the recorder via the Loewe TV set.
For your safety For your own safety and to avoid unnecessary damage to your unit, please read and follow the safety advice below: Use for the intended purpose and ambient conditions This recorder is intended exclusively for the reception, recording and playing of video and audio signals and is designed for the home and office and may not be operated in rooms with a high humidity (e.g. bathroom, sauna) or high concentration of dust (e.g. workshops).
Essential Information Rewritable discs DVD-RW (Digital Versatile Disc - ReWritable) DVD-RW discs can be formatted for recording in the VR mode or in the video mode. These discs can be rewritten several times. Recordings can be deleted and the disc can then be rewritten. VR mode Recordings can be extensively edited. They can only be played on VR mode compatible players (after finalisation). Video mode Limited editing possible. Play on normal DVD players (after finalisation).
Essential Information Recording TV-Audio Channels This recorder can also record NICAM audio. If the NICAM setting (page 26) is set to “Auto“, NICAM audio will be recorded in the case of a NICAM transmission. Restrictions on Video Recording • You cannot record movie material with copy protection with this recorder. If a copy protection is encountered during recording, the recording stops or is interrupted automatically and a message is displayed on the screen.
Essential Information Regional code of the Recorder and DVDs This Recorder can only play Region “2“ or “all“ coded DVDs. 2 The region code on the label of some DVDs shows which type of DVD recorder can play those discs. If you play other discs the error message “Incorrect region code. Playback not possible.“ will be displayed on the TV screen. Some discs may not have the label with the region code even though they cannot be played in all regions.
Initial Installation Initial Remote Control Setup Connecting to the Aerial Remove the existing aerial cable plug (R) (for analogue, terrestrial or cable TV) from the TV and plug it into the aerial socket on the back of the recorder (IN ( from ANT.)). Then plug one end of the aerial cable provided into the TV socket on the recorder (OUT (To TV)) and the other end into the aerial socket on the TV. Connecting to the Television To insert or change the batteries, press on the imprinted arrow.
R Surr. Initial Installation OFF L R Bass Intensity Front C Min. Max. Phase L Connecting to a Loewe TV System 0 Make the connections as shown here: Audio Link Line IN Right Subw. Left Surr. Front Right Center Left 180 Crossover Frequency 50 250.
Initial Installation Connecting to a set-top box / Satellite Receiver Connecting to an External Decoder Box If you use a cable or satellite receiver with integrated decoder, connect it to your recorder and television set as described below. If you use a separate decoder box for your cable/satellite television, follow the instructions in the next section “Connecting to an External Decoder Box“. 1. Connect the aerial cable as shown. This enables you to watch and record TV channels. .
Initial Installation Connecting to an Amplifier ➠ If the audio format of the digital output does not correspond to the capa- Connecting to an analog amplifier with analog 2-channel stereo or Dolby Pro Logic II / Pro Logic Connect the left and right AUDIO OUT socket of the recorder to the left and right AUDIO IN sockets of the amplifier, receiver or stereo system with the audio cables (A). 5.
Initial Installation Connecting a digital camcorder Concealed installation You can connect a digital camcorder (DV) or a digital DVD-R/RW recorder to the DV IN socket and transfer contents of DV tapes or DVDs digitally. Use a DV cable (not included in delivery) to connect the DV IN-/OUT socket of your DV-camcorder/video deck to the DV IN socket on the front control panel of this recorder.
Initial Installation Auto Setup Manual: Enter the date and time. After you have pressed the On/Off button for the first time or reset the device to the factory settings, the wizard for the automatic setting starts. This sets the language of the menus and dialogs of the recorder, the time and the stations. 3 4 Move cursor. 5 6 Select menu Language. 5 6 Enter data. Confirm with OK . 5 6 Select country. 4Press. Language 5 6 Select Signal Source. 4 Mark Start. Start station search with OK.
Initial Installation Menu overview Main menu TV TV HDD TV DVD Timer Record ShowView MOVIE HDD HDD DivX DISC USB PHOTO HDD DISC USB SPECIAL MUSIC HDD DISC USB Rec Mode Set SETUP Start Setup menu General Auto Programming Country Antennae / DLP Program Edit Add Channel Edit Clock Set Language Display Menu Disc Menu Disc Audio Disc Subtitle DTV Audio DTV Subtitle DivX Subtitle Audio Dolby Digital PCM Bitstream DTS OFF Bitstream MPEG Auto Manual TV Aspect 4:3 Letter Box 4:3 Pan Scan 16:9 Wide AV2
Initial Installation Main menu (HOME) Setup menu All media files can be called from the main menu for playing and recording with the recorder. The menu system offers several ways of changing settings. Most menus consist of three levels for setting up options. If you press only the first and second levels of the menu system are displayed on the screen. You can display the third level by pressing 4.
Initial Installation The General Menu Automatic programming This recorder is equipped with a receiver (tuner) which can receive a maximum 88 analogue and 165 digital channels. ➠ When using Digital Link Plus the analogue station list is adapted to the TV set (on this page). ➠ Connect the recorder to the TV set with Digital Link Plus with a SCART con- ➠ Connect the recorder to the aerial system (page 16). nection (page 16). Call menu.
Initial Installation Add station manually You can add a station manually. Station list menu You can change (rename, move, delete, etc.) a station. ➠ CIf the Lock option (page 30) is set to On, a password is required for the Program Edit option. ➠ Not with Digital Link Plus (DLP). ➠ CIf the Lock option (page 30) is set to On, a password is required for the Call menu. channel setting option. 5 6 Select General symbol. 4 Call second level. 5 6 Select Program Edit. 4 Call third level. Call menu.
Initial Installation Change station You can set an analogue station manually. Moving stations You can sort the order of analogue stations in the Station List menu. ➠ Not with Digital Link Plus (DLP). ➠ Not with Digital Link Plus (DLP). Open the Station list menu (page 25). 5 6 Select PR number. ➠ Not valid when receiving digital TV channels which have a permanent programme assignment number (LCN). Confirm. 5 6 Select Program Edit. 5 6 Select station in the Station List menu. Confirm with OK.
Initial Installation Clock set When the automatic station search has finished, the date and time are set automatically (depending on the transmitting station), also when power is recovered. The Auto option must be set for this. Auto Programming Program Edit Clock Set TV Aspect AV2 Connection Video output format Power Save Mode Antenna Feed 5V Initialization Prev.
Initial Installation Video output format Select the video output format depending on which video interface you are using (page 16): RGB The TV set is connected to the Scart socket AV1. YPbPr The TV set is connected to the COMPONENT VIDEO OUT socket. Power Save Mode You can set the recorder so that it consumes < 1 Watt on standby. In the On position, the decoder signal is switched from AV2 to AV1 and the display switched off.
Initial Installation Audio Menu Lock Menu Each DVD disc offers a variety of audio formats. Set the audio format for the recorder according to the type of audio system you are using. Set Password Dolby Digital / DTS / MPEG PCM Select this option if the unit is connected to a digital two channel stereo amplifier. The DVD recorder‘s digital audio outputs emit sound in PCM 2 channel format if you play a DVD-Video disc with Dolby Digital audio format.
Initial Installation Switching off the password Proceed as follows if you want to switch off the password. Open menu as under “Define password” (page 29). Call menu. 5 6 Select Set Password. DVD Rating This function prevents playing of DVDs unsuitable for children if these contain the appropriate code. Open menu as under “Define password” (page 23). 5 6 Select DVD Rating. Lock System 4 Call third level. DVD Rating 5 6 Select Delete. DTV Rating Confirm with OK. Area Code Set Password DivX Reg.
Initial Installation Area Code Enter the code for a country/region whose standards are to be used to rate the DVDVideo disc. (See “List of country code“ on page 65). For Great Britain select “G B“. Lock System DVD Rating G DTV Rating B DivX registration code You receive the DivX® VOD (Video On Demand) registration identification for hiring and purchasing films through the DivX® VOD-Service. Further information is available under: www.divx.com/vod. Open menu as under “Define password” (page 29).
Initial Installation Recording Menu DV Rec Audio You need to use this setting if your camcorder with 32 KHz / 12-bit is connected to the DV IN socket on the front panel. Some digital camcorders have two stereo tracks for audio. One is used for recording, the other is used for post-editing. Audio 1 The original sound is recorded. Audio 2 The edited sound is used. Rec Mode Set You can set the picture quality for recording: DVD±R/RW (4,7 GB) HQ mode: approx. 1 hour. SQ mode: 2 hours. LQ mode: 4 hours.
Initial Installation Disc Menu Disc Format Select a mode. Disc Format A new disc is initialised by the recorder (on request) when inserted. VR Mode DVD-R DVD-RW DVD+R DVD+RW The recorder initializes the disc in “video mode”. The recorder initializes the disc in “video mode”. The recorder initializes the disc in “video mode”. The recorder initializes the disc in “video mode”.
Initial Installation Finalize Finalization fixes recordings so that the disc can be played on a regular DVD player or a computer with a suitable DVD-ROM drive. During finalization of a Video mode disc a menu is created for disc navigation (Page 64). ➠ Following recording and finalization of DVD-R and DVD+R discs no other editing or recording can take place. This does not however apply for a DVD+RW and DVD-RW disc. Disc Format Disc Label Use this option to enter a name for the disc.
Operating convenience TV mode Selecting a station If you are currently watching a TV channel supplied by the integrated receiver of the recorder (recorder in Stop mode), you can show (and hide) information about the TV station with . Displays the disc format, free memory space and a progress display of the elapsed playing time. Station list There are three different station lists with which you can select stations conveniently. ANALOG TV: List of all analogue TV stations.
Operating convenience EPG program guide Disc playback The EPG program guide contains the programs and times for DVB-T programs. Here you will find all the programs with the program times and a short description of the content quickly and easily. You can display a variety of information about the inserted disc on the screen. Twice to select the Title menu. Displaying the program preview DVD-Video � 4/14 � 1/10 0:12:34 1.STEREO OFF 1/1 NORMAL Switch on program guide.
HDMI mode HDMI (DVI) connection The HDMI connection (High Definiton Multimedia Interface) allows digital picture and sound transmission via a connecting cable, e.g. to Loewe Flat TV sets. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. In the equipment connected, no analogue/digital conversion is necessary, which might also have lead to losses in quality.
Video mode Playing back a DVD or video CD Preparation Switch the television on and set the video source to be the input that the recorder has been connected to or activate the “Control voltage“ option for the television‘s AV input. General functions ➠ Unless otherwise indicated, the remote control (page 3) is able to control the functions described. The recorder‘s own controls can also be used to control certain functions (page 6).
Video mode Freeze frame and picture for picture play-back HDD DVD-ALL VCD DivX Pause: Pause playing. 34 Scroll picture by picture. Continue playing. ➠ The picture by picture scroll back is not supported by VideoCDs and in DivX. You can page forward through images by pressing PAUSE on the remote control. Slow Motion HDD DVD-ALL VCD Pause: Pause playing. Switch on slow motion mode during pause. Select the slow motion direction and speed: � 4/14 � Press twice. 1/10 0:12:34 1.
Video mode Camera positions DVD-V If the DVD contains scenes taken at different camera positions, it is possible to change to another camera position during play-back. Marker Search DVD-Video Select twice during play-back. � 4/14 � 5 6 Select 1/10 Move OK Select MENU Delete END Close Delete Marker 4:3 Press the blue button long to select Marker Search menu. 16 : 9 5 634 Select marked scene. symbol. 0:12:34 3 4 Select the desired camera angle. 1.STEREO current camera position is displayed.
Video mode Subtitles DVD-ALL DivX DVD-Video � 4/14during � Select twice play-back. 1/10 0:12:34 5 6 Select symbol. 1.STEREO OFF 1/1 3 4NORMAL Select the desired subtitle language. PIP (Picture In Picture) HDD DVD-ALL This function enables you to watch TV stations or videos from other connected AV sources whilst playing the video.
DivX mode You can play DivX files saved on the harddisc or disc media with this recorder. Movies can only be saved on USB memory media. ➠ Before playing DivX files, please read the notes “About DivX Video files” on this page. Playing DivX files P- twice briefly to return to the previous title. Finish playing. Show detailed information. Insert the selected disc in the drawer with the side to be played facing down. Exit DivX menu. See page 38 onwards for other operating func tions. Call main menu.
Audio mode Playing titles on Audio CD or MP3/WMA media Audio CDs can be played with the recorder. Recordings in MP3/WMA format can also be played from HDD, memory card, CD-ROM, CD-R or CD-RW discs (read the instructions for MP3/WMA recordings on page 44 before playing MP3/WMA recordings). Change between program and original list. Display detailed information (only MP3/WMA). Finish playing. Options in the music menus Open the disc drawer. 5 6 Select title or folder.
Audio mode Random play 5 6 Select title or folder. OK display menu options. Copy/move files/folders Files and folders can be copied or moved to other data media depending on the medium. 5 6 Select Random. ➠ Switch off the memory card’s write protection if necessary. Confirm with OK. The random play-back starts and the symbol is displayed: . ➠ Check whether the memory medium has enough free capacity. Skip the current title with P+.
Audio mode Program list Options in the menu Program List With the program list you can put together your favorite titles on a memory medium in any order for your individual program. This list may contain 99 titles (Audio CD) or 256 titles (MP3/WMA). Program lists can be saved permanently, renamed, deleted and loaded as often as you like. 5 6 Select title or folder. Mark title or folder. A symbol (✓) appears in front of the title/ folder. Repeated pressing marks other titles/folders.
Photo mode Show photos The recorder can display JPEG files under the following conditions. The maximum size of a JPEG file may not exceed 4 MB. The total number of files and folders is 1999. The file extension must be “.jpg”. The progressive and loss-free compression of JPEG files is not supported. Call main menu. Slide Show 5 6 Select Slide Show option in the Photo List menu. Confirm with OK. The Slide Show menu appears. Slide Show Pictures 34 Select PHOTO. 56 Select HDD / Disc / USB.
USB mode About the system Plugging in the USB memory medium You can play MP3/WMA audio files or show pictures in JPEG format which are stored on a USB stick or a memory card in a USB card reader. You can operate the USB card reader with the remote control of the Loewe recorder. The memory medium must be formatted in FAT 16 or 32 format. Memory cards with other formats cannot be read. ➠ Keep memory media out of reach of children. See a doctor immediately in case of swallowing.
Remote control Assist – USB operation Loewe TV: Sound off/on LED indicator for current operating mode Switch over to operate TV set (page 20)........................ Switch over to operate Recorder * * Switch on/off - on stand by................................(page 20) Loewe TV: Radio Digitall; long: Auro Radio Switch over to operate DVD-Player Loewe TV: Sound menu * * * (pahe 45)....................................................... Program list (page 23).............................................
Recording Recordings on the HDD Clip recording A program can be saved permanently on the HDD during the Timeshift display. Recordings on the internal hard disc (HDD) of the recorder are similar to recording in the VR mode on DVD-RW discs. Ten genres can be assigned to the recordings for easier management (see “Title Name”, page 58). Search for the starting point with single frame, search and slow motion (page 38). Press at the starting point of the clip to be recorded.
Recording Simultaneous record and display Playing another medium during recording Play and record take place independently of each other for DVDs and the integrated HDD. For example, you can record on a DVD or the HDD and at the same time play a movie, photos or music from the respective other memory medium (except Timeshift, DivX). Start recording. Call main menu. 34 Select MOVIE, PHOTO, MUSIC. 56 Select desired memory medium. Confirm selection with OK. Start play-back.
Recording Timer Recording ➠ The recorder must be in standby mode for timer recording to start automatically. This recorder can be programmed to record up to 16 programs within one month. For programmed recordings the timer must be informed which signal sources (TV stations or from AV devices) are to be recorded and the respective start and stop time. ➠ Please note that not every station operates with VPS/PDC. Switch on the recorder. Insert a rewritable disc for DVD recordings.
Recording Timer Record List Record from external sources You can record from an external source ( e.g. SAT-TV set, SAT receiver, camcorder or video recorder). Checking the timer programming Call the Timer Record List menu. The device you want to record from must be connected to the recorder properly. You will find further information on page 16.
Recording Digital Video General “DV“ information With DV (Digital Video, also known as i.LINK), you can use a DV cable as the audio, video, data and control signals input / output to connect a camcorder that has DV to this recorder. The i.LINK interface complies with the IEEE 1394-1995 standard. “i.LINK” and the “i.LINK” logo are trademarks. • This recorder is only compatible with “DV 25“ format camcorders. Digital satellite tuners and digital VHS video recorders are not compatible.
Edit recordings 4 Menu Title List and Chapter List Under the Title List menu, video contents on unfinalised DVDs in VR mode and video contents on the internal HDD can be edited. The available edit functions are dependent on whether video on a DVD in VR mode or on the HDD or whether original contents or playlists are edited. DVD-RW discs in VR-mode can be edited in two ways. Original contents of the disc can be edited directly or a playlist can be created and edited.
Edit recordings Edit Original and Playlist Create new Playlist Title, Chapter and Parts Titles of the original content of the disc contain one or more chapters. When inserting a title in the playlist, all the chapters within this title also appear. That means that chapters in the playlist behave exactly the same as chapters on a DVD-Video disc. Parts are sequences of the original or playlist titles. Parts can be added to or deleted from the Original and Playlist menu.
Edit recordings 1/9 Title List - Original DVD-RW SQ 1Std 25Min Free Play Search > Delete Protect Edit > Playlist Add > Dubbing OK Select DVD-RW Select Playlist TITLE 1 PlaylistTITLE 2 New 21.11. 0:25:30 22.11. 0:33:12 TITLE 3 23.11. 0:45:00 TITLE 4 24.11. 0:12:55 TITLE 6 28.11. 0:08:42 INFO Info TITLE 5 24.11. 0:05:00 TEXT Playlist END SQ 1Std 25Min Free Play Search > Delete Protect Edit > Playlist Add > Dubbing OK Select Close TITLE 1 21.11. 0:25:30 TITLE 2 22.11. 0:33:12 TITLE 3 23.11.
Edit recordings Delete title/chapter from Original/Playlist Delete part When you delete a title or a chapter from the playlist, you only remove the title/ chapter from the playlist. When you delete a title or chapter from the original list, title/chapter are deleted from the disc and the time remaining for recording is prolonged again. Titles or chapters deleted from the original are also deleted from the playlist. HDD -RW VR You can delete a part which you no longer want in the title.
Edit recordings Title Name Select title start point You can assign names to the titles of Original or Playlist. The names may have a maximum 32 characters. A genre can be added to the name (HDD). HDD -RW VR -RW Video +RW +R -R You can select the start point of the title. 5634 Select title to be renamed in the Title List menu. 5634 Select title in the Title List menu. Confirm with OK. The available options are displayed at the left. Confirm with OK. 56 Select Title Name/Rename.
Edit recordings Sorting Combine titles HDD With this function the title list can be sorted by date, title or genre for quicker retrieval of titles. HDD With this function two adjacent original titles on the HDD can be united. 5634 Select title in the Title List menu of the HDD. ➠ This function is not available if only one title is saved on the HDD. ➠ No titles can be combined of there are more than 60 titles on the HDD. Confirm with OK. The available options are displayed at the left. 56 Select Sort.
Edit recordings Divide title Combine chapters HDD +RW With this function you can divide a title into two new titles. HDD -RW VR +RW +R With this function two adjacent playlist or original chapters can be united. 5634 Select title to be divided in the Title List menu. ➠ This function is not available if the title only contains one chapter. The available options are displayed at the left.
Edit recordings Move Playlists Chapters Example: Title List (DVD+RW): -RW VR With this function the play-back order of the chapters within Playlists can be edited. Title List 1/15 DVD+RW SQ 25Min Free ➠ This function is not available if only one chapter is available. 5634 Select chapter in the Chapter List - Playlist menu. Confirm with OK. The available options are displayed at the left. Play Full Play Search Delete Protect Edit Dubbing > TITLE 1 21.11. 0:25:30 Title Name TITLE 3 23.11.
Dubbing Before dubbing With the dubbing function of this recorder you can • create backup copies of important recordings on the HDD on a DVD. • Create a DVD copy of a recording on the HDD for playing on other players. • Copy films recorded on this recorder from DVD to hard disc. • Copy edited movies from the HDD to a DVD. High-Speed dubbing (maximum 12x) Copying DVDs to the harddisc is a completely digital process and therefore takes place with losing picture and sound quality.
Dubbing Dub from HDD to DVD Dub from DVD to HDD Select menu Tile List (HDD). Select menu Tile List – Original (DVD). 5634 Select title. 5634 Select title. Mark title. Confirm with OK. Confirm with OK. The available options are displayed at the bottom left. Title List 1/16 HDD 1/15 DVD-RW SQ 80H 09M Free Play Search Delete Rename Edit Sort Dubbing OK Select Title List - Original > > > TITLE 1 21.11. 0:25:30 TITLE 2 22.11. 0:33:12 TITLE 3 23.11. 0:45:00 TITLE 4 24.11.
Dubbing Overwrite recordings Title List menus on other devices +RW Proceed as follows to overwrite a recorded title with a new video recording: +RW +R The Title List menu can be displayed on DVD players on which DVD+RW or DVD+R discs can be played. ➠ This function is not possible for DVD+R because the recordings are always made at the end of the disc here. Switch the recorder input to the signal source you wish to record from with the number buttons, the P+ / P- buttons or the 0 AV button.
Troubleshooting Problem Possible cause Remedy No function. The mains cable is not plugged in. Fix the mains cable firmly into a socket. No image. The television is not switched to receive signals from the Recorder. Select the right video input mode on the television, so that the image from the Recorder appears on the television screen. The SCART/HDMI cable is not properly connected. Connect the SCART/HDMI cable properly. The television that is connected is switched off. Switch the television on.
Troubleshooting Problem Possible cause Remedy A disc that was recorded to from this Recorder cannot be played on a different DVD player. Some players do not play discs with finalisation in video mode. No solution. The disc was recorded in VR mode. The other player must be RW-compatible. The ability of CD-R / RWs (MP3/WMA, JPEG, (X)VCD, (X)SVCD) and DVD+R / RWs and DVD-R / RWs is influenced by the recording equipment, recording methods and data media.
Technical Specifications General ViewVision DR+ DVB-T ViewVision DR+ DR+ DVB-T Secam Power supply Power consumption Dimensions (approx.) Weight (approx.) Operating temperature Humidity TV system Recording format Outputs Item No. 67502A/D/T00 Item No.
Language Code List Enter the appropriate code when fi rst setting up “Disc Audio“, “Disc Subtitles“ and/or “Disc Menu“. (Further information can be found under “Disc Languages“ on page 28.
List of country codes Key in the corresponding code when first setting the “Area code“ (page 31).
Service Loewe Austria GmbH Parkring 12 1010 Wien, Österreich Tel +43 - 1 22 88 633 - 0 Fax +43 - 1 22 88 633 - 90 Email loewe@loewe.co.at Loewe Opta GmbH, Customer Care Center Industriestraße 11 96317 Kronach, Deutschland Tel +49 1801–22256393 Fax +49 9261–99500 Email ccc@loewe.de ISSAGOGIKI EMBORIKI ELLADOS S.A. 321 Mesogion Av. 152 31 Chalandri-Athens, Hellas Tel +30 - 210 672 12 00 Fax +30 - 210 674 02 04 Email christina@bose-onkyo.gr International Dynamics Australasia Pty Ltd.
Glossary A AV socket: Audio and video signal. AV sources: Audio/video source. AVS: Audio/video front sockets on the TV set (cinch and Mini-DIN). C Cinch cable: Cable for transmitting sound or picture. Component Signal: Video signal which is transmitted by three separate cinch connections. It is made up of the brightness signal “Y” and the colour difference signals “Pb” and “Pr”. YPbPr is the original analogue version of the digital YcbCr in which the video data stored on the DVD are colour coded.
