Quick Start Guide

Reference ID 40-55
Quick guide
english
8
6
Key – :
reducing volume
Direct control on TV set: to the left 
7
Key +:
increasing the volume
Direct control on TV set: to the right 
8
MENU key:
TV set in standby mode: switch TV set on in TV mode
TV set switched on: call direct control on TV set
Direct control on TV set: up 
9
RADIO key:
TV set in standby mode: switching TV set on in radio mode
TV set switched on: switch between TV mode and radio mode
Direct control on TV set: down 
10
Key :
For TV sets without LED backlighting: No function.
For TV sets with LED backlighting: dimming / switching on/off
of the LED backlighting.
Preparing the remote control unit
Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batter-
ies together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you
to change the batteries. Dispose of used batteries in an environmen-
tally friendly way (see chapter Environment / Legal information).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control unit for operating the TV set
Press the TV key.
AAA LR03
AAA LR03

Operating controls on the TV set / Preparing the TV set
Functions of the operating controls
1
Mains switch:
The mains switch is located on the bottom of the set.
Always return the TV set to Standby mode before switching it off
with the main switch.
The TV set will be completely separated from mains only when
you unplug the mains cable.
2
Display:
white: TV set in standby
white, intermittent: TV set starts
green: TV set switched on
red: timer recording active
blue:
TV set in standby and background opera-
tion active (EPG data updating, software
update or DR+ streaming server function)
3
IR receiver:
Infrared receiver for receiving the remote control commands.
4
Infrared transmitter:
When showing 3D content, the 3D glasses Loewe Active
Glasses 3D are controlled via the infrared sensor.
5
On/Off key:
Switching on in standby mode
Switching off to the standby mode
4
1
8 9
10
2
7 6
3
5
– VOL + MENU RADIO
*