Operation Manual

ManualsBrandsLoewe ManualsLCD plasma TVReference lD 55

121

122

123

124

125

126

127

128

129

130

Reference ID 40-55

User guide

129

Connecting a DVD recorder to the TV set

A DVD recorder has been selected in the System settings ט Con-

nections ט AV connecting settings ט Device at connection AV.

Switch off all devices before connecting them.

Connect the Scart output of the DVD player to the TV set’s AV socket

using the Scart adaptor

. Use a fully equipped Scart cable (available

from your dealer) for this.

Plug the adaptor plug into the AV socket of the TV set so that the arrow

on the plug is visible.

If you want to receive and record analogue stations with the receiver

(tuner) built into the recorder, the recorder must be looped into the

aerial cable.

Connect the DVD recorder as shown in the connection example below.

Playback from AV device

Call AV list.

Select AV,

OK switch over.

Start playback on the connected device.

ANT IN

ANT OUT

DVD-Recorder

TV-Gerät

Connection example of a DVD recorder

6 AVS

5 AV

7 PC IN

8 VIDEO8 VIDEO

9 SPDIF

AV list

Note: If you press for

at least two seconds to

switch to the selected

channel, the screen

switches off and you will

only hear the sound.

With the button

(green), you can switch

the screen back on and

off.

Devices on AVS

The AV input AVS offers the possibility of connecting, e.g., a digital

camera, a camcorder or a PC via different adaptors.

The adaptors required in the following are part of an adaptor set. The

adaptor set is available as an accessory from your Loewe dealer (see

chapter Accessories).

The AV inputs AVS and PC IN available in the AV list both refer to

the AVS socket at the side of the TV set. AVS is always to be chosen

in the AV list if the Scart adaptor or the S-video adaptor are used.

Select PC IN in the AV list when you connect a device via the VGA

adaptor.

Connecting Camcorder/camera

Switch off all devices before connecting them.

Connect the video output of the camcorder to the TV set’s AVS

socket using the S-video adaptor

. Use the AV cable enclosed with

the camcorder for this.

Plug the adaptor plug into the AVS socket of the TV set so that the ar-

row on the plug is visible.

Depending on the type of plug, an additional cable is required for the

audio connection.

If your camcorder has an HDMI output, you can also connect the device

to the HDMI sockets HDMI3 or HDMI4 on the side of the TV set.