Operation Manual

Reference ID 40-55
User guide
130
Connecting PC / Set-top box
You can connect a PC and thus use the TV screen as a monitor.
When connecting a PC or auxiliary device to the AVS socket of the
TV set, adjust the output signal on your PC first so that it matches
one of the signals in the table in chapter Technical data, section
Signals via AVS (PC IN) / HDMI.
Switch off all devices before connecting them.
Connect the device to the TV set’s AVS socket with a VGA cable and
the VGA adaptor
(1
. Plug the adaptor plug into the AVS socket of the
TV set so that the arrow on the plug is visible.
Connect the analogue audio signal of the PC to the VGA adaptor via
the jack plug socket.
The adaptor set AV SL2xx includes an adhesive cable holder. Stick it
below the cover of the side connectors. Secure the VGA cable with
it to prevent the VGA adaptor from being pulled out of the jack by
the heavy VGA cable.
For more information, refer to the installation instructions supplied
with the adaptor kit.
Alternatively, connect the digital audio output of the PC or auxiliary equip-
ment to the SPDIF IN socket of the TV set with a cinch cable.
The digital audio input can be assigned to the AVS or PC IN socket in
System settings ט Connections ט Assign digital audio input.
Connection example of a PC
Playback from the device
Call AV list.
Select PC IN,
OK switch over.
Adjusting the geometry of the PC picture
You can set the position (vertical, horizontal) and the phase position of
your PC. The settings you find under System settings ט Pictureט
more ... ט PC IN - Display.
Connecting devices with component connection (YPbPr / YUV)
External units with component connection YPbPr (often informally
referred to as YUV; see also Glossary) can be connected to the AVS
socket of the TV set using two adaptors. In addition to the VGA adaptor,
a component VGA adaptor is required (available from your dealer).
The other units are connected as described in the left column.
8 VIDEO
7 PC IN
9 SPDIF
AV list
Note: If you press for
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.
OK

External devices
(1
Adaptor set is available as an accessory (see chapter Accessories).
VGA
AUDIO
AVS
PC
TV-Gerät