Reference TV Reference lD 55 Reference lD 46 Reference lD 40 r e lt a h tz 35319022 Pla User guide
Reference ID 40-55 User guide Imprint Imprint Loewe Technologies GmbH Industriestraße 11 D-96317 Kronach www.loewe.de Printed in Germany Editorial date 07/14-3.0 TB © Loewe Technologies GmbH, Kronach ID: 2.3.24 All rights including translation, technical modifications and errors reserved.
Reference ID 40-55 User guide Table of contents Imprint...........................................................................................2 Welcome ........................................................................................5 Scope of delivery .......................................................................................... 5 About this user guide ................................................................................... 5 For your safety.............................
Reference ID 40-55 User guide Table of contents System settings (continued) .................................................. 118 Connections ...............................................................................................118 Sound components ...............................................................................119 Antenna DVB .......................................................................................... 123 AV connection settings .....................................
Reference ID 40-55 User guide Welcome Thank you, for choosing a Loewe TV set! At Loewe we combine the highest requirements regarding technology, design and ease of use. This applies equally for TV, video and accessories. In addition to sleek design and a varied combination of colour and mounting choices, your Loewe TV set offers a host of technological options.
Reference ID 40-55 User guide For your safety For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety advice below: Use for the intended purpose and ambient conditions This TV set is intended exclusively for receiving and playing visual and audio signals. It must not be used in rooms with a high level of humidity (e.g. bathroom, sauna) or a high dust concentration (e.g. workshops).
Reference ID 40-55 User guide For your safety Set-up Automatic shutdown Loewe flatscreen TV sets are specified for Loewe accessories. The TV set is suitable for mounting in many different ways. Note the assembly instructions regarding the different possible mounting options. If the TV is not operated for 4 hours (adjustment of volume, programme change, etc.) the TV will automatically switch to stand-by mode to save energy.
Reference ID 40-55 User guide Basic Functions On/Off of the television set Switching the TV set ON / switching it OFF in Standby mode (Mains switch must be switched ON) When TV set is switched on: Press key long: Switch TV set and all CEC-capable devices connected to the HDMI interfaces OFF to Standby mode (System Standby). General navigation Navigation on the user interface, select objects Select station OK short: Call station list. Or: OK long: Call expanded station list.
Reference ID 40-55 User guide Remote control 1 Sound mute/on 1 2 3 4 5 6 2 LED display for currently operated device 33 32 31 30 3 Switch to TV mode 4 Reassign remote control to SetTop-Box (PACE DS440N) (1 5 DR+ archive on/off 6 Define active object as favourite 7 Electronic Programme Guide on/off 8 Teletext/MediaText (3 on/off 9 Call function list 29 10 V+/V- Increase/reduce volume 11 Call station list / expanded station list In the menu: confirm/call up 12 Green coloured key: screen on/off 8 9
Reference ID 40-55 User guide Operating controls on the TV set 5 6 7 – VOL + 8 9 10 MENU RADIO * Functions of the operating elements 1 Mains switch: The mains switch is located on the rear side of the set. Always return the TV set to Standby mode before switching it off with the main switch. The TV set will be completely separated from mains only when you unplug the mains cable.
Reference ID 40-55 User guide Connections rear side of the device 25 24 23 22 21 20 19 18 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 AC IN - Mains connection 13 HDMI 1 - HDMI input 1 (with HDMI ARC support) 2 RS-232C - Serial interface 14 HDMI 2 - HDMI input 2 3 CONTROL - Rotating stand control 15 LAN - Network connection 4 IR LINK - Infrared transmitter connection 16 USB - USB connection 5 AUDIO OUT - Audio output (analogue) 17 HDMI 3 - HDMI input 3 6 CENTER IN - Centre aud
Reference ID 40-55 User guide Preparing the TV set Installing the TV set Connecting the TV set Mounting options Connecting to the mains supply Your Loewe specialist dealer can assist you in finding other mounting options that correspond to your needs. Use exclusively Loewe mounting options (e.g., wall bracket, floor stand), which you will find in the chapter Accessories, section Mounting options. Remove the cover for the connections.
Reference ID 40-55 User guide Preparing the TV set Connecting the TV set to the Home network Bundling the cables You may link your TV set to the home network by a wired connection (Ethernet, Powerline) or by a wireless radio connection (WLAN). Please contact your specialist dealer for more information on Powerline. For the network adaptor configuration, see chapter System settings, section Multimedia / Network – Network settings.
Reference ID 40-55 User guide Switching the TV set ON/OFF Switching the TV set on by means of the remote control Switching the TV set ON/OFF Press the on/off key. Switching TV set to the standby mode Press the mains switch at the rear side of the set. The indicator in the Loewe eye on the front side lights up white. The set is now in standby mode. Or: Press the TV key. The previously watched station will be called. Or: Press numerical keys 1-9. The corresponding station will be called.
Reference ID 40-55 User guide General information on menu operation General information on menu operation Some keys of the remote control for operating the TV set you will use more often than others. The most important keys for navigation will be explained in general. The numbers in the text refer to the figure showing the remote control in chapter Remote control. The arrow keys 22 help you to navigate in the menus and lists of the TV set and for selecting menu items.
Reference ID 40-55 User guide General information on menu operation Screen structure: Setup (example: picture) A B Picture C 3D Picture adjustment Navigation: Wizards D If your desired display format has not been automatically selected then you can choose it in the 3D settings menu. You may display the 3D image in 2D or vice versa. DVB-S settings (ASTRA1 19,2°E) Please specify whether you want to search for scrambled stations too.
Reference ID 40-55 User guide General information on menu operation Entering characters with on-screen keyboard For certain functions, entering letters or characters is required, e.g., for Web addresses (URLs) in the browser or for renaming archive entries. An on-screen keyboard appears for entering text. Enter/change internet address Back http://www.loewe.de q a Adopt (2 sec) OK w s e r d t z f g u i h j k y x c v b n m .-/ 1 2 3 4 5 6 7 8 www. .de Space Delete .
Reference ID 40-55 User guide General information on menu operation Info display Operation without remote control The info display provides an info text appropriate to the on-screen display that can assist you further with the operation of your TV set. Local control at the TV set – VOL + An on-screen display is faded in. The factory setting is that the info display is shown automatically for each menu item. In this case you can temporarily hide the info texts with the INFO key.
Reference ID 40-55 User guide LED backlighting LED backlighting The LED backlighting object. (1 turns your TV set into a shining decoration The LED backlighting is temporarily controlled via the local control of the TV or the remote control. The function of the LED backlighting is reset to the default of the general preset of System settings טControl טmore ... טLED light module as soon as the TV set changes its operating mode (switching on or off).
Reference ID 40-55 User guide Initial installation Initial installation wizard Initial installation after switching on for the first time The Initial installation wizard starts automatically with an initial installation. It may be called repeatedly again (see chapter Extras ,section Special functions – Repeat initial installation). Energy Home mode: efficiency The emphasis for home use is on low energy consump(continued) tion. The automatic dimmer is activated.
Reference ID 40-55 User guide Initial installation Selecting antennas Setting options for reception via analogue cable: Connect antenna cable(s) Your television will automatically search for stations. With OK , highlight which antenna cables are available for your TV set and connect them to the correct antenna sockets, which are specified here in the right-hand column.
Reference ID 40-55 User guide Initial installation Setting options for DVB-T reception: If you have not selected DVB-T antenna in the list of available antennas: Proceed to Setting options for DVB-C reception. If a CA module is plugged in during Initial installation and if the item Station of the special station list was selected in Extent of station search, the routine continues with the step Supply voltage (see right column).
Reference ID 40-55 User guide Initial installation Setting options for DVB-C reception: If you have not selected DVB-C antenna in the list of available antennas: Proceed to Setting options for DVB-S reception. If a CA module is plugged in during Initial installation and if the item Stations in the special station list was selected in Extent of station search, the station list of the CA module will be adopted. Further settings described on this page will then be skipped.
Reference ID 40-55 User guide Initial installation Setting options for DVB-S reception: If you have not selected DVB-S antenna in the list of available antennas: Proceed to Setting options for all types of reception. 2 satellites Reception of two different satellites with two LNCs on 22 kHz (LNBs) which are connected to the TV set by a 22 switchbox kHz switchbox. Network selection Network selection Please state from which network you wish to receive your station.
Reference ID 40-55 User guide Initial installation Setting options for the satellite system (single satellite): Select single satellite Satellite selection Select satellites Please specify here which satellite you receive. Note: The newly selected parameter must be confirmed with the Setting options for the satellite system (2 satellites on 22 kHz switchbox / 2 satellites on toneburst switch): OK button.
Reference ID 40-55 User guide Initial installation LNC . frequencies Setting options for the satellite system (max. 4 satellites on DiSEqC multiswitch): DiSEqC multiple switch Settings DiSEqC multiple switch With the refresh rate you determine how often a DiSEqC command is output. This is only necessary in a cascaded system. Your system provider will bei able to tell you more about this.
Reference ID 40-55 User guide Initial installation LNB . frequencies Setting options for the satellite system (DiSEqC one cable communal system): Number of system channel used LNB frequencies Please specify the oscillator frequency for the Low Band. High band frequency is auotm. adjusted Note: The newly selected parameter must be confirmed with the OK button.
Reference ID 40-55 User guide Initial installation Setting options for the satellite system (other communal installation): Select single satellite Select satellites Please specify here which satellite you receive. Note: The newly selected parameter must be confirmed with the OK button.
Reference ID 40-55 User guide Initial installation Setting options for DVB-S reception (continued): Test reception You should now receive a picture and sound from the following satellite: Astra1 19,2°E C/N Level Otherwise, please adjust your antenna. If it is already correctly adjusted, please continue all the same, without receiving picture or sound for the moment.
Reference ID 40-55 User guide Initial installation Age-related . lock Setting options for all types of reception: Subtitle and audio languages (DVB only) Subtitle and audio languages (DVB) You can preset the desired languages and reserve languages for subtitles and audio for DVB programmes here. Age-related lock If you enter an age restriction here, all DVB programmers are locked which have an appropriate age code and can only be watched by entering the access code.
Reference ID 40-55 User guide Initial installation Sound playback via ... Sound playback via ... Please specify here via which sound components you want to listen to your TV sound. If you select a "Speaker system", this must be connected to the DIGITAL AUDIO LINK socket on the back of the TV set (with an additional adapter if necessary). Note: The newly selected parameter must be confirmed with the OK button.
Reference ID 40-55 User guide Home view Description of the individual sections/functions: Home view The Home view is the central overview page for all of your TV set‘s operating modes. TV: Here you call the TV mode of your TV set. See chapter TV for further information. The list of options on the left of Home view gives you access to TV, Video, Audio/Radio, Photo and Web. By means of Extras and System settings you have access to more functions and you can configure your TV set.
Reference ID 40-55 User guide Home view Favourites Home - Favourites You will find your favourites on the right of the individual operating modes. You can create favourites in the operating modes of the TV set. In this way you get a collection of your favourite music titles, your preferred stations and often visited Internet sites on a single overview page.
Reference ID 40-55 User guide TV Volume / Station Selecting a station out of the station list TV In TV mode that can be selected via the Home view, you can use the basic TV functions of your TV set. In TV mode you will have numerous functionalities at your disposal as, for instance EPG and, if offered by the station, HbbTV (hybrid broadcast broadband television). By means of the function list you may call additional options and settings all around TV operation.
Reference ID 40-55 User guide TV Station Selecting stations by means of the expanded station list Selecting stations by personal lists You can save your preferred stations in up to six personal lists (e.g., for several users). Each personal list can contain up to 99 stations. In normal TV mode, without other displays: Press OK longer: Call expanded station list. Personal list existing. Back Expanded station list 1 Das Erste HD 13 ZDF.kultur HD 2 ZDF HD 14 ZDFinfokanal HD 3 BR Nord HD 15 SAT.
Reference ID 40-55 User guide TV Status display Explanations of the symbols in the status display (cont'd): Status display Transmitted audio signal: In normal TV mode, without other displays. Mono INFO: Show status display. 10 ZDF HD 21:30 21:00 - 21:45 Toskana 21:45 - 22:00 heute-journal 18.07.
Reference ID 40-55 User guide TV Function list / AV list Explanations of the symbols in the function list (continued): Function list The function list contains settings and additional options. The individual list items will be briefly explained as follows: The function list can be opened directly in TV mode or via the station list. Depending on this, some list items may possibly not be available. In TV mode: MENU: Call function list. 9 Here you can display your "Electronic Programme Guide".
Reference ID 40-55 User guide TV Electronic Programme Guide Meaning of the colours in the EPG Electronic Programme Guide – EPG EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed programme guide, you can learn about the current programme. In addition programmes can be sorted according to certain topics, memorised, and also recordings can be programmed. The coloured labels indicate the genre of the respective programme.
Reference ID 40-55 User guide TV Electronic Programme Guide Programme preview Calling additional information about the programmes Mark desired station in the station list. OK press long: show preview. INFO: Call up detailed information. Detailed info In the top left window, the current programme of the selected station is displayed now. Back 5 ProSieben 16:45 07.01.14 16:30-16:58 How I Met Your Mother Stations are only changed in the preview window.
Reference ID 40-55 User guide TV Electronic Programme Guide Timer programming by means of EPG Adapting the EPG Overview You can programme timer recordings of TV programmes conveniently using the EPG. Mark the desired broadcast. Select day or genre. OK Confirm selection. Today 17:46 All genres 18:00 19:00 20:00 SOKO Wismar 10 ZDF HD 17:46 mieten, kaufen, wohnen 14 Sat. 1 push - das SAT.
Reference ID 40-55 User guide TV Teletext Teletext Additional page selection possibilities Your TV set supports the two operating systems TOP text and FLOF. Up to 1,000 / 2,000 pages (1 are stored so that you have quick access. First possibility: Starting and ending Teletext Second possibility: INFO: Call overview page 100. Directly enter the page number. TEXT: Call teletext. The function of the TEXT key can be set. The factory default is Standard teletext first.
Reference ID 40-55 User guide TV Teletext / Rotate TV Newsflash Rotate TV Some text pages, e.g., live tickers, will be permanently updated. In order to keep track of changes and also to be able to watch the TV programme at the same time you may hide the Teletext temporarily and can still remain informed on updates of the page. Mark Newsflash, confirm with OK.
Reference ID 40-55 User guide TV HbbTV / MediaText HbbTV / MediaText Open HbbTV text directly HbbTV (1 (Hybrid broadcast broadband television) offers the user comprehensive multimedia contents, e.g., media centres or additional information on the current programme as far as they are provided by the station. Depending on the programme provider, the direct Call of MediaText may not be possible. MediaText must then be opened by means of the HbbTV application.
Reference ID 40-55 User guide TV PIP Starting and ending PIP mode Picture in Picture (PIP) The concurrent display of two different images is referred to as Picture in Picture. PIP: Show/hide PIP display. The size of the PIP display can be changed in the system settings (see chapter System settings, section Control – PIP). Simultaneous display of... z (yes) / – (no) a digitally broadcast channel (DVB-T/C/S) and picture from an AV source (e.g.
Reference ID 40-55 User guide TV Digital Recorder Digital-Recorder – Overview of functions You can record programmes on the integrated hard disk of your TV set with the digital recorder of your Loewe TV set. The various ways in which your Digital Recorder can be used are listed below.
Reference ID 40-55 User guide TV Digital Recorder Returning to live picture (end timeshift television) TV viewing with time shift The TV broadcast that you watch is automatically recorded in the background. You can stop the TV programme at any time and continue watching it later with a time shift. The maximum time shift is three hours. Recording of analogue stations is not possible. During time-shift operation, the output signal for external devices at the AV connection is switched off.
Reference ID 40-55 User guide TV Digital Recorder Archive recording Recording of analogue stations is not possible. Recordings of CI Plus encrypted programmes are perhaps not possible or only to a limited extent. Direct recording Press the RECORD key for a short period: Start direct recording. Recording dialogue for the current broadcast is called. Films that you wish to watch at a later date can be recorded in the Digital Recorder Archive (DR+ archive). Select recording time, OK proceed.
Reference ID 40-55 User guide TV Digital Recorder Setting bookmarks during archive recording During a running archive recording you can create bookmarks (by pressing the PLAY key a little longer). You will see a message on the screen. Bookmarks also serve as starting and end points of intervals. Viewing another programme from the archive during archive recording After you have started the recording, you can also watch a programme you have already recorded. Open the DR+ archive.
Reference ID 40-55 User guide TV Digital Recorder DR+ archive function list DR+ archive With the DR+ archive you have access to all the recorded programmes and start playback. The function list of the DR+ archive contains the individual function for its archive entries. Mark the recorded broadcast. An automatic Delete Manager always ensures that there is sufficient recording space for new movies. MENU: call function list. Open the DR+ archive ... Open the DR+ archive.
Reference ID 40-55 User guide TV Digital Recorder Displaying detailed information on the recording Deleting recordings from the archive If detailed information exists on the recorded broadcast from the EPG, you can deplay it. The desired entry in the DR+ archive is marked. STOP key: Call delete dialogue. The desired entry in the DR+ archive is marked. MENU: Call function list. Or: Mark Detailed info, OK Display detailed information on the broadcast. MENU: Call function list.
Reference ID 40-55 User guide TV Digital Recorder Copying/Moving your recordings Setting/cancelling delete protection You should copy recordings that you want to save permanently on an external USB hard disk. You can provide films with a delete protection to prevent an automatic deletion by the delete manager. Copying recordings, which originate from a CI Plus encrypted station, is perhaps not possible or only to a limited extent. The desired entry in the DR+ archive is marked.
Reference ID 40-55 User guide TV Digital Recorder Locking/unlocking a movie (Parental lock) You can lock movies that your children are not permitted to view, for instance. Playback is then only possible after entering a PIN. In order to activate the Parental lock, a code number (PIN) must have been defined beforehand (see chapter System settings, section Control – Parentol lock). The desired entry in the DR+ archive is marked. MENU: Call function list. Mark Parental lock, OK Call. ...
Reference ID 40-55 User guide TV Digital Recorder DR+ Streaming Follow me function You can release your DR+ archive entries in order to view these on other Loewe TV sets linked to the network. The Follow me function enables you to interrupt a current broadcast and to continue viewing at an alternative TV set from the point of interruption. To use DR+ Streaming, at least two Loewe TV sets with MB180, SL1xx or SL2xx chassis are required (at least one of which has DR+ integrated).
Reference ID 40-55 User guide TV Media+ General information on media reproduction Accessing your media Home view gives you access to photos, videos and music from your personal storage media, e.g., from storage media connected via USB and from media servers in your home network to which your TV set is connected. HOME: Call Home view. TV The item Web gives you access to an Internet browser and multimedia data from the Internet. Video Das Erste HD ZDF HD RTL Television SAT.
Reference ID 40-55 User guide Video Video Function list Video The item Video gives you access to videos from local (USB, home network) and online sources. The individual subitems are described in detail in the following. High definition movie material (HD movies) from format 720p upwards (resolution 1280 x 720 or higher) should be played back via a wired connection. If there is a wireless connection, then technical limitations (e.g.
Reference ID 40-55 User guide Video Video playback Symbol Remote control key Description General information on video playback long The description of the following functions applies to the playback of videos from the DR+ archive as well as for videos from USB storage media or from media servers in the home network. For playback of DR+ archive entries we have additional playback and editing capabilities.
Reference ID 40-55 User guide Video Pause playback (freeze picture) Skipping with Smart jump PAUSE key: Switch to freeze picture. Back DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna The Smart jump function ensures that the jump width is halved each time the jump direction is changed or doubled after three jumps in the same direction (max. 8 minutes). This way you can quickly find a certain spot of the recording.
Reference ID 40-55 User guide Video Wind Repeat To search for desired scenes in movies you can fast forward and rewind at three different speeds. Sound is not audible during winding. Videos can be repeated, i.e., replayed in an endless loop. Depending on the source (DR+ archive, USB storage medium, media server in the network), single or all videos can be replayed in an endless loop. or press a little bit longer.
Reference ID 40-55 User guide Video Slow motion Select language/sound At an active pause (freeze frame) you can select from four slow motion speeds (for wind/rewind). There is no sound during slow motion replay. When viewing HDTV slow motion backwards is not possible. Videos, especially those recorded from TV broadcasts, can contain several sound tracks. Select sound track/language: Show status bar. PAUSE key: Switch to freeze picture.
Reference ID 40-55 User guide Video Additional functions for DR+ archive playback Interval functions There are additional editing and playback functions for playback of recorded programmes from the DR+ archive. These are explained as follows. The intervals between manually or automatically set bookmarks (intervals) can be faded out for future playbacks. In addition to that, unwanted intervals at the beginning or end of your recorded broadcast can be deleted. An archive entry is replayed.
Reference ID 40-55 User guide Video Hiding intervals Deleting intervals Defined intervals will be deleted when you delete the corresponding bookmark at the beginning or the end of the interval. The Interval functions are activated. mark Hide, OK hide current interval. DR+ archive: ZDFinfo HD 17:05 - 17:50 Back Flora und Fauna Jumping to Bookmarks mark next bookmark , OK Jump to next bookmark.
Reference ID 40-55 User guide Video Deleting individual bookmarks Subtitles Subtitles of a broadcast can also be stored during recording see chapter Extras, section Timer – Entering the Timer data. Jump to the manually set bookmark to be deleted. Back DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna Showing recorded subtitles during playback: Show status bar. mark Settings OK Call settings. 00:00 23:51 , 45:00 mark Subtitles, OK Call up available subtitles.
Reference ID 40-55 User guide Audio/Radio Audio/Radio With item Audio/Radio you find music files from your local server(s) and USB storage media and you access DVB and Internet radio. The individual subitems are described in detail in the following. Calling Audio selection Audio/Radio Function list The audio/radio function list contains the individual functions for your music titles. MENU: Open function list. ... HOME: Call Home view. Mark Audio/Radio, OK call list of audio sources.
Reference ID 40-55 User guide Audio/Radio Pause playback Audio playback PAUSE key: Stop current playback. Description of the symbols in the status display for audio playback Snow Patrol / Eyes Open Snow Patrol / Eyes Open Back Back Hands Open Chasing Cars 00:00 Hands Open Chasing Cars 02:56 04:27 Shut Your Eyes 02:56 00:00 Shut Your Eyes 04:27 PLAY key: Continue playback. Wind Symbol Remote control key Description Call list view (select music title / station).
Reference ID 40-55 User guide Audio/Radio Select another title / play current title from start Repeat Music titles can be repeated, i.e., replayed in an endless loop. BACK: Call music selection. Select music title as described in chapter Audio/ Radio, section Selecting music titles. Show status bar. Or: , Mark Repeat title OK Switch the repetition of the individual music title ON/OFF. Press P+ : Play next title of current album / directory.
Reference ID 40-55 User guide Audio/Radio Switching the screen ON/OFF Green key: Switch screen OFF. Or: Snow Patrol / Eyes Open Hands Open Back Chasing Cars Shut Your Eyes 02:56 00:00 Mark Screen off OK Switch screen off. 04:27 , Switching off the screen reduces the power consumption of the TV set. Switch on the screen with the remote control: Press green key. Switch on the screen on the TV set: RADIO Press RADIO on the local control of the TV set.
Reference ID 40-55 User guide Audio/Radio Radio mode (DVB radio) Setting the volume The TV set can receive digital radio stations via DVB. V+/V– Volume up/down. The AUDIO key has been preset for radio operation in the factory. Other sound settings are the same as for the volume setting in TV mode (see chapter TV, section Setting the volume). Radio mode on AUDIO key on the remote control Or RADIO Press RADIO on the local control of the TV set.
Reference ID 40-55 User guide Audio/Radio Radio mode (Internet radio) Setting the volume The TV set can receive digital radio stations via the Internet. V+/V– Volume up/down. The names of the directories and stations in the Internet radio mode are given by the provider vTuner. Changing the arrangement of stations or renaming them is not possible here. Other sound settings are the same as for the volume setting in TV mode (see chapter TV, section Setting the volume).
Reference ID 40-55 User guide Photo Photo function list Photo Via menu item Photo you can view photos from your local media and from online sources on your TV screen. The individual subitems are described in detail in the following. The photo function list contains the individual functions for your photos. MENU: Open function list. Calling Photo selection ... Slide show HOME: Call Home view. Sorting Favourite Mark Photo, OK call list of photo sources.
Reference ID 40-55 User guide Photo Full-screen mode Photo display A photo is marked. Description of the symbols in the status display for photos OK View photo in full-screen mode. USB1 -> CRW_7266b Back USB1 -> CRW_7266b Back Show previous / next picture. Symbol Remote (icon) control key Description Rotating the photo – Call list view (select photo). – Rotate photo by 90 degrees to the left. – Rotate photo by 90 degrees to the right. On-screen display of status bar. Mark or .
Reference ID 40-55 User guide Web Web MediaNet Here you have access to multimedia content in the Internet (MediaNet) as well as a high-quality web browser. Call MediaNet WEB: Call MediaNet (1. Calling the Web selection HOME: Call Home view. Mark Web, OK call Web. MediaNet Thus you open the Web-APP Portal. Browser or HOME: Call Home view. Select Web, OK call. Mark MediaNet, call. Home MediaNet - Home Browse New Settings Imprint Recommendations mark function, OK call.
Reference ID 40-55 User guide Web MediaNet – Browse Define application as favourite MediaNet-Browse is called. Mark the desired application. Under the item Browse, you browse the full range of applications by topic. Add the marked application to the Home favourites. Back All MediaNet - Browse Recommendations All The favourite will be added to Home view and placed at the end. Video MediaNet – Settings Photo MediaNet settings are called.
Reference ID 40-55 User guide Web Browser Entering a URL (Internet address) You can access Internet sites directly using the integrated Opera browser. The web browser can also be used without an Internet connection. Thus you can access local devices which provide a web interface (e.g. router, home control, home network server). Browser status is displayed. Mark the URL (Internet address) of the indicated Internet site, OK Open address entry box.
Reference ID 40-55 User guide Extras Extras Timer Extras contains additional functions and settings (e.g., Timer list, CA module settings). Timer list Call Extras HOME: Call Home view. Mark Extras, OK call Extras. Timer This allows you to open a list which contains all the programmed timertasks. Software DR+ Streaming Energy efficiency CA module Viaccess CA module AlphaCrypt All programmed recordings, earmarked programmes and copy jobs are listed in the timer list.
Reference ID 40-55 User guide Extras Timer New instruction: New recording New recording – Manual recording (current station) In the Timer list, New recording is selected. In the Timer list: Mark Create newly, OK call. Mark New recording, OK call. The function list for recording will be opened. Manual recording 9 Recording Current programme 9 ZDF HD 20:15 - 21:45 Toskana Mark recording duration.
Reference ID 40-55 User guide Extras Timer New recording – Current programme Record conflict After calling the Current programme the timer data dialogue will be displayed. The current programme is preset in the timer data. If you wish to programme a new recording which overlaps a timer recording already saved, the Recording conflict dialogue will open. Determine whether one or both recordings are to be made here. Check timer data and correct them, if required. Mark Adopt to Timer.
Reference ID 40-55 User guide Extras Timer Entering the Timer data After selecting the station you wish to record, timer data will be displayed. The setting options for the timer data differ depending on the recorder selection, whether an analogue or DVB station is to be recorded or via which route (EPG, manually) the recording has been programmed.
Reference ID 40-55 User guide Extras Timer Explanations of the setting options in the timer functions menu: Timer Services This menu offers you convenient alarm services. Programmed alarms are also active when the TV set has been switched off to standby. If the TV set is switched on from the standby mode by alarm, a screen message appears. If this is not confirmed within 5 minutes with the OK key, the TV set switches automatically off again for safety reasons.
Reference ID 40-55 User guide Extras CA module Conditional Access module (CA module) In order to receive coded digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set. The CA module and the Smart Card are not part of the set of equipment supplied with the TV set. They are usually available from your dealer. Loewe does not provide any guarantee for the functioning of the CA module.
Reference ID 40-55 User guide Extras CA module / DR+ Streaming DVB Common Interface Standard (CI) DR+ Streaming Selection possibilities in the CA module menu and performance capability of your CA module depend on the type of module used and the software installed on it. Consult the manufacturer of the module if you have any questions. Here, you can switch off the TV set to the advanced standby mode for DR+ Streaming.
Reference ID 40-55 User guide Extras Special functions / Integrated features Special functions Integrated features Calling special functions Here you can obtain information on the integrated features of the TV set. HOME: Call Home view. Mark Extras, OK call Extras. Mark Special functions, go to next column. See the rating plate on the rear of the set for the precise product designation. Call Integrated features HOME: Calling the Home view. Mark Extras, OK call Extras.
Reference ID 40-55 User guide System settings System settings Under the menu item System settings in the Home menu you find all settings and adaptabilities of your TV set. These are explained to you more in detail as follows. Calling System settings HOME: Call Home view. Mark System settings, OK call. Picture Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.
Reference ID 40-55 User guide System settings Picture Explanations of the picture settings (continuation): Picture Here you do the settings referring to the representation of the picture signal on your TV set. Calling picture settings HOME: Call Home view. Mark System settings, OK call System settings. Mark Picture, go to next column. Picture 3D If your desired display format has not been automatically selected then you can choose it in the 3D settings menu.
Reference ID 40-55 User guide System settings Picture Picture adjustment Selecting the picture format By selecting one of the three presets (Home Mode, Premium Mode or Shop Mode), the picture settings for whichever signal input group that is currently active will be set to predefined settings. You can use Personal Mode to specify individual settings for contrast, colour intensity, colour temperature, sharpness and digital noise suppression.
Reference ID 40-55 User guide System settings Picture 3D function Explanations of the 3D settings: You can use the 3D functionality of your TV set to display 3D material transmitted by a channel or from an external player that is connected. You require a pair of Loewe Active Glasses 3D to be able to use the 3D functionality in its entirety (see chapter Accessories). Please read the operating instructions included with the 3D glasses.
Reference ID 40-55 User guide System settings Picture Picture format / 3D mode If 3D contents are recognised by the TV device, the picture format cannot be subsequently changed. The picture format when in 3D operation is always 16:9 PC. Instruction / Symbol If 3D content is detected by the TV set, a corresponding message appears. The instruction text will disappear after the display time has elapsed. The following images will be displayed in 3D mode.
Reference ID 40-55 User guide System settings Sound Sound Explanations of the sound settings (continued): Calling the sound settings The selectable menu items depend on the selected station and the connected sound components (e.g., sound projector). HOME: Call Home view. Mark System settings, OK call System settings. Mark Sound, go to next column. Sound Sound mode Sound adjustment Loudness Souond picVolume adjustment more ...
Reference ID 40-55 User guide System settings Sound / Stations Explanations of the sound settings (continued): more ... Loudspeaker/ For analogue stations: Headphone Selection options for Mono/ Stereo or Sound 1 or sound Sound 2 for bilingual programmes, separately for the loudspeakers and the headphones. For DVB channels: You can choose here if you wish to listen to a special soundtrack for the visually impaired over the speakers.
Reference ID 40-55 User guide System settings Stations Automatic scan TV+Radio For automatic scan TV+Radio, a search wizard will be started that searches for new stations which are not yet stored. You have to repeat the initial installation and automatically search for new stations if you want to delete all the existing stations and automatically search for new ones. HOME: Call Home view. Mark System settings, OK call System settings. Mark Stations, go to next column.
Reference ID 40-55 User guide System settings Stations Search for/update stations – handling of new and no longer found stations The number of new TV stations found is displayed after the automatic search / update has been completed. Proceed. The number of new radio stations found is displayed. Here, you can enter all the settings available for a station. However, this requires detailed knowledge. The manual search of radio stations is similar to that of TV stations.
Reference ID 40-55 User guide System settings Stations Manual search for cable analogue (analogue cable reception): Manual search is called. Manual DVB-T/C/S search: Manual search is called. Cable analogue has been selected as signal source. ... Signal source Cable analog DVB-T TV standard B/G I D/K Colour standard PAL Channel E 01 Frequency 044.00 MHz L Back DVB-C DVB-S M Signal source Cable analog Frequency 044.
Reference ID 40-55 User guide System settings Stations Station lists TV / Radio Move block / Change order Under the menu item Station lists TV or Station lists Radio you can edit (delete block, move block, restore deleted stations) various lists, e.g., DVB-T, ASTRA LCN, DVB-C, etc. You can also create and edit new Personal lists. The function of Station lists Radio is similar to that of Station lists TV. Therefore, editing of Station lists Radio will not be dealt with separately.
Reference ID 40-55 User guide System settings Stations Adding stations to Personal list Compose / edit Personal list Each personal list can contain up to 99 stations. You can compose the personal lists to suit your convenience (e.g., topic lists). Other persons using this TV set can create their own personal lists. You can create up to six personal lists. Creating and updating personal station lists is not possible as long as a programmed timer recording is active.
Reference ID 40-55 User guide System settings Stations Update station list automatically Some programme providers offer an automatic update of the station lists (Dynamic Channel Management). You may Allow or Block an automatic station list update. If automatic updating is allowed, a screen message about an available update appears whenever the list is changed. Allow/block updates HOME: Call Home view. Mark System settings, OK call System settings. Mark Stations, go to next column.
Reference ID 40-55 User guide System settings Control Control more ... In the chapter Control you find settings for the various operating modes like PIP and DR+ as well as settings referring in an interfunctional way to your TV set like, for example, time and date and on-screen displays. Calling Control HOME: Call Home view. Mark System settings, OK call System settings. Select Control, go to next column.
Reference ID 40-55 User guide System settings Control Language EPG Specify the language for all menus in the TV set in the language menu. The language for the DVB subtitles and the film language can be set for DVB programmes. Calling EPG settings HOME: Call Home view. Mark System settings, OK call System settings. Call language Mark Control, go to next column. HOME: Call Home view. Mark System settings, OK call System settings. Mark EPG, go to next column.
Reference ID 40-55 User guide System settings Control Explanations of setting possibilities in the Parental lock menu: Parental lock You can select and set various security options to prevent unauthorised use of the TV set and to protect your children from unsuitable programmes. Call Parental lock menu HOME: Call Home view. Mark System settings, OK call System settings. Lock single You can lock / unlock individual or all of the stations stations in the station list specifically.
Reference ID 40-55 User guide System settings Control Energy efficiency Quick start mode Determine how energy efficient your TV set shall be. The value for the contrast (and thus the brightness of the background lighting) is adapted and the automatic dimmer activated or deactivated depending on the presetting. If you enable the Quick Start Mode and you switch on the TV set from standby, the TV picture can be immediately seen without delay.
Reference ID 40-55 User guide System settings Control Software update USB stick - requirements It is possible to update the software on your Loewe TV set. USB sticks tested by Loewe and compatible in type and format can be ordered from the Loewe dealer using the article no. 90456.900. In the software update (package update) all the software releases in the TV are scanned and updated as required. Updating the software is not possible as long as a programmed timer recording is active.
Reference ID 40-55 User guide System settings Control Software update via USB storage device To do this, plug the USB stick with the downloaded software into a free USB port of the TV set. New software package found New software ... Via USB A new software version was found. New software: V2.3.14.0 (Current software: V.2.1.25.0) If you now wish to load the new software, press the close with the button. Calling Software update button.
Reference ID 40-55 User guide System settings Control New software package found Manual update via the Internet If an Internet connection is available, new software can be downloaded directly and installed onto the TV set. New software ... Start update A new software version was found. New software: V2.3.14.0 (Current software: V.2.1.25.0) If you now wish to load the new software, press the close with the button. Calling Software update button.
Reference ID 40-55 User guide System settings Control Load new software package Software update via Antenna A software update via antenna is only available for stations of the Freeview DVB-T platform in the UK and Ireland. Updating software ... Via antenna The "V2.3.14.0" software is currently being programmed, please wait ... 60% Note: The loading and programming process can take up to approx. 50 minutes in total. Please do not switch off your TV set at the mains during this time.
Reference ID 40-55 User guide System settings Control Automatic update via the internet At the end of the initial installation, Information on new software updates was selected. This item cannot be called up via the menu, but appears automatically when a new version is found in the search for software. New software package found If the TV set has found a new software version during the check, you will be informed about this via a screen message. Select the desired procedure.
Reference ID 40-55 User guide System settings Control On-screen displays Time and date You can select different settings in this menu which affect the onscreen displays. Time and date are automatically detected and set via the DVB programme provider (e.g. Astra, UPC) or, during an Internet connection, via Internet time services. Call On-screen displays If a definite time has been detected by the TV set (depending on the programme provider), time and date cannot be changed. HOME: Call Home view.
Reference ID 40-55 User guide System settings Control DVB settings PIP You can make general pre-settings for DVB stations. Adjust size of the PIP image HOME: Call Home view. Calling DVB settings Mark System settings, OK call System settings. HOME: Call Home view. Mark System settings, OK call System settings. Mark Control, go to next column. Mark Control, go to next column. Mark more ..., call other settings. Mark more ..., call other settings.
Reference ID 40-55 User guide System settings Control DR+ Call DR+ streaming settings You can adapt the Digital Recorder to your requirements. Call settings for the digital recorder HOME: Call Home view. Mark System settings, OK call System settings. Mark Control, go to next column. Mark more ..., call other settings. The DR+ settings are called (see left column). Mark DR+ Streaming, go to next column. ...
Reference ID 40-55 User guide System settings Control Standard Teletext In the Standard Teletext menu you can configure the Teletext. Call Teletext settings HOME: Call Home view. Mark System settings, OK call System settings. Mark Control, go to next column. Mark more ..., call other settings. Mark Standard Teletext, go to next column. ... Standard Teletext Special pages The programme preview pages and the page for the programme subtitles are specified here.
Reference ID 40-55 User guide System settings Control Start behaviour of HbbTV-stations HbbTV p HbbTV mode on/off When the HbbTV mode is active (factory setting), additional services and further information (e.g., also from the Internet) can be viewed if these are offered by the current station.
Reference ID 40-55 User guide System settings Control Feature of the TEXT key CA module(s) With the setting Standard Teletext first (factory setting), the standard Teletext is opened when the TEXT key is pressed for the first time. Pressing the TEXT key for a second time will then display the MediaText. Pressing the TEXT key for a third time will bring you back to the TV picture. If MediaText first is selected, the TEXT key will do the exact opposite.
Reference ID 40-55 User guide System settings Control Determine the active time of the LED backlighting LED light module Under the menu item LED light module (1 you make the basic settings for the LED backlighting of your TV set. HOME: Call Home view. Mark System settings, OK call System settings. Mark Active time, call settings for the active time. Active time ...
Reference ID 40-55 User guide System settings Control Rotate TV Specifying the switch-off position Here you can set the range of rotation for the motorized stand and define the switch-off position of your TV set. This is where you specify the position that the TV will take when it is switched off. In order for the TV set to return to the determined switchoff position when switching it off, this must be activated (see below).
Reference ID 40-55 User guide System settings Control Record WEB key function You can set a pre-record and post-record time for timer recordings made without auto time control. This minimizes the risk that a part of the broadcast is not recorded due to the broadcast starting earlier and/or finishing later. You can assign the Web key on the remote control unit a particular function. The selected function will then be called directly when the key is pressed.
Reference ID 40-55 User guide System settings Control Hard disks Formatting the hard disk Checking the hard disk If problems were detected when the hard disk was being tested (see left column), re-formatting may be able to remedy the problem. Additionally, you can re-format the hard disk in order to quickly and easily delete all the data stored on it. You should launch a check of the integrated hard disk once a year or if problems arise when starting recordings (e.g.
Reference ID 40-55 User guide System settings Multimedia / Network Network Network settings Under Network settings you make settings to your network adaptors and the various types of media. Call network settings The Network wizard will be started. You see the current network status. Change network settings. Network selection HOME: Call Home view. Select network mode Mark System settings, OK call System settings. Mark Multimedia / Network, go to next column.
Reference ID 40-55 User guide System settings Multimedia / Network Configuration of the built-in LAN adaptor Configuration of the built-in WLAN bridge adaptor The network wizard was called via the network access setting On, wired only. The network wizard was called via the network access setting On, wireless only or Wireless + bridge function. IP configuration Search for Access points Select type of IP configuration. The TV set now searches for wireless routers. BACK: Stop search.
Reference ID 40-55 User guide System settings Multimedia / Network Explanation of the adaptor settings: Network shows the current type of connection (wireless or wired). IP The current assignment method for the IP address configuration of your TV set (automatic or manual). IP address Your current IP address. Subnet mask Your current subnet-mask IP address. Proxy server settings In the proxy server wizard your TV set establishes the link with a home network with proxy server.
Reference ID 40-55 User guide System settings Multimedia / Network Multimedia settings Renderer Under this menu item you find further settings for Audio, Video and Photo. Here you can allow external devices to access your TV set (renderer) via app to render (play back) contents there. Calling the Multimedia settings menu Call up renderer menu HOME: Call Home view. Mark System settings, OK call System settings. Mark Multimedia / Network, go to next column.
Reference ID 40-55 User guide System settings Connections Connections Settings for the connection of external appliances are made in this menu. The menu item Connections is not available while a timer recording is active. Calling the connections menu HOME: Call Home view. Mark System settings, OK call System settings. Mark Connections, go to next column. Connections Sound components A wizard guides you step by step through the configuration of your sound reproduction components.
Reference ID 40-55 User guide System settings Connections Sound components The sound components wizard helps you to configure the components that are used to reproduce the TV sound. For sound reproduction, you can configure the TV loudspeakers, active loudspeakers, loudspeaker systems as well as analogue and digital HiFi/AV amplifiers. Your TV set is equipped with an integrated digital multi-channel audio decoder. Sound signals with up to six channels (5.
Reference ID 40-55 User guide System settings Connections Adjusting the speaker system Select the start value of the frequency response of the speakers for the correct setting (e.g., 50Hz for t h e s p e c i f i c a t i o n “ Fre q u e n c y re s p o n s e 50-20,000Hz”). See the technical data of the speakers for the value. Sound playback via ... – Speaker system Enter here that you want to hear the TV sound over a speaker system. If you connect active speakers, please use the setting Speaker system.
Reference ID 40-55 User guide System settings Connections Connect subwoofer Adjust speaker level Connect subwoofer ... Sound components Please specify here whether you want to additionally connect a subwoofer for very good bass reproduction. TV 100Hz 90Hz 100Hz no Adjust speaker level ... 100Hz Sound components 100Hz yes Back with You hear a sound from every speaker one after another. But you can also select the speakers manually with the menu control buttons up/down.
Reference ID 40-55 User guide System settings Connections Setting the HiFi/AV amplifier Sound formats Sound formats ... Sound components Sound playback via ... - HiFi/AV amplifier Please specify, what kind of sound formats can be processed by your HiFi/AV amplifier and mark them by the button OK .
Reference ID 40-55 User guide System settings Connections Antenna DVB AV connection settings Here you can make settings for the DVB-T antenna and call the antenna wizard for the DVB-S antenna. In the AV connection settings menu the parameters for the AV connection socket can be adapted. Call Antenna DVB Calling the connections menu HOME: Call Home view. HOME: Call Home view. Mark System settings, OK call System settings. Mark System settings, OK call System settings.
Reference ID 40-55 User guide System settings Connections Digital Link Gaming mode In the digital link menu you make further setting for comfortably linking external devices to the TV set. For the inputs of your TV set on which game consoles, PC applications or even Karaoke machines are operated, we recommend you to activate the Gaming mode. Your activities are then displayed quicker on the screen by reducing the complex picture improving techniques.
Reference ID 40-55 User guide System settings Connections Assign digital audio input TV-Gerät In order to be able to hear also the digital sound of an external device connected to an AV input, an AV input can be assigned to the digital audio input socket SPDIF IN of your TV set. By switching to this AV input, the digital audio signal at the SPDIF IN input is communicated to the integrated digital multi-channel audio decoder and the digital audio output socket SPDIF OUT.
Reference ID 40-55 User guide External devices Devices to the HDMI connections Connecting an external device via HDMI/DVI adaptor The HDMI connections (High Definition Multimedia Interface) allow the transmission of digital video and audio signals from a player (e.g. DVD player, Blu-ray player, game console, camcorder, set-top box) via a single cable. If your external device, e.g., a PC has an HDMI interface, you can also connect the this via an HDMI socket to your TV set.
Reference ID 40-55 User guide External devices Operation of Digital Link HD (HDMI CEC) enabled devices For playback with an external Digital Link HD enabled device connected to the HDMI socket of the TV set, user commands are transmitted to the external device with a few exceptions (volume, sound on/off). You will also be informed by an on-screen display as soon as you switch to the corresponding HDMI input. Pressing briefly TV switches to TV mode (back to previous station).
Reference ID 40-55 User guide External devices Devices on AV An additional device such as a DVD player, VCR/DVD recorder etc. can be connected to the TV set by means of an adaptor at the AV socket. The required Scart adaptor is part of the adaptor set. The adaptor set is available as an accessory from your Loewe dealer (see chapter Accessories). The AV sockets can process different signal types.
Reference ID 40-55 User guide External devices Connecting a DVD recorder to the TV set Devices on AVS A DVD recorder has been selected in the System settings טConnections טAV connecting settings טDevice at connection AV. Switch off all devices before connecting them. Connect the Scart output of the DVD player to the TV set’s AV socket using the Scart adaptor (1 . Use a fully equipped Scart cable (available from your dealer) for this.
Reference ID 40-55 User guide External devices Connecting PC / Set-top box Playback from the device You can connect a PC and thus use the TV screen as a monitor. Call AV list. When connecting a PC or auxiliary device to the AVS socket of the TV set, adjust the output signal on your PC first so that it matches one of the signals in the table in chapter Technical data, section Signals via AVS (PC IN) / HDMI. Switch off all devices before connecting them.
Reference ID 40-55 User guide External devices Connecting the Loewe speaker system Connection Switch off all devices before connecting them. Set-up The arrangement of speakers and TV set can look like the illustration below: Front links Front rechts The subwoofer is connected to the TV set via the DIGITAL AUDIO LINK interface. Plug a network cable (Category 5e or higher) to the DIGITAL AUDIO LINK port of the TV set.
Reference ID 40-55 User guide External devices Connecting active loudspeakers Connecting the HiFi/AV amplifier If you want to use another similar speaker system or active speakers, you can connect these to the AUDIO LINK port of the TV set using an adaptor cable. Connecting digital HiFi/AV amplifiers Plug a network cable (Category 5e or higher) to the AUDIO LINK port of the TV set. Connect the Ethernet cable to the RJ45 socket of the Digital Audiolink / Audiolink converter available as accessory.
Reference ID 40-55 User guide External devices Connecting an external digital sound device (e.g., CD player) Audio playback from external devices Connect external AV devices (e.g., MP3 player, DVD player) for sound reproduction to the AV inputs of the TV set. Connect the digital sound output (Cinch/RCA socket) of the player to the SPDIF IN socket of the TV set. TV-Gerät Connecting an external appliance (e.g.
Reference ID 40-55 User guide External devices Operating Loewe units Setting the remote control for other Loewe devices Using the remote control for the TV mode of the TV set You can operate various Loewe devices with the remote control. The device keys STB – VIDEO – AUDIO can be reassigned to operate different Loewe devices. Press the TV key, the LED above it will light for approx. 5 seconds. Press the required device key and the STOP key simultaneously for 5 sec.
Reference ID 40-55 User guide Teaching the remote control Teaching the remote control Teaching individual keys By means of key code 18 (Set-Top Box data base) your remote control Assist may be taught for your Set-Top Box (e.g., decoder, external cable tuner). Thus, you spare yourself the use of several remote controls. All keys (except the TV, STB, VIDEO and AUDIO device keys as well as the V+/- keys and ) can be taught for the operation of units which are not contained in the integrated data base.
Reference ID 40-55 User guide Teaching the remote control / Loewe Apps Deleting individual key functions You can delete the taught function of an individual button. Press STB and green key simultaneously for five seconds. The LED above the STB key lights up permanently. Press key to be deleted on the TV remote control. The LED above the STB key flashes twice. Continue with the deletion of other buttons as described above. To end the deletion mode, press the STB key again.
Reference ID 40-55 User guide Loewe Apps Overview of the prerequisites for the use of the Assist Media app for the Apple iPad 1. WLAN router and home network 5. Creating an Apple ID If it has not been done yet, create a user account (Apple ID) on your iPad in the Settings under item iTunes & App Stores. A WLAN router must be connected and installed. 2.
Reference ID 40-55 User guide Loewe Apps 6. Install Loewe Assist Media App Open the App Store. 7. Install the Assist Media App Activate the location services for the apps Assist Media and Maps in your iPad under Settings טData protection טLocation service. This is essential for using country-specific functions. Thus, you can use the maxdome video service, for example. Enter the keyword Loewe in the browse list on the right above. Start searching by pressing on Search.
Reference ID 40-55 User guide Troubleshooting Problem Possible cause The TV set switches off automatically. The automatic shutdown switches off the Using automatic shutdown is recommended TV set to save energy after 4 hours of inacti- for the purposes of energy saving and safety. vity as soon as at least one signal input group is set up in the energy efficient mode Home Mode. All menus are displayed in the wrong langu- The menu language was set incorrectly. age.
Reference ID 40-55 User guide Troubleshooting Problem Possible cause Remedy / Instructions Despite video or music file being played back, a) The TV set is set to mute or the volume has a) Increase the volume by pressing the V+ key on the remote control for a longer time. This no sound can be heard. been turned down too much. will also cancel any mute setting. b) An audio device that does not exist or that b) Connect the audio device and switch it on.
Reference ID 40-55 User guide Technical Data Technical data Type Reference ID 55 Reference ID 46 Reference ID 40 Part number 52424xxx 52422xxx 52421xxx Device dimensions without stand (W x H x D) 126,4 x 105,3 x 7,3 107,0 x 94,4 x 7,3 93,8 x 87,1 x 7,3 Weight without stand (approximate) 45,5 36,5 30,5 Display technology Full HD LCD with edge LED backlight technology Screen diagonal / Picture format 140 cm/ 16:9 Resolution / Motion Response 117 cm / 16:9 101 cm / 16:9 1920 x 1080 /
Reference ID 40-55 User guide Technical Data Function of the connections The following table shows the name, type and function of the ports. Designation Type Function / Signal Mains socket 220-240 V ~ 50 / 60 Hz Supply voltage RJ12 Data I/O: serial interface Mini-DIN Rotating stand control (Positioning accuracy 1.5°) Jack 3.5 mm Connection for IR station Jack 3.5 mm Audio OUT: Cinch (black) Audio IN: max.
Reference ID 40-55 User guide Technical Data Media File formats supported Pictures: JPEG, PNG Audio: MP3, M4A (AAC LC), WMA (without lossless), FLAC, WAV (PCM) Video: AVI (MPEG-1/2, XviD, AC3, MP3), WMV (WMV9, VC-1, WMA9, WMA Pro), MP4 (XviD, H.264/MPEG-4 AVC, AAC LC), MOV (H.264/MPEG-4 AVC, AAC LC), MKV (H.264/ MPEG-4 AVC, AC3), FLV (H.264/MPEG-4 AVC, H.263, MP3, AAC LC), MPG (MPEG-1, MPEG Audio), TS/PS (MPEG-2, H.264/MPEG-4 AVC, MPEG2 Audio, AC3), VOB (MPEG-2, MPEG2 Audio, AC3) H.
Reference ID 40-55 User guide Technical Data Signals via AVS (PC IN) / HDMI Signal input groups The following table lists the compatible signals which your TV set can show via the AVS (PC IN) connection or via the HDMI connections (HDMI1, HDMI2, HDMI3, HDMI4). In your TV set the signals are sorted in various signal input groups according to their source. In addition to the source, the type of signal is also distinguished.
Reference ID 40-55 User guide Accessories Accessories The following accessories are obtainable from your Loewe dealer. Mounting options: Various options are available for mounting your TV set on the floor and wall. You will find an overview of the available mounting options in chapter Accessories, section Mounting options. Upgrade kits / conversion kits / cables USB extension (part no.
Reference ID 40-55 User guide Accessories Equipment variants The equipment of the individual set variants and their upgrade/conversion possibilities is listed in the table below.
Reference ID 40-55 User guide Accessories Mounting options Wall Mount Isoflex Reference ID 40-55 Floor Stand Reference ID 40-55 Floor Stand Reference ID 40-55 Dynamic Floor Wall Mount Kit 147
Reference ID 40-55 User guide Environment / Legal information Environmental protection Licences Energy consumption Manufactured under licence from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see chapter Technical Data). If you want to save even more energy then switch the device off with the mains switch.
Reference ID 40-55 User guide Glossary 0-9 24p motion picture display: Movies released on Blu-ray Disc support the 24p motion picture display. The Blu-ray player transfers the original film format to the television with 24 frames per second. The DMM (DigitalMovieMode) set in the factory calculates and inserts additional intermediate pictures, which suppress film jerking typical for the cinema, thereby providing for a smooth motion sequence. A Accurate Recording: See Automatic time control.
Reference ID 40-55 User guide Glossary D (continued) I DVB-C/-S/-T: Digital Video Broadcasting stands for digital television. Technical DVB is the standardised process for transmitting digital content (television, radio, multi-channel audio, room sound, EPG, Teletext, and other supplemental services) through digital technology. CST for terrestrial or antenna distribution. ID3 tags: Additional information for MP3 and WMA audio files.
Reference ID 40-55 User guide Glossary N NAS: The term describes a hard disk which is independently linked to the network (i.e. without a PC). Network ID: NID refers to the so-called programme ID number, also known as network ID – a number between 0 and 8191. This specification is necessary in specific cable networks of some countries. Then only DVB signals of this station network are searched for.
Reference ID 40-55 User guide Glossary Y Ycc/Ypp: Colour standards for Set-top boxes.. YCbCr: Digital colour model, informally also incorrect designation for signals in standard resolution (SDTV). The YCbCr colour model, in which, e.g., DVDs are coded, has been developed from the YUV colour model used in analogue television technology. With YCbCr, the data is transferred via digital interfaces such as DVI or HDMI without being converted. YPbPr: Analogue colour model, see also Component connection.
Reference ID 40-55 User guide EC Declaration of Conformity Ɍɨɡɢ ɭɪɟɞ ɨɬɝɨɜɚɪɹ ɧɚ ɨɫɧɨɜɧɢɬɟ ɢɡɢɫɤɜɚɧɢɹ ɢ ɪɚɡɲɢɪɟɧɢɬɟ ɫɴɨɬɜɟɬɧɢ ɩɪɟɞɩɨɫɬɚɜɤɢ Ⱦɢɪɟɤɬɢɜɚ ȿɋ Ɋɚɡɪɟɲɟɧɨ ɟ ɢɡɩɨɥɡɜɚɧɟɬɨ ɦɭ ɜɴɜ ɜɫɢɱɤɢ ɞɴɪɠɚɜɢ ɨɬ ȿɋ ɢ ɨɫɜɟɧ ɬɨɜɚ ɜ ɂɫɥɚɧɞɢɹ ɇɨɪɜɟɝɢɹ ɢ ɒɜɟɣɰɚɪɢɹ ȼɴɜ Ɏɪɚɧɰɢɹ ɢ ɂɬɚɥɢɹ ɢɡɩɨɥɡɜɚɧɟɬɨ ɦɭ ɟ ɪɚɡɪɟɲɟɧɨ ɫɚɦɨ ɜ ɡɚɬɜɨɪɟɧɢ ɩɨɦɟɳɟɧɢɹ. 7RWR ]DĜt]HQt MH Y VRXODGX VH ]iNODGQtPL SRåDGDYN\ D RVWDWQtPL RGSRYtGDMtFtPL XVWDQRYHQtPL 6PČUQLFH (*.
Reference ID 40-55 User guide EC Declaration of Conformity 154
Reference ID 40-55 User guide Index 0-9 3D ..................................................................................................... 83 3D function ...................................................................................... 85 3D mode .......................................................................................... 85 A Access code .....................................................................................97 Accurate Recording ....................................
Reference ID 40-55 User guide Index H N Hard disks ....................................................................................... 113 Checking ..................................................................................... 113 Formatting .................................................................................. 113 HbbTV .............................................................................................. 43 HbbTV text ....................................................
Reference ID 40-55 User guide Index S Safety ............................................................................................. 6, 7 Satellite selection ......................................................... 25, 26, 27, 28 Satellite system ................................................................................24 Scope of delivery ................................................................................5 Scrambled stations ................................................
Reference ID 40-55 User guide Service Loewe Austria GmbH Parkring 12 1010 Wien, Österreich Tel +43 - 810 0810 24 Fax +43 - 1 22 88 633 - 90 E-mail: loewe@loewe.co.at Loewe France SAS Rue du Dépôt, 13 Parc de l l‘Europe, BP 10010 67014 Strasbourg Cédex, France Tel +33 - 3- 88 79 72 50 Fax +33 - 3- 88 79 72 59 E-mail: loewe.france@loewe-fr.com Audio Products Group Pty Ltd 67 O’Riordan St Alexandria NSW 2015, Australia Tel +61 - 1300 130 492 Fax +61 - 02 9578 0140 E-mail: help@audioproducts.com.
Reference ID 40-55 User guide Code page STB ABSAT AEGIR AIWA AKAI ALBA 166, 169 179 141 033, 104 060, 017, 067, 104, 111, 126, 180, 201 ALCATEL 336 ALDES 133, 168, 179, 201 ALLSAT 033, 048, 059, 077, 201 ALLSONIC 133, 168, 226 ALLTECH 060, 137, 225 ALPHA 033 ALTAI 047 AMITRONICA 060 AMPERE 047, 186, 207 AMSTRAD 060, 006, 047, 071, 097, 132, 165, 174, 175, 186, 212, 216, 217, 227, 228 ANGLO 060 ANKARO 060, 051, 133, 161, 162, 168, 226 ANTTRON 017, 077, 180 APOLLO 017 ARCON 025, 051, 079, 132, 136, 161 AR
Reference ID 40-55 User guide Code page OPTIMA 133 OPTUS 332 ORBIT 025, 194 ORBITECH 006, 017, 103, 169, 181, 224 ORIGO 126, 221 OSAT 097 OTTO VERSAND 090 OXFORD 104 PACE 001, 022, 044, 048, 050, 067, 077, 098, 108, 124, 189, 202, 227, 242, 252, 253, 319, 347 PACIFIC 225 PACKSAT 171, 172 PALCOM 092 PALLADIUM 003, 006, 017, 175 PALSAT 006 PANASAT 235, 254 PANASONIC 031, 067, 124, 227 PANDA 021, 048, 067, 164, 176, 210 PATRIOT 104 PHILIPS 026, 003, 033, 037, 051, 067, 077, 124, 128, 144, 156, 161, 162, 169
Reference ID 40-55 User guide Notes 161
Reference ID 40-55 User guide Notes 162
