Operating instructions TV 3 3 2 4 7 0 2 3 233–33247.
Contents Remote control – TV functions................................................................. 3 Control unit front side of the device........................................................ 4 Connections rear side of the device – Compose 40................................. 5 Connections rear side of the device – Compose 46 / Compose 52.......... 6 Welcome.................................................................................................... 7 Scope of delivery.........................
Remote control – TV functions (page 20).............................................................. Sound off/on (page 62)..................... LED display for current operating mode Switch on/off – to standby mode...................................................(page 12) (page 11; 62)....................................... Switch over to TV mode Switch over to radio mode (1...............................(page 12; 34) (page 62).................................
Control unit front side of the device Button M: Call the menu in the menu: up/down The mains switch is located on the bottom of the TV On/Off button: Switch on from the standby mode Switch off to the standby mode Button – : Station down in the menu: to the left Button R: Radio on/off (back to TV mode) Switch on the radio from the standby mode in the menu: down (1 DR+ Display: = Standby = Operation = Operation without on-screen display (Radio, EPG data capture or timer recording) Button +: Station
Connections rear side of the device – Compose 40 Factory settings: AV1: DVD player AV2: DVD recorder You can change this during the initial installation (page 12) or in the connection wizard (page 40). Before you connect other devices or make any changes, please start the connection wizard (page 40) and the sound components wizard (page 47), and then follow the instructions that are displayed on the TV set.
Connections rear side of the device – Compose 46 / Compose 52 Factory settings: AV1: DVD player AV2: DVD recorder You can change this during the initial installation (page 12) or in the connection wizard (page 40). Before you connect other devices or make any changes, please start the connection wizard (page 40) and the sound components wizard (page 47), and then follow the instructions that are displayed on the TV set.
Welcome Thank you! About this operating manual At Loewe, we combine the highest standards of technology, design and user friendliness. This applies equally for TV, video and accessories. For many questions concerning the technology you will find an answer in the index of your TV set. If your question concerns TV set operation, you can access a function directly from the index of the TV set. Owing to this possibility, this operating manual only explains the most important operating steps.
Welcome Operating convenience with wizards This TV set offers user prompting with wizards that take you through the settings step-by-step. You can return to the previous step or exit the wizard at any time. The wizards in overview Initial installation The initial installation wizard helps you with the initial installation and connection of any existing equipment (see page 12). Setting up the antenna You enter in the antenna wizard which antenna signals are available to you.
For your safety For your own safety and to prevent unnecessary damage to your device, read and comply with the following safety instructions: Proper use and environmental conditions This TV set is designed exclusively for reception and reproduction of video and audio signals and is designed for living rooms or office facilities, and should not be operated in rooms with high humidity, such as a bathroom, or sauna, or where there is a high concentration of dust (e.g. workshops).
For your safety Environmental protection Repairs and accessories Energy consumption Your TV set is equipped with an eco-standby power supply. In the standby mode, the power consumption drops to low power (see Technical data on page 67). If you want to save even more energy then switch the device off with the mains switch. However note that in this case, EPG (Electronic Programme Guide) data will be lost, and it may be that programmed timer recordings cannot be executed via the TV device.
Initial installation Installing the TV set Connecting the TV set First prepare the chosen installation solution for your TV set. See the installation instructions of the wallmount supplied. See Accessories (page 69) for other installation possibilities. Connecting to the mains Preparing the remote control unit Remove the cover for the connections. Inserting or replacing batteries Press the embossed arrow and push down the battery compartment cover.
Initial installation Turning the set on/off First installation wizard Switching the TV set to standby mode First installation after switching on for the first time This wizard starts automatically after the set is switched on for the first time, however it can also be called later manually in the TV index, see Repeat initial installation on page 16. Activate the mains switch on the bottom left of the set.
Initial installation Explanations of the setting possibilities: Location Select the country for country-specific pre-settings. of TV set If UK or IRL is selected for the location of TV set, it is possible to activate MHEG-5 (UK Freeview) for the TV set. A dialogue appears, where you can confirm to set the operating software to the selected location. If Yes is selected and confirmed with OK, the TV set turns off and on again automatically.
Initial installation Digital Link If you have registered and connected a recorder in the Plus connection wizard, the Digital Link Plus transmission begins at the end of the sound components wizard. If a Digital Link Plus capable recorder is connected, the station list of the analogue stations is transmitted to the external recorder. You can also call Digital Link Plus under TV menu → Connections → Digital Link Plus.
Operating convenience General information on menu operation The info display Menus for the individual operating modes (TV, Radio, PIP, EPG, Teletext, PhotoViewer, MusicBox and DR archive) are called with the MENU button. Other menus can be opened with other buttons on the remote control. The menus are displayed at the bottom of the screen. At the top you get additional information about the selected menu item (see info display on the right).
Operating convenience The index in the TV set The Assist+ menu You can start all wizards and many operating functions directly from this point. The complete function scope of the TV set can thus be easily understood. Alphabetic sorting is preceded by the items Language, Integrated features and Repeat initial installation. The most important additional functions of the TV set can be called directly with the Assist+ menu. Open Assist+ Call Assist+ menu. 56S elect additional function, OK calls the function.
Operating convenience TV menu – Overview diagram TV menu Picture adjustment Contrast Colour intensity Colour temperature Brightness Sharpness Digital Noise Control (DNC) more... Image+ Picture format Move picture up/down (3 Auto format Film quality improvement (DMM) Automatic dimmer Recording (7 Sound Picture Sound mode Dolby PLII mode (9 Sound adjustment Headphone volume Loudness more...
Daily operation Select station With the station list ➠ I n normal TV operation, without further displays, no favourites selected: With the keys P+ and P– on the remote control P+/P– Station up/down. The station display with sound identification is displayed briefly. ➠ I f favourites are selected, the station is switched over in the favourites list with P+/P– (see page 19). ➠ T he symbols for the sound identification are described on page 23.
Daily operation With the favourites lists Select video source You can save and call your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list are already stored in the first list. Change the favourites list to suit your requirements (see Put together / change favourites lists on page 27).
Daily operation Adjusting the sound Explanations of the sound settings: Switching sound off/on Sound off; Sound on: Press button again or set volume V+. Setting the volume V+/V– Volume louder / quieter. The volume bar will be shown briefly if no other menu is displayed. Setting the sound mode Call Sound mode. Sound mode optimal ... (5) 4 3 2 1 34Select the number of speakers you want to hear.
Picture Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format. Daily operation Adjusting the picture Picture adjustment Here, you can switch between the preset standard values for contrast, colour intensity, colour temperature, brightness, focus and digital noise reduction and your own personal values. Each of the signal input groups „TV analogue“, „TV digital“, „HD analogue“, „HD digital“, „PC“ and „PhotoViewer“ has its own values.
Daily operation Button functions Selecting the picture format Every operating mode of the TV set (TV, Radio, Teletext, EPG, PIP, PhotoViewer, MusicBox and DR archive) has its own menu and own functions for the coloured buttons. The function of the coloured buttons is shown at the bottom of the menus and wizards. Below, some of the function are listed which you need in TV mode for the daily handling of your TV set.
Daily operation Status display ➠ In normal TV mode, without other displays. END: Show / hide status display. For MHEG-5, INFO button. 1 Das Erste 14:30 - 15:15 Toskana Language-/sound selection 14:42 Alarm time 20:00 Digital (5) Sleep timer 23:00 You will see the number and name of the station, the title of the current broadcast (if available) and the sound identification in the top two lines. The bar (if available) indicates the progress of the current programme.
Managing stations TV stations Explanations of some search settings: Various options for managing stations are available via the TV menu. For example the description for TV stations. For radio stations the same applies, except that the radio menu is called in radio mode (see also page 34). ➠ Station management is not possible if a programmed timer recording is still pending.
Managing stations Search for/update stations – handling of new and no longer found stations The number of new stations found is displayed after the automatic search/update has been completed. Search wizard All stations marked with a are saved. Note: The newly found stations which you have already deleted are not marked.
Managing stations Rename station Change, delete, move, rename, restore stations ➠ Change stations can also be called via the station list (page 18). Call TV menu. 34Select Settings, 6 go to the menu line below. Blue button: Starts Rename station. Under the 1st letter of the name you will see a line indicating the current input position. I nput position one character to the right (also for blanks). I nput position one character to the left (deletes the character).
Managing stations Put together / change favourites lists Add station to favourites list Each favourites list can contain up to 99 stations. You can put together the favourites lists to suit your requirements (e.g. topic lists). Other persons using this TV set can create their own favourites lists. The favourites lists also have the advantage that the stations of different signal sources can be stored in the order you wish. ➠C hange favourites can also be called via the favourites list (page 19).
Picture in Picture Picture in Picture (PIP) Swap contents of PIP and main picture The concurrent display of two different images is referred to as Picture in Picture. ➠ T he frame is green, if not, press the green button. ➠ The coloured buttons do not work as described below for TV sets with MHEG-5 software, but they operate as described on page 33 (Digital Teletext). ➠ A concurrent representation of two HDTV signals is not possible. ➠ A concurrent representation of two coded stations is not possible.
Picture in Picture Configure Picture in Picture (PIP) mode Change position of the PIP small picture ➠ Other than the status line, which may possibly be displayed, no other display is shown on the screen: In the PIP menu you can set the PIP type (Split Screen or Small PIP), the PIP function (Standard PIP or iPIP) and the position of the small picture. Start PIP menu ➠ P IP mode started, if not, press PIP button. ➠ T he frame is green, if not, press the green button. Call PIP menu.
Electronic Programme Guide Electronic Programme Guide – EPG Adjusting the programme list EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed programme guide, you can learn about the current programme. In addition programmes can be sorted according to certain topics, memorised, and also recordings can be programmed. ➠ T he selection is at the top of the specifications, if not, press the blue button.
Electronic Programme Guide Calling additional information about the programmes ➠ Brief information about many programmes is displayed below the programme list of the broadcasts. You can call detailed information with the TEXT button if this function is offered by the TEXT icon in the lower left. Programming a recording for a recorder ➠ T he selection is in the lower programme list, if not, press the blue button. 65Mark the desired programme. Red button: Starts recording wizard.
Teletext Teletext Additional page selection possibilities Your TV set supports the two operating systems TOP Text and FLOF. Up to 2,000 pages are stored so that you have quick access. 1st possibility: Call overview page 100. Starting and ending Teletext 2nd possibility: Directly enter the page number. Switch Teletext on / off. 100 100 ARDtext Do 07. 09. 06 14 : 14 : 42 100 ARD Text Politik: Die neuen Gesetzesentwürfe Wird auch der Nahverkehr teurer? . . Australien: Keine Zugeständnisse . .
Teletext Programming timer recordings via Teletext ➠ T eletext is started, if not, press the TEXT button. Explanations of the Teletext menu functions: Recording wizard Call the programme pages of the current station. Green button: Go to the appropriate page. 65Select the desired programme, OK to programme the recording. Change the appropriate recording data in the following menu Timer data if necessary (see also page 54, "The direct way to record").
Radio Radio mode Switching the screen on/off Red button: Switch off the screen. You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs. ➠ For TV sets with MHEG-5 software, the buttons may be configured differently by the provider. Switch on the screen with the remote control: Red button, OK button or RADIO button.
DVB Conditional Access module (CA module) In order to receive coded digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set (see page 5 and 6). The CA module and the Smart Card are not part of the TV set's scope of delivery. They are usually available from your dealer. Loewe does not provide any guarantee for the functioning of the CA module.
DVB Software update TV base software and DVB software Your TV set provides the option to update the TV basic and DVB software. The current software versions can be installed on your set with a USB stick. Contact your dealer for a software update by USB stick. The software can also be updated by different DVB reception paths (DVBT, DVB-C, DVB-S). However, the prerequisite for this is that the software is provided by the appropriate DVB reception path.
DVB If you have adapted the update settings: OK proceed. A bar informs you about the progress of the charging process. Do not switch your set off during this time! 34Select Start update, OK start update procedure. This process can take up to 20 minutes depending on the selected update source. You will be informed at the end. Software update wizard Current TV base software: Current DVB software: At the end of charging: Switch the TV set off and back on with the mains switch.
Other settings Parental lock Timer functions You can select and set various security options to prevent unauthorised use of the TV set and to protect your children from unsuitable programmes. This menu offers you convenient alarm services. Programmed alarms are also active when the TV set has been switched off to standby. If the TV set switches on from the standby mode by alarm, a screen message appears.
Other settings On-screen displays Time and date You can select different settings in this menu which affect the on-screen displays. If you receive a station with teletext after switching on the TV, the time and date are recorded automatically. The date may have to be entered manually for some stations. Enter the time and date manually if you receive station without teletext. Call On-screen displays Call TV menu. 34Select Settings, 6 go to the menu line below.
Operating additional equipment Connection wizard Select the equipment you want to connect or remove equipment you no longer use in the AV equipment selection. The connection wizard serves to connect accessory equipment optimally to the TV set, make changes to the wiring of the devices or remove momentarily logged in equipment. The exact process of the wizard depends on the choice of equipment. ➠N ew equipment should not be connected until it has been logged in in the Connection wizard first.
Operating additional equipment Signal type New devices/modifications Signal type at socket AV1 (DVD) Automatic CVBS/YC CVBS YC OK Proceed Digital Link Plus OK END 56 Select the signal types of the individual devices one after another where necessary. Normally you should leave the setting on Automatic CVBS/YC (e.g. for DVD player/recorder) or Autom.VHS/SVHS (e.g. VCR), otherwise select the suitable signal type. OK Proceed.
Operating additional equipment Devices to the connections AV1/AV2/AVS Connecting a DVD player to the TV set ➠D VD player is registered with the connection wizard. Accessory equipment such as DVD players, video and DVD recorders etc. can be connected to the TV set at the Euro-AV sockets AV1 and AV2 (see pages 5 and 6). The AV input AVS (see pages 5 and 6) offers the possibility of connecting a digital camera or a camcorder for example. Switch off all equipment before connecting.
Operating additional equipment Connecting a DVD recorder to the TV set Connecting Camcorder/camera ➠ DVD recorder is registered with the connection wizard. ➠C amcorder/camera is registered with the connection wizard. Switch off all equipment before connecting. Switch off all equipment before connecting. Connect the Euro-AV output of the DVD recorder to the AV2 socket of the TV set. Use a fully equipped Euro-AV cable (available from your dealer) for this.
Operating additional equipment Devices to the HDMI (DVI) connections Playback from the device The HDMI connections (High Definition Multimedia Interface) allow the transmission of digital video and audio signals from a player, e.g. DVD player, DVD recorder, Blu-ray player, game console or Set-Top-Box via a single cable. The digital video and audio data are transmitted without data compression digitally and therefore lose none of their quality.
Operating additional equipment Devices to the PC IN connection Playback from the device You can connect a PC to the PC IN socket for example and thus use the TV screen as a monitor. ➠W hen connecting a PC or accessory equipment to the PC IN socket of the TV set, set one of the following screen resolutions on the PC / accessory equipment first.
Operating additional equipment Devices to the Component IN connection Playback from the device DVD players/recorders or a Set-Top-Box with Component Video connections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-COMPONENT) of the TV set instead of to the EURO-AV sockets. The connecting cable with three cinch plugs each transfers the picture information with a better quality than a EURO-AV cable. You need another cable for the sound transmission. Connecting the device ➠D evice to COMP.
Operating additional equipment Sound components wizard TV speakers The sound components wizard helps you to configure the components used to play the TV sound. Depending on what you want to use, active speakers, speaker systems, Loewe Individual Sound Projector and analogue and digital HiFi/AV amplifiers can be configured. The sound components wizard is preset to playback via TV speakers at the factory.
Operating additional equipment Speaker system Loewe Individual Sound on the Dolby Digital Decoder of the TV set Setup The arrangement of speakers and TV set can look like the illustration below: The front and surround speakers should be installed symmetrically to the TV set and to your sitting position. You can place the subwoofer anywhere on the floor. We recommend placing it in front asymmetrically next to the TV set. If a centre speaker is used, it should be placed centrally below the TV set.
Operating additional equipment Connecting other speaker systems or active speakers to the Dolby Digital Decoder If you want to use another similar speaker system or active speakers, you can connect these to the AUDIO LINK interface of the TV set with an adapter cable. A comparable speaker system is connected in a similar way to that described above for "subwoofer without AUDIO LINK interface". The adapter cable is available from your dealer (see Accessories, page 68).
Operating additional equipment If you want to set up or change a speaker system: ➠ S elect the start value of the frequency response of the speakers for the right setting (e.g. 50Hz for the specification "Frequency response 50-20.000Hz"). See the technical data of the speakers for the value. 34Select Configuration/modification, OK call selection.
Operating additional equipment OK continue to set the Distance to left front speaker. OK continue to Subwoofer phase. ➠M easure the distances from your listening position to the front, surround, and centre speakers respectively. The Dolby Digital Decoder calculates the delay times for the speaker signals from these so that they reach the listener simultaneously. Sound components wizard Please enter the distance of the left front speaker from your listening position here.
Operating additional equipment Connecting audio amplifiers Connecting digital audio amplifiers The sound components wizard permits configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). See the operating manual of the audio amplifier for more information. Call TV menu. Continuation of the left column above ... For digital audio transmission: Select yes.
Operating additional equipment Assignment of the digital audio input TV set In order to be able to hear the digital sound of an external device connected to an AV input, an AV input can be assigned to the digital audio input socket AUDIO DIGITAL IN. When switching to this AV input, the digital audio signal applied to the AUDIO DIGITAL IN input is passed on to the integrated Dolby Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT.
Operating additional equipment The direct way to record You can programme timer recordings via the integrated Digital Recorder or connected recorders on the TV set. The recording wizard is integrated at several places for programming a recording. Further information about recording with the Digital Recorder can be found in a separate operating manual. Programming a timer recording with the EPG ➠Y ou are in EPG mode; if not, press the EPG button.
Operating additional equipment Timer recording with external devices Programming the timer with the timer overview A timer recording can also be programmed manually. ➠ I t is not possible to record HDTV broadcasts with external devices. Use the internal Digital Recorder for this. Call Timer list. You see a list of all previously programmed timers: Timer list Mon 14.09. Wed 16.09. Thu 22.09.
Operating additional equipment PhotoViewer You can view photos in the standard JPEG format stored on a USB stick or a memory card in a card reader. You can also collect photos in a slide show. Viewing photos ➠ The photo overview is displayed. Folder_1 Connecting OK ➠C ertain USB memory media may not be supported by this set under some circumstances. Plug a card reader (via a USB cable) or a USB stick into the USB port on the TV set (see pages 5 and 6).
Operating additional equipment Open folder ➠ Folders will only be displayed if they were created on the memory card / USB stick. Calling the PhotoViewer menu In the PhotoViewer menu you can make picture settings and select the memory medium. ➠ The photo overview is displayed. 5634Mark a folder in the photo overview. OK Open folder. The photos in this folder are displayed. Call PhotoViewer menu.
Operating additional equipment MusicBox You can play music files in MP3 format which are saved on a USB stick or a memory card in a card reader. You can also collect the music titles in play lists. Connection ➠C ertain USB memory media may not be supported by this device. ➠Y our memory medium should not exceed a total capacity of 8 GB. Larger memory media may not be supported. The read-in time of the memory medium depends on the stored data volume. ➠ T he file names must have the extension ".mp3".
Operating additional equipment Functions of the control buttons Sort according to artists MusicBox STOP button: Once: resume stop, twice: stop. Savatage Sido Sinatra Frank Starship Steel Pulse System Of A Down Texas Lightning Thin Lizzy PLAY button: After resume stop: Continue playing at place where playback was interrupted. After stop: Start playing the first title according to the set sorting. For playback: Start the current title from the beginning. For pause: Continue playback.
Operating additional equipment MusicBox – Play lists Create new play list / add title You can save and call your music titles in play lists. Change and create play lists as you like. The play lists are created on the memory medium in the common M3U format for simple exchange with the PC. Call / play play list ➠ The play list overview is displayed. ➠ List selection (left column) must be selected. If not, change the column with 3. Blue button: Call Create play list. A new empty play list is created.
Operating additional equipment Rename play lists ➠ P lay list (right column) must be selected. If not, change column with4. Blue button: Starts Rename play list. Numeric buttons: Enter new name (same procedure as for rename station, see page 26). OK Save new name. Move titles in the play lists / change order ➠ Play list (right column) must be selected. 56Mark title to be moved. Yellow button: Starts Move title. 56S elect insertion position at which the marked title is to be inserted. OK Move title.
Operating additional equipment Operating Loewe equipment Using the remote control for the TV mode of the TV set Press the TV button, the display above it will light for approx. 5 seconds. Using the remote control for a recorder Press the REC button, the display above it will light for approx. 5 seconds. 1 2 3 4 5 6 17 18 19 20 Using the remote control for a DVD player 21 Press the DVD button, the display above it will light for approx. 5 seconds.
Operating additional equipment Functions for the Loewe DVD player (Auro 2216 PS, 8116 DT) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Sound off/on LED indicator for current operating mode Switch over to operate TV set Switch over to operate Recorder Sleep timer Set TV picture format; RADIO: Mono/Stereo DISC: Repeat; RADIO: display RDS name/frequency of station DISC: User interface of loaded DVD Show/hide menu; MENU: close window V–/V+ Volume down/up DISC: Titl
Operating additional equipment Rotating the TV set Your TV set has a connection for a rotating stand control. If the set is mounted on a motorised Loewe stand, you can use the remote control to adjust it to your seating location accordingly. Call TV menu. ➠ A motor unit is connected. ➠ In normal TV mode, without other displays. 34Select Settings, 6 go to the menu line below. 34 Rotate the TV set.
Troubleshooting Problem Possible cause Remedy All menus are displayed in the wrong language. The menu language was set incorrectly. Set the menu language: Press the INFO button in TV mode (Index). Mark the first key word and call it with OK. Then select the language and confirm it with OK. In the TV menu, Connections cannot be called (displayed in grey). A timer recording is in progress. Wait until the timer recording ends or delete the timer recording (page 55).
Troubleshooting Problem Possible cause Remedy Digital Link Plus does not work. a) EURO-AV cable is not fully wired (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. a) Replace the EURO-AV cable. With Teletext various character sets are displayed incorrectly. The wrong character set has been set in the Teletext menu. Set the right character set: Select Teletext menu → Settings → Character set → Standard or the appropriate character set.
Technical data General data Type Article number Device dimensions without base (W x H x D) in cm Weight (approximate) in kg Display Picture diagonal in cm/picture format Resolution in pixels Dynamic contrast ratio Static contrast ratio Viewing angle horizontal and vertical Power consumption (EN 62087) in operation (watt) in standby (watt) Ambient temperature (Celsius) Relative humidity (non-condensing) Air pressure Individual 40 Compose Full-HD+ 100 67437xxx 101.4 x 61.7 x 10.3 31.
Accessories Accessories Trim: With your Individual Compose device it is possible to replace the laterally attached trim (panels) to match the ambiance of your home. There are different surface structures or colours that can be selected for your device. Please contact your dealer in this regard. Wood trim is a natural product. In this case UV light (strong sunlight) can cause slight discoloration.
Accessories Setup possibilities Individual 52 Compose Full-HD+ 100 Wall Mount Screen Wall Mount 2 (1 • • • • • Table Stand I 52 Compose Table Stand I 40-46 Compose Individual 46 Compose Full-HD+ 100 • • • • • • • Floor Stand 5 MU SP Center Floor Stand I Compose Screen Floor Stand I 52 MU Screen Floor Stand MU Wall Mount (delivery status) Table Stand I 52 Compose Floor Stand 5 MU SP (2 Center Floor Stand I Compose Screen Floor Stand I 52 MU Wall Mount (delivery status) Screen Wall Mount 2 (1 Table S
Glossary 0-9 24p movie display: Modern movie makers produce movies with 24 (full) pictures per second (24p), conventional TV sets (and most DVDs) show 50 (half) pictures per second. To play the movie, the original number of pictures is doubled and the film sped up. This is optimal for sports broadcasts but for quieter movies it distorts the picture quality. A Active antenna: An antenna with its own power supply or amplification that can improve reception in areas with poor reception.
Glossary F FLOF: Full Level One Facilities. Teletext system in which designations and numbers of the jump destinations are transmitted separately for every page on the bottom line. This guides the reader to related topics for example. An information about which pages exist and which pages have sub-pages is not available in FLOF. H HDCP: High-bandwidth Digital Content Protection. Coding system provided for the interfaces DVI and HDMI for protected transmission of audio and video data.
Glossary S Satellite tuner: Receiver for satellite programmes. SDTV: Standard Definition TeleVision. SECAM: French picture standard. Set-Top-Box: Set-Top-Box (STB for short) refers to a device in entertainment electronics which is connected to another device, usually a TV set, and offers the user additional functional options. Signal input groups: Depending on the applied signal, the signal sources are divided into different groups.
Index 0-9 24p format 44 A Access code 38 Active speakers 49 Adjusting the picture 21 Adjusting the sound 20 Alarm 38 Assist+ 8, 16 Audio amplifiers 52 Auro Loewe Preceiver 47 Auto format 21 Automatic dimmer 21 AV audio signal 20 AV selection 19 Display 12 DVB character set 23 DVB software 36 DVD button 62 DVI 44 Muting 20 E Encrypted stations 13, 24, 35 EPG 30 O On-screen displays 39 Overview diagram 17 F Factory settings picture/sound 21 Favorites 19 File folder 57 First installation wizard 12 FLOF 32
Service Loewe Austria GmbH Parkring 12 1010 Wien, Österreich Tel +43 - 1 22 88 633 - 0 Fax +43 - 1 22 88 633 - 90 Email loewe@loewe.co.at Loewe Opta GmbH, Customer Care Center Industriestraße 11 96317 Kronach, Deutschland Tel +49 1801–22256393 Fax +49 9261–99500 Email ccc@loewe.de ISSAGOGIKI EMBORIKI ELLADOS S.A. 321 Mesogion Av. 152 31 Chalandri-Athens, Hellas Tel +30 - 210 672 12 00 Fax +30 - 210 674 02 04 Email christina@bose-onkyo.gr International Dynamics Australasia Pty Ltd.
