Technical Specifications


Loctite® Power Grab® Express Molding & Paneling
Interior Construction Adhesive
Page 2 of 4
Typical Uncured
Physical Properties:
Color: White
Appearance: Thick paste
Base: Synthetic latex
Odor: Minimal
Specific Gravity: 1.31 – 1.35
Density: 10.9 to 11.3 lbs/gal
pH: 7 to 9
Flashpoint: >200°F (93°C)
Viscosity: > 2000 Mcps At 5 rpm
% Solids by Weight: 66.4%
VOC Content: 0.1% by weight CARB
27 g/l SCAQMD rule 1168
Shelf Life: 24 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
Printed on plastic nozzle YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Example: 15061 = 61
st
day of 2015 = March 2, 2015
Typical Application
Properties:
Application Temperature: Apply and cure above 50°F (10°C)
Open Time: 15 minutes* At 77°F (25°C)
Repositioning Time: 15 minutes*
Initial Dry Time: 12 hours* At 77°F (25°C) and 50% RH
Cure Time: Up to 14 days*
*Time is dependent on temperature, humidity, porosity of substrate and amount of adhesive
applied
Initial Tack: 30 g/cm²
Extrusion: 64 lbs At 73°F (23°C)
Typical Cured
Performance Properties:
Color: White
Cured Form: Non-flammable solid
Service Temperature: 0°F (-18°C) to 122°F (50°C)
Water Resistant: Yes when fully cured
Paintable: Yes
Sandable: No
Dry Time vs T-bond
Strength:
2 hours:
4 hours:
8 hours:
12 hours:
16 hours:
24 hours:
3 days:
7 days:
9.2 lbs
19.2 lbs
64.5 lbs
76.3 lbs
77.9 lbs
74.9 lbs
85.9 lbs
77.9 lbs
Wood to Wood
2.25 in² bond area
At room temperature
Shear Strength:
Dry Lumber: 841 ± 96 psi
ASTM D3498