Datasheet

MSDS-No.: 153475
V004.0
Loctite 603
Page 9 of 16
Derived No-Effect Level (DNEL):
Name on list
Application
Area
Route of
Exposure
Health Effect
Exposure
Time
Value
Remarks
Methacrylic acid, monoester with propane-
1,2-diol
27813-02-1
worker
Dermal
Long term
exposure -
systemic effects
4,2 mg/kg bw/day
Methacrylic acid, monoester with propane-
1,2-diol
27813-02-1
worker
inhalation
Long term
exposure -
systemic effects
14,7 mg/m3
Methacrylic acid, monoester with propane-
1,2-diol
27813-02-1
general
population
Dermal
Long term
exposure -
systemic effects
2,5 mg/kg bw/day
Methacrylic acid, monoester with propane-
1,2-diol
27813-02-1
general
population
inhalation
Long term
exposure -
systemic effects
8,8 mg/m3
Methacrylic acid, monoester with propane-
1,2-diol
27813-02-1
general
population
oral
Long term
exposure -
systemic effects
2,5 mg/kg bw/day
Acrylic acid
79-10-7
worker
inhalation
Long term
exposure - local
effects
30 mg/m3
Acrylic acid
79-10-7
worker
inhalation
Acute/short term
exposure - local
effects
30 mg/m3
Acrylic acid
79-10-7
worker
Dermal
Acute/short term
exposure - local
effects
1 mg/cm2
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Use only in well-ventilated areas.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly
ventilated area
Filter type: A
Hand protection:
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30
minutes permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation
time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is based on literature references and on information provided by glove manufacturers, or is derived by
analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be
considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing
factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Eye protection:
Wear protective glasses.
Skin protection:
Wear suitable protective clothing.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
liquid
green
Odor
characteristic
Odour threshold
No data available / Not applicable