Datasheet

MSDS-No.: 422581
V001.5
O-Ring Kit W/Adh 20g 406 DE Page 5 of 8
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance liquid
colourless to
yellowish
Odor irritating
pH No data available / Not applicable
Initial boiling point No data available / Not applicable
Flash point 80 - 93,4 °C (176 - 200.12 °F)
Decomposition temperature No data available / Not applicable
Vapour pressure No data available / Not applicable
Density No data available / Not applicable
Bulk density No data available / Not applicable
Viscosity No data available / Not applicable
Viscosity (kinematic) No data available / Not applicable
Explosive properties No data available / Not applicable
Solubility (qualitative)
(Solvent: Water)
Polymerises in presence of water.
Solidification temperature No data available / Not applicable
Melting point No data available / Not applicable
Flammability No data available / Not applicable
Auto-ignition temperature No data available / Not applicable
Explosive limits No data available / Not applicable
Partition coefficient: n-octanol/water No data available / Not applicable
Evaporation rate No data available / Not applicable
Vapor density No data available / Not applicable
Oxidising properties No data available / Not applicable
9.2. Other information
No data available / Not applicable
SECTION 10: Stability and reactivity
10.1. Reactivity
Rapid exothermic polymerization will occur in the presence of water, amines, alkalis and alcohols.
10.3. Possibility of hazardous reactions
See section reactivity
10.4. Conditions to avoid
Stable under normal conditions of storage and use.
10.5. Incompatible materials
None if used properly.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
General toxicological information:
The preparation is classified based on the conventional method outlined in Article 6(1)(a) of Directive 1999/45/EC. Relevant
available health/ecological information for the substances listed under Section 3 is provided in the following.
Oral toxicity:
Cyanoacrylates are considered to have relatively low toxicity. Acute oral LD50 is >5000mg/kg (rat). It is almost impossible
to swallow as it rapidly polymerises in the mouth.
Inhalative toxicity:
Irritating to respiratory system
Prolonged exposure to high concentrations of vapours may lead to chronic effects in sensitive individuals
In dry atmosphere with < 50% humidity, vapours may irritate the eyes and respiratory system