Technical Specifications

ManualsBrandsLoctite ManualsCaulkPerfect Finish™ Clear Kitchen & Bath Sealant - 9.5 oz.

LOCTITE® PERFECT FINISH

Kitchen & Bath Premium Sealant

Page 1 of 4

Revision: 08/17/2020

Supersedes: NEW

Ref. #:678606 and 678673

Technical Data Sheet

Loctite® Perfect Finish Kitchen & Bath Premium Sealant is formulated for sealing projects where moisture

is most prevalent: kitchens & bathrooms. This easy to use premium sealant is a one part, moisture curing,

solvent free product that provides increased durability for a longer lasting, watertight, mold & mildew

resistant seal. Perfect Finish Kitchen & Bath is resistant to color change and abrasion that may be caused

by harsh chemical cleaners.

Available As:

• Solvent free, silicone free, and water resistant

• Stays permanently flexible, will not shrink or crack over time

• Provides an excellent seal on the widest range of substrates

• Mold and mildew resistant sealant

• Clear formula available for seamless repairs

Loctite® Perfect Finish Kitchen & Bath is suitable for interior projects. It can seal a variety of materials

including tile, ceramic, porcelain, marble, granite, brick, fiberglass, PVC, wood, drywall, concrete &

masonry, most metals including aluminum, stainless steel, copper, brass; and many other surfaces*.

• Do not use below waterline, on mirrors, under shower door tracks, or in aquariums

• Applications requiring temperature resistance greater than 176°F (80°C)

• Maximum joint size is ¼” without backing material

• Do not use on joints immersed in water or applications requiring continuous water immersion

• No adhesion to polyethylene, polypropylene, PTFE (Teflon), PMMA (acrylic glass), and silicone

• Do not use as a traffic bearing sealant or areas subject to foot traffic.

• Not recommended for direct or indirect food contact

For a 9.5-fl. oz. (280 ml) cartridge:

▪ A 1/4” (6 mm) bead extrudes approximately 29.1 ft. (8.9 m)

▪ A 3/8” (9.5 mm) bead extrudes approximately 12.9 ft. (3.9 m)

Item #

Package

Size

Color

2630247

Plastic Cartridge

9.5 fl. oz. (280 mL)

White

2630335

Plastic Cartridge

9.5 fl. oz. (280 mL)

Clear

LIMITATIONS

DESCRIPTION

FEATURES & BENEFITS

RECOMMENDED FOR

Perfect Finish Kitchen & Bath

Premium Sealant

Sealant

COVERAGE

Summary of content (4 pages)

PAGE 1
Technical Data Sheet Revision: 08/17/2020 Supersedes: NEW Ref. #:678606 and 678673 Perfect Finish Kitchen & Bath Premium Sealant Sealant DESCRIPTION Loctite® Perfect Finish Kitchen & Bath Premium Sealant is formulated for sealing projects where moisture is most prevalent: kitchens & bathrooms. This easy to use premium sealant is a one part, moisture curing, solvent free product that provides increased durability for a longer lasting, watertight, mold & mildew resistant seal.
PAGE 2
Technical Data Sheet Typical Uncured Physical Properties: Colors: White, Clear Appearance Revision: 08/17/2020 Supersedes: NEW Ref.
PAGE 3
Technical Data Sheet Revision: 08/17/2020 Supersedes: NEW Ref. #:678606 and 678673 DIRECTIONS General Preparation: The temperature of the product, the surfaces, and the working area should be between 41°F (5°C) and 104°F (4°C). For best performance, store cartridge at room temperature at least 24 hours before use. Cut plastic nub on top of cartridge (be careful not to cut into the threads) then screw on plastic nozzle.
PAGE 4
Technical Data Sheet Revision: 08/17/2020 Supersedes: NEW Ref. #:678606 and 678673 DISCLAIMER The information and recommendations contained herein are based on our research and are believed to be accurate, but no warranty, express or implied, is made or should be inferred. Henkel recommends purchasers/users should test the products to determine acceptable quality and suitability for the intended use.