Technical Specifications


Loctite® 2 in 1™ Seal & Bond
All-Purpose
Page 2 of 4
Typical Uncured
Physical Properties:
Color: White, Black or Almond Note: Clear sealant extrudes white and dries clear
Appearance: Non-slumping paste
Base:
White, Black, Almond:
Clear:
Polyvinyl Acetate (PVA)
Acrylic Latex
Odor:
White, Black, Almond:
Clear:
Sweet
Mild acrylic odor
Specific Gravity:
White, Black, Almond:
Clear:
1.30
1.06
Flash Point:
White, Black, Almond:
Clear:
180°F (82°C)
Not applicable
Viscosity:
White, Black, Almond:
Clear:
White:
Clear:
360,000 to 520,000 cps
250,000 to 350,000 cps
112,000 to 160,000 cps
200,000 to 250,000 cps
For 10 oz cartridge
For 5.5 oz squeeze tube
VOC Content: < 1.5% by weight CARB
< 143 g/l SCAQMD rule 1168
Shelf Life:
White, Black, Almond:
Clear:
18 months from date of manufacture (unopened)
24 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
Cartridge - Stamped on
bottom edge
YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Tube - Stamped on
crimped edge
Example: 14061 = 61st day of 2014 = March 2, 2014
For Best Results:
 Apply and store between 40°F (5°C) and 100°F (38°C)
 Do not apply outdoors if rain or freezing temperatures are expected within 24 hours of application
 Not recommended for continuous water immersion
 Not for use below water line, on mirrors or in aquariums, under shower door tracks or between two non-porous surfaces
 Not for use in butt joint, architectural joints, joints subject to heavy abrasion, wear or tuck pointing
 Maximum joint depth is ¼” (6.3 mm) and joint width is ½” (12.7 mm). Control depth by use of backer rod.
 Do not use on unfinished or unprimed fiber cement (Fiber cement must be primed or have a factory finish before
application)
Coverage:
For a 5.5 fl. oz. (163 ml) squeeze tube:
 A 1/4” (6 mm) bead extrudes approximately 16.9 ft. (5.1 m)
 A 3/8” (9.5 mm) bead extrudes approximately 7.5 ft. (2.3 m)
For a 10 fl. oz. (295 mL) cartridge:
 A 1/4” (6 mm) bead extrudes approximately 30.6 ft. (9.3 m)
 A 3/8” (9.5 mm) bead extrudes approximately 13.8 ft. (4.2 m)