Technical Specifications


Loctite® PL® 400® Subfloor
All Weather Construction Adhesive
Page 2 of 4
Typical Uncured
Physical Properties:
Color: Tan
Appearance: Paste
Base: Latex
Odor: Acrylic
Specific Gravity: 1.335
Viscosity: 200,000 to 600,000 cps
Flashpoint: 104°F (40°C)
VOC Content: 1.5% by weight CARB
50 g/l SCAQMD rule 1168
Shelf Life: 18 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
Stamped on plastic nozzle YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Example: 14061 = 61
st
day of 2014 = March 2, 2014
Typical Application
Properties:
Application Temperature: Apply and cure between 18°F (-8°C) and 120°F (49°C)
For best results, store adhesive at room temperature 24 hours before use
Open Time: 60 minutes* At 78°F and 50% relative humidity
Repositioning Time: 30 minutes* At 78°F and 50% relative humidity
Cure Time: 2 to 7 days*
*Time is dependent on temperature, humidity, porosity of substrate and amount of adhesive
applied
Typical Cured
Performance Properties:
Color: Tan
Cured Form: Non-flammable solid
Service Temperature: -20°F (-29°C) to 150°F (66°C)
Water Resistant: Yes. Do not use outdoors if rain is expected within 24 hours
Shear Strength :
Wet Lumber:
Frozen Lumber
Dry Lumber:
Gap Filling:
Moisture Resistance:
195 psi
125 psi
221 psi
228 psi
100 psi no delamination
ASTM D3498
Specifications:
 ASTM D3498
 American Plywood Association (APA) AFG-01
 Meets performance requirements of HUD UM No.60a





