Technical Specifications


Loctite® 2 in 1™ Seal & Bond
Tub & Tile
Page 2 of 4

Typical Uncured
Physical Properties:
Color: White and Almond Note: Clear product extrudes white and dries clear
Appearance: Lump-free paste
Base:
White, Almond:
Clear:
Polyvinyl Acetate (PVA)
Acrylic Latex
Odor:
White, Almond:
Clear:
Sweet
Mild acrylic odor
Specific Gravity:
White, Almond:
Clear:
1.26
1.06
Flash Point: 155°F (68°C)
VOC Content: < 1.5% by weight CARB
< 143 g/l SCAQMD rule 1168
Shelf Life:
White, Black, Almond:
Clear:
18 months from date of manufacture (unopened)
24 months from date of manufacture (unopened)
Lot Code Explanation: YYDDD
Cartridge - Stamped on
bottom edge
YY= Last two digits of year of manufacture
DDD= Day of manufacture based on 365 days in a year
Tube - Stamped on
crimped edge
Example: 14061 = 61st day of 2014 = March 2, 2014
Typical Application
Properties:
Application Temperature: Apply between 40°F (5°C) and 100°F (38°C)
Skin/Tooling Time: 5 minutes*
Tack-Free Time: 10 to 20 minutes*
Cure Time: 1 to 14 days*
*Times are dependent on temperature, humidity and thickness of sealant applied
Extrusion: 28 lbs (12.7 kg)
Channel Slump: 0 to 0.32 inches (0 to 8 mm) ASTM C 639
Color: White, Clear or Almond
For Best Results:
 Apply and store at temperatures between 40°F (5°C) and 100°F (38°C)
 Not suitable for continuous water immersion
 Not for use under shower door tracks, below water line, on mirrors, in aquariums or on two non-porous surfaces
 Not for use in butt joints, architectural joints, joints subject to heavy abrasion, wear or tuck pointing
 Maximum joint depth is ¼” (6.3 mm) and joint width is ½” (12.7 mm). Control depth by use of backer rod.
 Wait 24 to 48 hours before water exposure after sealant application
Coverage:
For a 5.5 fl. oz. (163 ml) squeeze tube:
 A 1/4” (6 mm) bead extrudes approximately 16.9 ft. (5.1 m)
 A 3/8” (9.5 mm) bead extrudes approximately 7.5 ft. (2.3 m)
For a 10 fl. oz. (295 mL) cartridge:
 A 1/4” (6 mm) bead extrudes approximately 30.6 ft. (9.3 m)
 A 3/8” (9.5 mm) bead extrudes approximately 13.8 ft. (4.2 m)