Safety data sheet

MSDS-No.: 153750
V003.2
LOCTITE LB 8012 LOW FRICTION LUBRICANT known as Moly Paste
Page 3 of 7
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Use only in well-ventilated areas.
Vapours should be extracted to avoid inhalation.
Prolonged or repeated skin contact should be avoided
See advice in section 8
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool, well-ventilated place.
Keep away from heat and direct sunlight.
7.3. Specific end use(s)
Lubricant
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Great Britain
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
Molybdenum disulphide
1317-33-5
[MOLYBDENUM COMPOUNDS (AS
MO), INSOLUBLE COMPOUNDS]
10
Time Weighted Average
(TWA):
EH40 WEL
Molybdenum disulphide
1317-33-5
[MOLYBDENUM COMPOUNDS (AS
MO), INSOLUBLE COMPOUNDS]
20
Short Term Exposure
Limit (STEL):
EH40 WEL
Biological Exposure Indices:
None
8.2. Exposure controls:
Engineering controls:
Ensure good ventilation/extraction.
Respiratory protection:
Ensure adequate ventilation.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly
ventilated area
Filter type: A