Safety data sheet

MSDS-No.: 283439
V003.4
LOCTITE LB 8025 known as Loctite 8025 400ml,En/De/Fr/Nl
Page 6 of 11
Hand protection:
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes
permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time
as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy
with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably
shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.
temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Eye protection:
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing.
Skin protection:
Suitable protective clothing
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
liquid
grey
Odor
characteristic
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Initial boiling point
0 °C (32 °F)
Flash point
-60 °C (-76 °F)
Decomposition temperature
No data available / Not applicable
Vapour pressure
(20 °C (68 °F))
2100 mbar
Density
(20 °C (68 °F))
0,692 g/cm3
Bulk density
No data available / Not applicable
Viscosity
No data available / Not applicable
Viscosity (kinematic)
No data available / Not applicable
Explosive properties
No data available / Not applicable
Solubility (qualitative)
(Solvent: Water)
Not miscible
Solidification temperature
No data available / Not applicable
Melting point
No data available / Not applicable
Flammability
No data available / Not applicable
Auto-ignition temperature
No data available / Not applicable
Explosive limits
lower
upper
0,7 %(V)
10,9 %(V)
Partition coefficient: n-octanol/water
No data available / Not applicable
Evaporation rate
No data available / Not applicable
Vapor density
No data available / Not applicable
Oxidising properties
No data available / Not applicable
9.2. Other information
Ignition temperature
200 °C (392 °F)
SECTION 10: Stability and reactivity
10.1. Reactivity
None known
10.2. Chemical stability
Stable under recommended storage conditions.