Certifications 2

ManualsBrandsLOCTITE® ManualsCare ProductsLOCTITE® LB 8065 Anti-Seize 525381 20 g

MSDS-No.: 153550

V005.0

LOCTITE LB 8065 known as Loctite 8065

Page 5 of 9

naphthenic

64742-53-6

[MINERAL OIL USED IN METAL

WORKING, INHALABLE FRACTION]

(TWA):

Quartz (SiO2)

14808-60-7

[QUARTZ, RESPIRABLE DUST (SEE

CRYSTALLINE SILICA)]

0,1

Time Weighted Average

(TWA):

IR_OEL

Biological Exposure Indices:

None

8.2. Exposure controls:

Respiratory protection:

Ensure adequate ventilation.

An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly

ventilated area

Filter type: A

Hand protection:

Chemical-resistant protective gloves (EN 374).

Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes

permeation time as per EN 374):

nitrile rubber (NBR; >= 0.4 mm thickness)

Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time

as per EN 374):

nitrile rubber (NBR; >= 0.4 mm thickness)

This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy

with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably

shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.

temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eye protection:

Wear protective glasses.

Skin protection:

Wear suitable protective clothing.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance

solid

light brown

Odor

mild

Odour threshold