Certifications 2
MSDS-No.: 242144
V006.0
LOCTITE LB 8008 C5-A known as Copper Anti-Seize Lubricant
Page 6 of 11
Hand protection:
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes
permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time
as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy
with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably
shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.
temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Eye protection:
Wear protective glasses.
Skin protection:
Wear suitable protective clothing.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
paste
copper
Odor
mild
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Initial boiling point
> 260 °C (> 500 °F)
Flash point
> 93 °C (> 199.4 °F)
Decomposition temperature
No data available / Not applicable
Vapour pressure
< 0,6 mbar
Density
()
1,3 g/cm3
Bulk density
No data available / Not applicable
Viscosity
No data available / Not applicable
Viscosity (kinematic)
No data available / Not applicable
Explosive properties
No data available / Not applicable
Solubility (qualitative)
(Solvent: Water)
Insoluble
Solidification temperature
No data available / Not applicable
Melting point
No data available / Not applicable
Flammability
No data available / Not applicable
Auto-ignition temperature
No data available / Not applicable
Explosive limits
No data available / Not applicable
Partition coefficient: n-octanol/water
No data available / Not applicable
Evaporation rate
No data available / Not applicable
Vapor density
No data available / Not applicable
Oxidising properties
No data available / Not applicable
9.2. Other information
No data available / Not applicable
SECTION 10: Stability and reactivity
10.1. Reactivity
Reaction with strong acids.
Reacts with strong oxidants.
10.2. Chemical stability
Stable under recommended storage conditions.