Certifications 2

SDS No.: 173255 V003.4
LOCTITE 4062
Page 4 of 13
6.3. Methods and material for containment and cleaning up
Do not use cloths for mopping up. Flood with water to complete polymerization and scrape off the floor. Cured material can be
disposed of as non-hazardous waste.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Ventilation (low level) is recommended when using large volumes
Use of dispensing equipment is recommended to minimise the risk of skin or eye contact
Avoid skin and eye contact.
See advice in section 8
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
Good industrial hygiene practices should be observed.
7.2. Conditions for safe storage, including any incompatibilities
Refer to Technical Data Sheet
7.3. Specific end use(s)
Adhesive
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Valid for
Great Britain
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
Ethyl 2-cyanoacrylate
7085-85-0
[ETHYL CYANOACRYLATE]
0,3
1,5
Short Term Exposure
Limit (STEL):
EH40 WEL
Hydroquinone
123-31-9
[HYDROQUINONE]
0,5
Time Weighted Average
(TWA):
EH40 WEL
Occupational Exposure Limits
Valid for
Ireland
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
Ethyl 2-cyanoacrylate
7085-85-0
[ETHYL CYANOACRYLATE]
0,2
Time Weighted Average
(TWA):
IR_OEL
Hydroquinone
123-31-9
[HYDROQUINONE]
0,5
Time Weighted Average
(TWA):
IR_OEL