Certifications 2

SDS No.: 153750 V004.0
LOCTITE LB 8012 known as Loctite 8012 Moly EDFN_SFDN
Page 3 of 10
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Avoid skin and eye contact.
Ensure adequate ventilation.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Use only in well-ventilated areas.
Vapours should be extracted to avoid inhalation.
Prolonged or repeated skin contact should be avoided
Avoid skin and eye contact.
See advice in section 8
Hygiene measures:
Wash hands before work breaks and after finishing work.
Do not eat, drink or smoke while working.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool, well-ventilated place.
Keep away from heat and direct sunlight.
Refer to Technical Data Sheet
7.3. Specific end use(s)
Lubricant