Certifications 2

MSDS-No.: 283259
V003.1
LOCTITE LB 8192 known as LOCTITE 8192 400ML En/De/Fr/Nl.
Page 5 of 11
Derived No-Effect Level (DNEL):
Name on list
Application
Area
Route of
Exposure
Health Effect
Exposure
Time
Value
Remarks
Propan-2-ol
67-63-0
Workers
Dermal
Long term
exposure -
systemic effects
888 mg/kg bw/day
Propan-2-ol
67-63-0
Workers
Inhalation
Long term
exposure -
systemic effects
500 mg/m3
Propan-2-ol
67-63-0
general
population
Dermal
Long term
exposure -
systemic effects
319 mg/kg bw/day
Propan-2-ol
67-63-0
general
population
Inhalation
Long term
exposure -
systemic effects
89 mg/m3
Propan-2-ol
67-63-0
general
population
oral
Long term
exposure -
systemic effects
26 mg/kg bw/day
Biological Exposure Indices:
None
8.2. Exposure controls:
Respiratory protection:
Do not inhale vapors and fumes.
Use only in well-ventilated areas.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly
ventilated area
Filter type: A
Hand protection:
Chemical-resistant protective gloves (EN 374).
Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes
permeation time as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time
as per EN 374):
nitrile rubber (NBR; >= 0.4 mm thickness)
This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy
with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably
shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g.
temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Eye protection:
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing.
Skin protection:
Suitable protective clothing
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance
liquid
Aerosol
white
Odor
characteristic
Odour threshold
No data available / Not applicable
pH
No data available / Not applicable
Initial boiling point
-44 °C (-47.2 °F)
Flash point
-97 °C (-142.6 °F)
Decomposition temperature
No data available / Not applicable