Owner's manual

PG 6
PG 6
PG 7
The LS-90 will generate a simple program for you. It will assume you are home on the weekend and
just apply your wake-up and evening temp choices. Your LS-90 is now programmed and ready to go.
No additional updates are needed. If you would like to ne-tune the LS-90 programming, including
adding or deleting time periods, or reviewing your schedule, please refer to the instructions that follow
regarding programming using the Calendar method.
Calendar Programming Method -
You can use the Calendar screen to review
your current LS-90 schedule, or to make
changes after programming in Interview
mode. To create a whole new program:
(With the LS-90 in HEAT or COOL mode)
1. Press MENU and then touch PROGRAM
in the upper left of the screen.
2. Touch the CALENDAR icon
on the
left side of the screen. A schedule of times
slots with temperatures for today will appear
on the screen.
3. Select a time period or temperature by
touching it, and use the +/- buttons to adjust
up or down. (Press and hold down +/-
buttons for faster scrolling.)
<Monday>
COPY>
HEAT
7
:
00am 75
o
F
9 : 00am 55
o
F
11
:
55am 75
o
F
2
:
55pm 85
o
F
MTW
I
A
B
delete
CALENDAR SCREEN
copy these
time/temps to
the next day
DAY advance
to next day
Calendar
Interview
A/
B selector
- use this
to make
and save
an alternate
program
touch here to
create a new
time slot