Full Product Manual

Option 1 - Entering Correct Access Code
Activate the keypad by pressing and holding for 3 seconds. Enter the correct
Access Code twice (2) when the keypad is available, pressing after every time
the Access Code is entered.
Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered
within 5 minutes. A 15 second video will be recorded once the lock entered into Safe
Mode. When in Safe Mode, the lock status icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the
correct Access Code twice in a row. Activate the keypad by pressing and holding for
3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice, pressing
after every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.
4.6 Disabling Safe Mode
Option 2 - Lockly App
Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door.
If you have not downloaded the app to use with your smart lock, you won’t be able
to use this option to disable Safe Mode.
Option 3 - Physical Key
There is a pair of keys supplied with your new lock. You may use the keys to manually
unlock the door and disable Safe Mode. To learn how to use your physical keys, see
Section 4.3.
Option 4 - Registered Fingerprint
Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate
the keypad once a registered fingerprint is used.
There are four (4) ways to disable Safe Mode.
SECTION 4.619