Full Product Manual

4.1 Locking/Unlocking with Access Codes
Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code,
registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock,
or voice.
OK Button
Three consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.6)
Lock your Lockly by pressing the OK Button or by brushing your hand across the screen
anytime when the door is closed. The smart lock will also auto-lock after unlocking based
on your set auto-lock settings.
Slide your hand across the screen to activate
the keypad.
Enter your 6 to 8 digit Access Code followed
by the OK button. Press OK anytime to reset if
you entered the wrong digit.
If the Access Code entered is correct, the door
will unlock. If the Access Code entered is
incorrect, Lockly will flash red light.
Hold OK Button (3 sec)
You may toggle between two types of keypad
displays to enter your Access Code. The fixed digit
version and the PIN Genie version (Recommended).
Press and hold the OK Button for 3 seconds to
toggle back and forth between the two keypads.
(Sample display shown only)
PIN Genie
Fixed Digit
SECTION 4.113