Full Product Manual

SECTION 2.7 8
2.7 Changing The Battery
Under normal use, the Lockly Vision
TM
battery will last up to 8 months. Please change your
batteries when the low battery notification is issued. For best practice, always use new
Alkaline batteries by a major brand.
Do not pull the ribbon. Remove top layer of batteries using
your finger tips. Push the batteries against the spring to
loosen and remove one by one.
Gently pull the ribbon to remove the bottom layer of
batteries.
Use ONLY new Alkaline batteries and do not mix new with
used batteries as replacement. First, place the ribbon
inside then insert 4 batteries on the bottom layer according
to polarity.
Continue to install the 4 batteries on the top layer, then
reinstall the battery cover and screw.
- Make sure the batteries are oriented correctly by matching the orientation displayed.
- Replacing the batteries do not reset stored Access Codes.
- To see a list of recommended brands, please visit http://Lockly.com/battery.
Be sure to unscrew the screw located on the top of the cover before sliding the cover
up.
Whenever batteries are replaced, reconnecting the smart lock to
your smartphone App is required. If you have not yet downloaded
the app, visit: Lockly.com/app
NOTICE
A
B
C
+
-
-
-
+
+
+
-