User's Manual

SECTION 4.2 17
4.2 Unlocking/Locking with Fingerprints
To lock the Lockly Guard, for the Latch
Lock Body version press the OK Button
anytime when the door is opened. For
the DeadBolt Lock Body, Hook Bolt
Lock Body and Exit Device Push Bar
you need to manually lift the handle to
lock.
Locking
Place a registered finger to the
fingerprint scanner located on the
exterior handle of the lock.
To register a fingerprint, please see
Section 3.7.
If your fingerprint is registered and
acknowledged, you will hear a
“beep” sound and a Green LED will
light up on the fingerprint scanner.
You
can then push down the
handle and
open the door.
If you see a Red LED, it means your
fingerprint is not recognized. Try
again or use another registered
fingerprint.
For best fingerprint scanning practic-
es, see Section 3.8.
Unlocking
OK Button