Installation Guide

1 " - 2"

(35mm - 50mm)

2 "

54mm

25mm

Backset

" (60mm)

or 2

" (70mm)

IMPORTANT NOTICE

* You are not required to drill an extra hole on your door. We have provided 3M double sided

tape for you to help stabilize the lock during installation. Only drill a hole if you wish to have

added stability. Please refer to the provided template for drilling if needed.

Measure and confirm your door is

between

1 " - 2" (

35mm - 50mm).

Measure and confirm the hole in the

door is

2 "

(54mm).

Measure and confirm that the

backset is between

2 "

(60mm) to

2 "

(70mm).

Measure and confirm that hole in the

door edge is 1” (25mm).

1.3

1.4

1.5

1.6