Full Product Manual

16 SECTION 3.6
3.6 Adding a Fingerprint
Fingerprint Pattern with
Cross Intersection Lines
Concentric or Parallel Pattern
with no Cross Intersection Lines
Fingerprint with Scars or
Worn Out Ridges
OK Not OK Not OK
In this section, you will learn how to register a fingerprint to your new smart lock. Fingerprint
registration is only available in the Lockly™ Secure Plus / Pro .
We are using an advanced biometric sensor, providing the most secure fingerprint
authentication.
For security reasons, Lockly™ will only accept fingerprint patterns that
consist of cross intersection points. Patterns with no cross intersection points will not be
acceptable.
Please check your fingers before registration to make sure the finger you want to register will
be acceptable by our system. Otherwise, use an alternative finger to ensure successful
registration.
The following examples show which types of fingerprint patterns will be acceptable. It is
highly recommended to enroll at least one finger from each hand in case the hand you are
using is unavailable, such as, in instances like if you are holding items in that hand or have
sustained an injury.
Your smart lock can register up to ninety-nine (99) fingerprints. Please read the following
sections if you want to add or delete fingerprints. We recommend using your app to add
fingerprints, however, the following section can show you how to add and remove
fingerprints if you did not pair your lock with a smart phone.