Full Product Manual

8.1 Cleaning
Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and
DON’Ts below.
DON’TDO
•
Rinse the touchscreen with warm water
prior to cleaning.
• Use the application of soap with a
damp, lukewarm cloth.
• Air dry or wipe dry with a soft microfiber
cloth to avoid scratches.
• Don’t use abrasives, high alkaline cleaners,
or gasoline to clean your lock.
• Don’t apply cleaning detergent directly
in sunlight or at high temperatures.
• Don’t leave cleaning detergent on the
display keypad for long periods of time -
wash immediately.
• Don’t use scrapers, squeegees, or razors.
8.2 Calibrating the Lock
SECTION 8.1 ~ 8.2 35
example: 135790+1234+
If the lock was not used for a long period of time, the lubrication of the inside mechanism may affect
its unlocking responses. Dust and freezing temperatures may also cause your lock to delay or not to
respond to unlocking. Calibrate your lock to maintain its responsiveness.
Calibration may take 60 seconds to finish. You will hear the lock unlocking for multiple times. The
unlocking sound will stop once the calibration is finished.
To calibrate the lock, enter access code + 1234 + .
NOTE: You may also calibrate the lock using the Lockly App. Open the app, select the lock and go to
> Settings > Calibrate.