Full Product Manual

SECTION 4.2

4.2 Unlocking Lockly using Fingerprints

Place a registered finger to the fingerprint scanner

located on the exterior side of the lock to the right.

To register a fingerprint, please see Section 3.6.

If your fingerprint is registered and acknowledged,

you will hear a “beep” sound and a Green LED will

light up on the fingerprint scanner. You can then

push down the handle and open the door.

If you see a Red LED, it means your fingerprint is not

recognized. Try again or use another registered

fingerprint.

For best fingerprint scanning practices, see Section

3.7.

Locking

Unlocking

To lock your smart lock, Swipe your hand across

touchscreen The lock should close (lock). If the

touchscreen is ON, touch , the lock should lock

as well.