Full Product Manual

4.1 Unlocking using Access Codes
Slide your hand across the screen to activate the keypad.
Enter your 6 to 8 digit Access Code followed by the OK
button. Press OK anytime to reset if you entered the
wrong digit.
If the Access Code entered is correct, the door will unlock.
If the Access Code entered is incorrect, Lockly will beep twice.
Five consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.7)
Lock your Lockly by pressing the OK Button or by brushing your hand across the screen anytime when
the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock settings.
You may toggle between two types of keypad displays
to enter your Access Code. The fixed digit version and
the PIN Genie version (Recommended). Press and hold
the OK Button for 3 seconds to toggle back and forth
between the two keypads.
(Sample display shown only)
Hold OK (3 sec)
PIN Genie
Fixed Digit
Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered
fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice (Secure Pro
only or Secure Plus with Secure Link Wi-Fi Hub installed)
23SECTION 4.1
OK Button