Full Product Manual

SECTION 3.9 21
3.9 Deleting Stored Fingerprints*
While in Programming Mode, select
“2DE” to delete a Fingerprint. If you
are not in Programming Mode, please
see Section 3.2 to enter Programming
Mode.
After pressing “2DE” to delete, press
“FP” to delete a fingerprint.
Your registered fingerprint numbers
will be displayed on the screen. Tap
number to rotate to the next registered
fingerprint. When you have found
the fingerprint ID you want to delete,
press and hold the OK button for 3
seconds to delete. (Example shown -
“02”)
You will then see a confirmation
page displaying and with
the fingerprint number you are
deleting displayed in the lower left.
Select Y to delete or N to cancel.
Alternatively, while on Programming
Mode, select 2DE, then press FP and
place the registered fingerprint you
want to delete on the fingerprint
sensor. Your smart lock will identify
the fingerprint and jump to confir-
mation page displaying Y and N.
Select Y to delete or N to cancel.
OK Button
Fingerprint ID Number
* Only works when lock is not paired with a smart phone device. If paired to a device please delete your
fingerprints from the administrative device paired to your lock.