Full Product Manual

SECTION 3.1 9
3.1 Configuring Access
The Default Access Code is
NOTICE
1 2 3 4 5 6
How to Use the Keypad
There are a total of five (5) buttons on the keypad as shown in the
example image to the left. The numbers in each button may differ
than what is shown on your device than what is displayed here.
To enter your required digit, just simply press the circle where your
number is shown. You do not need to press the actual number as
anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be pressing this
button when you are done entering your Access Code.
OK Button
We recommend pairing your lock to your smart phone to manage your access
codes. Section 3.1 - 3.11 refers to locks not paired with a smart phone. Once
paired with a smart phone, the Program button will be disabled.
Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is
entered, the Default Access Code of 123456 would be deleted. A maximum of 33 sets of Access Codes
can be stored for use at any given time. To add more than 33 sets of Access Codes, you must delete
an existing Access Code before adding a new code.
There are different types of Access Codes that can be generated using the Lockly app. Each type of
access code have different levels of permission you can select for your guests, tenants, deliveries,
helpers, etc., Get the latest updates on access codes, visit: support.lockly.com/faq/accesscodes/