Installation Guide

4
INSTALLING THE LOCKSET
Step 1
Facing the door exterior, install the lockset according to the in-swing or out-swing opening direction
of your door.
Secure lockset with provided G screws.
LEFT OUT-SWING DOOR
LEFT IN-SWING DOOR
RIGHT OUT-SWING DOOR
RIGHT IN-SWING DOOR
Inside
Inside
Outside
Outside
Inside
Outside
Inside
Outside
(a)
To ensure normal functions and stable long-term operation of
this lockset, replace your door’s old lockset with the provided
Lockly lockset. The included lockset is designed and optimized
for Lockly smart locks.
Measure the distance between center of front door hole to
the edge of your door. Push the shaft (a) to adjust the lockset
to 2-3/8"(60mm) or 2-3/4"(70mm).
2-3/4"
(70mm)
2-3/8"
(60mm)
Note: the shaft's horizontal
and vertical aligment must
be sustained during installa-
tion to ensure latch will fully
extend and lock securely.