Installation Guide

Preparation

1-3/8" ~ 2"

(35mm ~ 50mm)

2-1/8"

54mm

4-1/8"

105mm

25mm

Backset

IMPORTANT NOTICE

1/2"

12mm

2-3/8" (60mm)

or 2-3/4" (70mm)

Measure and confirm your door is between

1-3/8" ~

2" (

35mm - 50mm).

Measure and confirm the hole in the door

door is 2-1/8" (54mm).

Measure and confirm that the backset is

between 2-3/8" (60mm) to 2-3/4" (70mm).

Measure and confirm that hole in the door

edge is 1" (25mm).

You are not required to drill an extra hole in your door. We have provided double-sided

adhesive tape for you to help stabilize the lock during installation. Only drill a hole if you

wish to have added stability. Please refer to the provided template for drilling if needed.

Use goggles to protect your eyes if you need to drill door holes.

Remove existing door hardware, latch or deadbolts before installing the new lock.

Use provided template to bore new holes if needed.

*Optional