Installation Guide

INSTALLING THE LOCK (INTERIOR)

Step 5

continued

Align the square rod to the lock interior and attach

the Interior lock to the Interior mounting plate.

While you are doing so, gently push some of the excess

cable through the rectangular hole into the door.

Place the remaining cable against

the interior side of the lock interior

so the lock interior sits securely

onto the mounting plate.

Plug X cable that is coming through the door into the lock interior Y .

Match red side of the plug with red on socket - insert tightly.

Make sure the cable is away and

not tangling with the square rod C

IMPORTANT:

If you need to disconnect this cable, use a

screwdriver to hold down the tab (marked

red) before carefully unplugging. DO NOT

FORCE as this may result in damaging the

lock.

Install Cable Remove Cable