Quick Installation Guide

Hardware Overview
3
LED Indicators
Wi-Fi Signal
POWER
LAN/WAN
WPS
ON: The Device is powered on
OFF: The Device is not receiving electrical power.
ON: The Ethernet port is connected.
OFF: The Ethernet port is disconnected.
Flashing: Transferring data to/from a network device
Slow Flashing: The Device is trying to connect to your PC or Phone
Fast Flashing: The Device is connecting to your AP/Router
WPS Button:
Press and hold for 2 seconds, the Device is trying to connect to your PC or Phone .
Press and hold for 6 seconds to connect to your Wi-Fi Repeater Mode.
Reset Button: Press and hold for 3 seconds to Reset the Device.
Mode
Repeater
Wi-Fi Signal Status LED
ON
ON
ON
ON
OFF OFF
OFF OFF
OFF
ON ON
Flashing
Description
Better reception
signal strength 75% to 100%
Good reception
signal strength 50% to 75%
Weak reception
signal strength below 50%
Disconnected
1. Launch a web browser and type http://ap.setup
in the address field. Enter admin (all lowercase)
to login.
3. Select a Wi-Fi SSID of your router (Host Wi-Fi) and enter
the password. Either keep the same SSID as your host
Wi-Fi or create a new name for the extended network.
※Please do not install the Device in where it is heavily surrounded by things.
Please install the device as followings:
- Pictures with “ ” : Recommended
- Pictures with “ X ” : Not Recommended
2. Click “Wizard”.
Getting Started
OPTION ONE
Wi-Fi Repeater Mode
Using a Web Browser
Wi-Fi Range Extender
Quick Installation Guide
Power ON
1
Plug the Device into an electrical outlet near your
Wi-Fi router
.
If the login window does not pop up, please
refer to the FAQ > Q1.
4. Verify your wireless settings and click "Connect". The Wi-Fi Signal LEDs should turn on and stay solid,
indicating successful connections.
For Windows User For Mac OS X User
1. Disconnect the Ethernet (Wired) connection
from your laptop (if any).
2. Turn your laptop’s Wi-Fi ON if it is OFF.
3. Click the Wi-Fi icon on the top right corner
of the screen, and connect to the Device’s
network: LOCKDOWN_EXT
Not connected
Connections are available
Wireless Network Connection
LOCKDOWN_EXT
LOCKDOWN_EXT
Connect
Connect automatically
Connect to the Device
2
Configure
3
1.
Disconnect the Ethernet (Wired) connection
from your laptop (if any).
2. Turn your laptop’s Wi-Fi ON if it is OFF.
3. Click the Wi-Fi icon on the taskbar and connect
to the Device’s network: LOCKDOWN_EXT
Wi-Fi:On
Turn Wi-Fi Off
Join Other Network....
Create Network....
Open Network Preferences...
Relocate4
1. Plug the Device into an electrical outlet about halfway between your router(Host Wi-Fi) and the Wi-Fi dead zone. The location you
choose must be within the range of your existing host Wi-Fi.
2. Wait until the WLAN LEDs are ON. If the signal is weak, relocate it closer to the router to achieve a good (or better) signal quality.
Host Wi-Fi
WLAN WLAN
Tips: Use your phone to find the ideal location for the Device.
If your phone’s Wi-Fi signal(received from your router) is higher
than 3 levels, it is the ideal spot to install the Device. If not, we
suggest you to move closer to your router for better Wi-Fi signal.
Ideal Location
WLAN WLAN
Flashing
Too Far Away
Repeater Wizard
Status Wizard Wi-Fi Setup
Connect
Connect to:
Wi-Fi Password:
Repeater SSID:
Wireless_530
Wireless_530
********
LOCKDOWN_EXT
Wireless-562
Wireless-N
Wireless-112
Wireless-MO
Select a Wi-Fi Manually enter
Host Wi-Fi Name
Host Wi-Fi Password
Default Parameters
Web Setup: http://ap.setup
Default IP: 192.168.10.1
Password: admin
2.4G SSID: LOCKDOWN_EXT
Power/WPS LED
WAN/LAN LED
Wi-Fi Signal status LED
Reset Button
WPS Button
EN
Wi-Fi Setup
Status
Wizard