User's Manual

一、 User manual

二、 sketch ：

Thank you for purchasing the WiFi smart socket of our company. This product can

use app terminal and WiFi technology intelligence to realize local or remote

control socket switch function. It is the control of power supply of equipment

used in families, companies, offices, factories, shopping malls, etc。

三、 matters needing attention：

Avoid unnecessary injuries and always follow basic safety precautions

 This product is suitable for indoor use. Please do not install it in

inflammable and explosive place ，

 This product has no waterproof design and can not be drenched

There are high-voltage circuits inside. Non professionals should not open them

四、 technical specifications：

Brand: Lockdown

Product model: 1117246

Product Name: lockdown smart plug

Product diagram

五、

If the indicator is blinking fast, skip the reset step

① Power on

② Hold RESET button (switch) for 5s. (Subject to User Manual)

③ Ensure indicator light is fast blinking

Five, connect the network:

1. Preparation for use

1. Power on the socket and ensure that the mobile phone is connected to the Wi Fi network

of 2.4GHz frequency band;

2. Ensure that devices, mobile phones and routers are close to each other

3. Download and open the app: Search "doodle intelligence" in the app store or

scan the QR code on the outer package / manual to download and install the app; If

you download for the first time, please click the "create new account" button to register;

PAGE 1
一、二、 User manual sketch ： Thank you for purchasing the WiFi smart socket of our company. This product can use app terminal and WiFi technology intelligence to realize local or remote control socket switch function. It is the control of power supply of equipment used in families, companies, offices, factories, shopping malls, etc。三、 matters needing attention： Avoid unnecessary injuries and always follow basic safety precautions  This product is suitable for indoor use.
PAGE 2
If you already have an account, click the "log in with existing account" button. 2. Network access settings 1. Open the Smart Life app "my home" page, and click the Add button "+" in the upper right corner of the page; 2. Select "manual add" mode, select "electrician" on the left list page, and then select "socket"; 3.
PAGE 3
5. After adding successfully, you can see the successful sockets of distribution network on the "my home" page.
PAGE 4
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.