Install Instructions

12 Operating information

Knight XL control module

Figure 12-1 Control Panel

Use the control panel (FIG. 12-1) to set temperatures, operating conditions, and monitor boiler operation.

Installation & Operation Manual

HOME

VIEW

SETUP

INFORMATION

SETTINGS

•  e Status Section is located on the top le of the screen

and displays how the unit is currently running (i.e. O ,

Stand-by, Blocking, and Lockout) including: current

driving demand, the next Hot Water Setback scheduled,

the reason for any blocking or lockout, and a power button.

•  e Demand Section is located on the bottom le of the

screen and displays information about the targets and

limits of the current demand being serviced.

•  e Modulation Section is located on the top right of the

screen and displays the target modulation of the unit.  is

section also includes target and actual fan speeds.

•  e Sensor Section is located on the bottom right of the

screen and displays both factory installed and  eld installed

sensor including: Outdoor Air, Hot Water Temperature,

System Supply, System Return, Inlet Water, Delta T, Outlet

Water, Flue Temperature, and Flame Current.

•  e Navigation Section is located down the le side of the

screen.  ere are  ve (5) sections located below the

Lochinvar icon: Home, View, Setup, Information

(About), and Settings.  e Home Section is the screen

shown above.  e View Section provides more detailed

information including subsections for: History, Cascade,

Graphing, and a complete list of current Sensor Values.

 e Setup Section has several screens to aid in setting

up the appliance.  e Setup Section includes screens for

adjusting: Set Points, Pump Settings, Cascade, BMS, Ramp

Delay, and Night Setback.  e Information Section

provides information about the hardware and so ware

including the current so ware version of the interface, the

version of the boiler control, and the CON·X·US device

serial number.  e Setting Section enables several interface

setup features including: Time Setup, Temperature Unit

Select, Loch’n Link, System Update, and WiFi Setup.