Install Instructions

Conﬁ guration of the cascade

NOTE: For more detailed instructions, please refer to the

Knight XL Service Manual.

When installing a Cascade system, all units must be

programmed for Cascade to operate. Access the Cascade

Setup options as follows:

1. Press the SETUP button on the le side of the display

screen.

2. Enter the installer password.

3. Select the Cascade option as shown in FIG. 11-5.

4. Each unit must have a unique address set.  e leader has

more options which are described in the Knight XL

Service Manual.

5. Once all the updates are complete, press the Door Menu

slider (top le ) or the Setup button.

6. Press the APPLY CHANGES button on the top of the

screen.

NOTE:  e APPLY CHANGES button must be pressed to

complete programming of the controls. Failure to press the

APPLY CHANGES button will result in an unprogrammed

control.  e Door Menu button will become highlighted when

there are changes that can be applied.

11 Start-up

Installation & Operation Manual

Figure 11-5 Cascade Screen