Install Instructions

22
Installation & Operation Manual
 e installer must use a speci c vent starter
adapter at the  ue collar connection,
supplied by the vent manufacturer to
adapt to its vent system. See Table 3K for
approved vent adapters. Discard CPVC
starter piece.
NOTICE
3 General venting
Stainless steel vent
 is product has been approved for use with stainless steel
using the manufacturers listed in Table 3K.
Use only the materials, vent systems, and
terminations listed in Tables 3I and 3K. DO
NOT mix vent systems of di erent types or
manufacturers. Failure to comply could
result in severe personal injury, death, or
substantial property damage.
⚠ WARNING
Installations must comply with applicable
national, state, and local codes. Stainless
steel vent systems must be listed as a
UL-1738 approved system for the United
States and a ULC-S636 approved system for
Canada.
NOTICE
Installation of a stainless steel vent system
should adhere to the stainless steel vent
manufacturer’s installation instructions
supplied with the vent system.
NOTICE
Table 3L Approved Stainless Steel Terminations and Adapters
Model
DuraVent Heat Fab Z Flex
FasNSeal Saf-T Vent Z-Vent
Boiler
Adapter
Flue
Termination
Intake Air
Termination
Boiler
Adapter
Flue
Termination
Intake Air
Termination
Boiler
Adapter
Flue
Termination
Intake Air
Termination
400-500
FSA-4PVC-
4FNS
FSBS4
FSRC4(R.C)
FSAIH04
303888
9401PVC
9492
5400CI
9414TERM 2SVSLA04
2SVSTP04
2SVSRCX04
2SVSTEX0490
650-1000
810005231 FSBS6
FSAIH04
303888
9601PVC
9690
9692
9614TERM
Metal Fab Security Chimney
ICC
Corr/Guard Secure Seal VIC
400-500
4CGPVCA
4CGSWHT
4CGSWC
4CGSW90LT SS4PVCU
SS4STU
SS4RCBU
SS4ST90AU -- -- --
650-1000
6FCGPVCA
6FCGSWMC
6FCGSWC
6FCGSW90L SS6PVCU
SS6STU
SS6RCBU
SS6ST90AU
HE-6DSA-F HE-6MC-F
HE-6RC-F
HE-6E90-F
HE-6SCR-F
DIR #2000585159 00
VENT
HORIZONTAL
ADAPTER
Figure 3-5 Near Boiler Stainless Steel Venting Models
400 - 1000
Approved Stainless Steel Vent Manufacturers
Make Model
*Use of FasNSeal Flex smooth inner wall vent is to be
used in vertical or near vertical sections only, taking
precaution to ensure no sagging occurs of the vent
system. Connect to the FasNSeal rigid vent using
specially designed adapters and sealing method, see
manufacturer’s instructions.
Dura Vent (M & G Group)
FasNSeal Vent / FasNSeal Flex*
Vent
Z-Flex (Nova Flex Group) Z-Vent
Heat Fab (Selkirk Corporation) Saf-T Vent
Metal Fab Corr/Guard
Security Chimney Secure Seal
ICC VIC
Van Packer UL103/UL1978
Table 3K Stainless Steel Vent Pipe and Fittings