Manual

•
Loadstar Sensors, Inc. • www.loadstarsensors.com
2
C. If you have more than 12 load cells, then you need to daisy chain the SC-1200s. Connect
SC1200-Master’s Downlink-A to SC1200-Slave’s Uplink-Y (as shown below).
Each load cell/bin combination is uniquely identified with a 8 character identifier, for example,
M50.R00.C00.S01, M50.R00.C00.S02, ...S03, etc. This depends only on the port it is
connected to, not to the scale itself.
• Attach the cable from the bin marked “…S01” to port number 1 of the SC-1200,
• Attach the cable from the bin marked “…S02” to port number 2 of the SC-1200, and
so on.
• The photo below shows 10 bins connected.