Instruction Manual

DQ-4000 DQ-4000 User's Guide
Page: 12 / 21
P/N : 033-02061 Rev. 1
3 OPERATION GUIDE
3.1 Install the software driver for the device
If ordered without LoadVUE software, the DQ-4000 is shipped with a software driver installation
disc. Please follow the instructions in the accompanying document to install the driver before
you connect the DQ-4000 to your PC.
If you ordered the DQ-4000 with LoadVUE, the LoadVUE disc contains the drivers. Please
install LoadVUE and follow the onscreen instructions to also load the drivers.
3.2 Attach Loadstar frequency-based load cells to the sensor input ports
The picture below shows the front view of the DQ-4000. If you ordered with only one load cell,
plug it in Sensor 1 port. If you ordered multiple load cells, plug them per the serial numbers and
the markings on the cable.
Figure 5: Front View – Sensor Input Ports