User's Manual

34 LS420 Universal User Manual V2.91 2003-01-21.doc
5.2 How to Remove A Sensor from the LS420
Step 1) To enter the manual calibration mode, hold the bypass button down continuously and
press the tare button once. Release the bypass button when the screen displays "Calibration
Mode".
Step 2) Press the hoist button until the sensor to be removed is shown with the correct ID and
sensor type (Load, Angle etc.). Press the tare button to remove the sensor. The display will
show "ID = 0" on the first line and "No Sensor" on the second line. Press the bypass button to
exit the manual calibration mode at any time.
5.3 Changing Sensor Configuration of the LS420
When a sensor is added or removed, the system configuration number is automatically ad-
justed. Use the table below to determine the appropriate configuration number by cross-
referencing the appropriate combination of sensors. If necessary the configuration number can
be adjusted manually. To enter the manual calibration mode, hold the bypass button down con-
tinuously and press the tare button once. Release the bypass button when the screen displays
"Calibration Mode". Press the hoist button until the screen displays "Select Configur." Use the
limit + and limit - buttons to select the appropriate configuration number. Press the bypass
button to exit the manual calibration mode at any time.
x 64 x 32 x 16 x 8 x 4
Config.
Number
Custom Length Radius Wind Angle Load
Comment
0 0 0 0 0 0 0
1 0 0 0 0 0 1 1 load sensor
2 0 0 0 0 0 2 2 load sensors
3 0 0 0 0 0 3 3 load sensors
4 0 0 0 0 1 0 1 angle sensor
5 0 0 0 0 1 1 1 load, 1 angle
6 0 0 0 0 1 2 2 load, 1 angle
7 0 0 0 0 1 3 3 load, 1 angle
8 0 0 0 1 0 0 1 wind sensor
9 0 0 0 1 0 1
10 0 0 0 1 0 2
11 0 0 0 1 0 3
12 0 0 0 1 1 0 1 angle, 1 wind
13 0 0 0 1 1 1 1 load, 1 angle, 1 wind
14 0 0 0 1 1 2 2 load, 1 angle, 1 wind
15 0 0 0 1 1 3
16 0 0 0 2 0 0 2 wind speed sensors
17 0 0 1 0 0 1
18 0 0 1 0 0 2
19 0 0 1 0 0 3
20 0 0 1 0 1 0
21 0 0 1 0 1 1 1 load, 1 angle, 1 radius
22 0 0 1 0 1 2 2 load, 1 angle, 1 radius